Commit aac9300d authored by David Brownell's avatar David Brownell Committed by Tony Lindgren

H4 support for tsc210x

H4 board support now lists its tsc210x touchscreen/sensor/codec chip.
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
parent 35d23ec1
......@@ -22,6 +22,8 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/spi/tsc210x.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
......@@ -418,6 +420,33 @@ static struct omap_usb_config h4_usb_config __initdata = {
#endif
};
/* ----------------------------------------------------------------------- */
static struct tsc210x_config tsc_platform_data = {
.use_internal = 1,
.monitor = TSC_VBAT | TSC_TEMP,
/* REVISIT temp calibration data -- board-specific; from EEPROM? */
.mclk = "sys_clkout",
};
static struct spi_board_info h4_spi_board_info[] __initdata = {
{
.modalias = "tsc2101",
.bus_num = 1,
.chip_select = 0,
.mode = SPI_MODE_1,
.irq = OMAP_GPIO_IRQ(93),
.max_speed_hz = 16000000,
.platform_data = &tsc_platform_data,
},
/* nCS1 -- to lcd board, but unused
* nCS2 -- to WLAN/miniPCI
*/
};
/* ----------------------------------------------------------------------- */
static struct omap_board_config_kernel h4_config[] __initdata = {
{ OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_MMC, &h4_mmc_config },
......@@ -550,6 +579,28 @@ static void __init omap_h4_init(void)
tusb_evm_setup();
#endif
/* defaults seem ok for:
* omap_cfg_reg(U18_24XX_SPI1_SCK);
* omap_cfg_reg(V20_24XX_SPI1_MOSI);
* omap_cfg_reg(T18_24XX_SPI1_MISO);
* omap_cfg_reg(U19_24XX_SPI1_NCS0);
*/
/* TSC2101 */
omap_cfg_reg(P20_24XX_GPIO93);
gpio_request(93, "tsc_irq");
gpio_direction_input(93);
omap_cfg_reg(W14_24XX_SYS_CLKOUT); /* mclk */
/* defaults seem ok for:
* omap_cfg_reg(Y15_EAC_AC_SCLK); // bclk
* omap_cfg_reg(R14_EAC_AC_FS);
* omap_cfg_reg(V15_EAC_AC_DOUT);
* omap_cfg_reg(W15_EAC_AC_DIN);
*/
spi_register_board_info(h4_spi_board_info,
ARRAY_SIZE(h4_spi_board_info));
}
static void __init omap_h4_map_io(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment