Commit adb3ee42 authored by Mike Frysinger's avatar Mike Frysinger Committed by Greg Kroah-Hartman

usb: musb: abstract out ULPI_BUSCONTROL register reads/writes

The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY.
However, it has no ULPI support - so there are no registers at all.
That means accesses to ULPI_BUSCONTROL have to be abstracted away
like other MUSB registers.

This fixes building for Blackfin parts again.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Acked-by: default avatarAnand Gadiyar <gadiyar@ti.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 9957dd97
......@@ -2007,7 +2007,6 @@ bad_config:
/* host side needs more setup */
if (is_host_enabled(musb)) {
struct usb_hcd *hcd = musb_to_hcd(musb);
u8 busctl;
otg_set_host(musb->xceiv, &hcd->self);
......@@ -2018,9 +2017,9 @@ bad_config:
/* program PHY to use external vBus if required */
if (plat->extvbus) {
busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL);
u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
busctl |= MUSB_ULPI_USE_EXTVBUS;
musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
musb_write_ulpi_buscontrol(musb->mregs, busctl);
}
}
......
......@@ -326,6 +326,11 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
musb_writew(mbase, MUSB_RXFIFOADD, c_off);
}
static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
{
musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
}
static inline u8 musb_read_txfifosz(void __iomem *mbase)
{
return musb_readb(mbase, MUSB_TXFIFOSZ);
......@@ -346,6 +351,11 @@ static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
return musb_readw(mbase, MUSB_RXFIFOADD);
}
static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
{
return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
}
static inline u8 musb_read_configdata(void __iomem *mbase)
{
musb_writeb(mbase, MUSB_INDEX, 0);
......@@ -510,6 +520,10 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
{
}
static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
{
}
static inline u8 musb_read_txfifosz(void __iomem *mbase)
{
}
......@@ -526,6 +540,11 @@ static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
{
}
static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
{
return 0;
}
static inline u8 musb_read_configdata(void __iomem *mbase)
{
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment