[PATCH] PATCH: libata. Add ->data_xfer method

We need to pass the device in order to do per device checks such as
32bit I/O enables. With the changes to include dev->ap we now don't have
to add parameters however just clean them up. Also add data_xfer methods
to the existing drivers except ata_piix (which is in the other block of
patches). If you reject the piix one just add a data_xfer to it...
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/scsi/libata-core.c

@@ -3527,7 +3527,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 
 /**
  *	ata_mmio_data_xfer - Transfer data by MMIO
- *	@ap: port to read/write
+ *	@dev: device for this I/O
  *	@buf: data buffer
  *	@buflen: buffer length
  *	@write_data: read/write
@@ -3538,9 +3538,10 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
  *	Inherited from caller.
  */
 
-static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
-			       unsigned int buflen, int write_data)
+void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, 
+			unsigned int buflen, int write_data)
 {
+	struct ata_port *ap = adev->ap;
 	unsigned int i;
 	unsigned int words = buflen >> 1;
 	u16 *buf16 = (u16 *) buf;
@@ -3572,7 +3573,7 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
 
 /**
  *	ata_pio_data_xfer - Transfer data by PIO
- *	@ap: port to read/write
+ *	@adev: device to target
  *	@buf: data buffer
  *	@buflen: buffer length
  *	@write_data: read/write
@@ -3583,9 +3584,10 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
  *	Inherited from caller.
  */
 
-static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
-			      unsigned int buflen, int write_data)
+void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, 
+		       unsigned int buflen, int write_data)
 {
+	struct ata_port *ap = adev->ap;
 	unsigned int words = buflen >> 1;
 
 	/* Transfer multiple of 2 bytes */
@@ -3609,39 +3611,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
 	}
 }
 
-/**
- *	ata_data_xfer - Transfer data from/to the data register.
- *	@ap: port to read/write
- *	@buf: data buffer
- *	@buflen: buffer length
- *	@do_write: read/write
- *
- *	Transfer data from/to the device data register.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-
-static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
-			  unsigned int buflen, int do_write)
-{
-	/* Make the crap hardware pay the costs not the good stuff */
-	if (unlikely(ap->flags & ATA_FLAG_IRQ_MASK)) {
-		unsigned long flags;
-		local_irq_save(flags);
-		if (ap->flags & ATA_FLAG_MMIO)
-			ata_mmio_data_xfer(ap, buf, buflen, do_write);
-		else
-			ata_pio_data_xfer(ap, buf, buflen, do_write);
-		local_irq_restore(flags);
-	} else {
-		if (ap->flags & ATA_FLAG_MMIO)
-			ata_mmio_data_xfer(ap, buf, buflen, do_write);
-		else
-			ata_pio_data_xfer(ap, buf, buflen, do_write);
-	}
-}
-
 /**
  *	ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data.
  *	@qc: Command on going
@@ -3676,17 +3645,18 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 	if (PageHighMem(page)) {
 		unsigned long flags;
 
+		/* FIXME: use a bounce buffer */
 		local_irq_save(flags);
 		buf = kmap_atomic(page, KM_IRQ0);
 
 		/* do the actual data transfer */
-		ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write);
+		ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write);
 
 		kunmap_atomic(buf, KM_IRQ0);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write);
+		ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write);
 	}
 
 	qc->cursect++;
@@ -3742,7 +3712,7 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
 	DPRINTK("send cdb\n");
 	WARN_ON(qc->dev->cdb_len < 12);
 
-	ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+	ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
 	ata_altstatus(ap); /* flush */
 
 	switch (qc->tf.protocol) {
@@ -3802,7 +3772,7 @@ next_sg:
 				       "%u bytes trailing data\n", bytes);
 
 		for (i = 0; i < words; i++)
-			ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
+			ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write);
 
 		ap->hsm_task_state = HSM_ST_LAST;
 		return;
@@ -3828,17 +3798,18 @@ next_sg:
 	if (PageHighMem(page)) {
 		unsigned long flags;
 
+		/* FIXME: use bounce buffer */
 		local_irq_save(flags);
 		buf = kmap_atomic(page, KM_IRQ0);
 
 		/* do the actual data transfer */
-		ata_data_xfer(ap, buf + offset, count, do_write);
+		ap->ops->data_xfer(qc->dev,  buf + offset, count, do_write);
 
 		kunmap_atomic(buf, KM_IRQ0);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		ata_data_xfer(ap, buf + offset, count, do_write);
+		ap->ops->data_xfer(qc->dev,  buf + offset, count, do_write);
 	}
 
 	bytes -= count;
@@ -5702,6 +5673,8 @@ EXPORT_SYMBOL_GPL(ata_port_start);
 EXPORT_SYMBOL_GPL(ata_port_stop);
 EXPORT_SYMBOL_GPL(ata_host_stop);
 EXPORT_SYMBOL_GPL(ata_interrupt);
+EXPORT_SYMBOL_GPL(ata_mmio_data_xfer);
+EXPORT_SYMBOL_GPL(ata_pio_data_xfer);
 EXPORT_SYMBOL_GPL(ata_qc_prep);
 EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
 EXPORT_SYMBOL_GPL(ata_bmdma_setup);

drivers/scsi/sata_mv.c

@@ -406,6 +406,7 @@ static const struct ata_port_operations mv5_ops = {
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
+	.data_xfer		= ata_mmio_data_xfer,
 
 	.eng_timeout		= mv_eng_timeout,
 
@@ -433,6 +434,7 @@ static const struct ata_port_operations mv6_ops = {
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
+	.data_xfer		= ata_mmio_data_xfer,
 
 	.eng_timeout		= mv_eng_timeout,
 

drivers/scsi/sata_nv.c

@@ -234,6 +234,7 @@ static const struct ata_port_operations nv_ops = {
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.eng_timeout		= ata_eng_timeout,
+	.data_xfer		= ata_pio_data_xfer,
 	.irq_handler		= nv_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.scr_read		= nv_scr_read,

drivers/scsi/sata_promise.c

@@ -137,6 +137,7 @@ static const struct ata_port_operations pdc_sata_ops = {
 	.qc_prep		= pdc_qc_prep,
 	.qc_issue		= pdc_qc_issue_prot,
 	.eng_timeout		= pdc_eng_timeout,
+	.data_xfer		= ata_mmio_data_xfer,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
 
@@ -159,6 +160,7 @@ static const struct ata_port_operations pdc_pata_ops = {
 
 	.qc_prep		= pdc_qc_prep,
 	.qc_issue		= pdc_qc_issue_prot,
+	.data_xfer		= ata_mmio_data_xfer,
 	.eng_timeout		= pdc_eng_timeout,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,

drivers/scsi/sata_qstor.c

@@ -156,6 +156,7 @@ static const struct ata_port_operations qs_ata_ops = {
 	.phy_reset		= qs_phy_reset,
 	.qc_prep		= qs_qc_prep,
 	.qc_issue		= qs_qc_issue,
+	.data_xfer		= ata_mmio_data_xfer,
 	.eng_timeout		= qs_eng_timeout,
 	.irq_handler		= qs_intr,
 	.irq_clear		= qs_irq_clear,

drivers/scsi/sata_sil.c

@@ -176,6 +176,7 @@ static const struct ata_port_operations sil_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ata_mmio_data_xfer,
 	.freeze			= sil_freeze,
 	.thaw			= sil_thaw,
 	.error_handler		= ata_bmdma_error_handler,

drivers/scsi/sata_sis.c

@@ -113,6 +113,7 @@ static const struct ata_port_operations sis_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ata_pio_data_xfer,
 	.eng_timeout		= ata_eng_timeout,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,

drivers/scsi/sata_svw.c

@@ -320,6 +320,7 @@ static const struct ata_port_operations k2_sata_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ata_mmio_data_xfer,
 	.eng_timeout		= ata_eng_timeout,
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,

drivers/scsi/sata_sx4.c

@@ -204,6 +204,7 @@ static const struct ata_port_operations pdc_20621_ops = {
 	.phy_reset		= pdc_20621_phy_reset,
 	.qc_prep		= pdc20621_qc_prep,
 	.qc_issue		= pdc20621_qc_issue_prot,
+	.data_xfer		= ata_mmio_data_xfer,
 	.eng_timeout		= pdc_eng_timeout,
 	.irq_handler		= pdc20621_interrupt,
 	.irq_clear		= pdc20621_irq_clear,

drivers/scsi/sata_uli.c

@@ -110,6 +110,7 @@ static const struct ata_port_operations uli_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ata_pio_data_xfer,
 
 	.eng_timeout		= ata_eng_timeout,
 

drivers/scsi/sata_via.c

@@ -124,6 +124,7 @@ static const struct ata_port_operations svia_sata_ops = {
 
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ata_pio_data_xfer,
 
 	.eng_timeout		= ata_eng_timeout,
 

drivers/scsi/sata_vsc.c

@@ -297,6 +297,7 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ata_pio_data_xfer,
 	.eng_timeout		= ata_eng_timeout,
 	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,

include/linux/libata.h

@@ -525,6 +525,8 @@ struct ata_port_operations {
 	void (*bmdma_setup) (struct ata_queued_cmd *qc);
 	void (*bmdma_start) (struct ata_queued_cmd *qc);
 
+	void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+
 	void (*qc_prep) (struct ata_queued_cmd *qc);
 	unsigned int (*qc_issue) (struct ata_queued_cmd *qc);
 
@@ -646,6 +648,10 @@ extern int ata_port_start (struct ata_port *ap);
 extern void ata_port_stop (struct ata_port *ap);
 extern void ata_host_stop (struct ata_host_set *host_set);
 extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
+extern void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
+			       unsigned int buflen, int write_data);
+extern void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf,
+			      unsigned int buflen, int write_data);
 extern void ata_qc_prep(struct ata_queued_cmd *qc);
 extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
 extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc);