Commit a3cabb27 authored by Uwe Koziolek's avatar Uwe Koziolek Committed by Jeff Garzik

libata: PATA-mode fixes for sis_sata

Changed PATA handler for PATA-ports used by sata_sis.
This patch was originally submitted by Jeff Garzik.

Added PCI-ID 1180 for SiS966 Controller in pata_sis.
The 1180 mode is fully compatible to other SiS PATA-controller.

The PCI-ID 1183 is SATA in PATA-emulation, but not fully compatible
to SiS5513/5518. sata_sis.c is forwarding this ID to pata_sis.
1183 is not working if simply added to pata_sis.
This handling fixes issues with SiS968.
Signed-off-by: default avatarUwe Koziolek <uwe.koziolek@gmx.net>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent e14cbfa6
......@@ -560,6 +560,40 @@ static const struct ata_port_operations sis_133_ops = {
.port_start = ata_port_start,
};
static const struct ata_port_operations sis_133_for_sata_ops = {
.port_disable = ata_port_disable,
.set_piomode = sis_133_set_piomode,
.set_dmamode = sis_133_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_133_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
.port_start = ata_port_start,
};
static const struct ata_port_operations sis_133_early_ops = {
.port_disable = ata_port_disable,
.set_piomode = sis_100_set_piomode,
......@@ -733,13 +767,20 @@ static const struct ata_port_info sis_info100_early = {
.pio_mask = 0x1f, /* pio0-4 */
.port_ops = &sis_66_ops,
};
const struct ata_port_info sis_info133 = {
static const struct ata_port_info sis_info133 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_ops,
};
const struct ata_port_info sis_info133_for_sata = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_for_sata_ops,
};
static const struct ata_port_info sis_info133_early = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
......@@ -749,7 +790,7 @@ static const struct ata_port_info sis_info133_early = {
};
/* Privately shared with the SiS180 SATA driver, not for use elsewhere */
EXPORT_SYMBOL_GPL(sis_info133);
EXPORT_SYMBOL_GPL(sis_info133_for_sata);
static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
{
......@@ -975,6 +1016,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
static const struct pci_device_id sis_pci_tbl[] = {
{ PCI_VDEVICE(SI, 0x5513), }, /* SiS 5513 */
{ PCI_VDEVICE(SI, 0x5518), }, /* SiS 5518 */
{ PCI_VDEVICE(SI, 0x1180), }, /* SiS 1180 */
{ }
};
......
......@@ -72,8 +72,8 @@ static const struct pci_device_id sis_pci_tbl[] = {
{ PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
{ PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
{ PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
{ PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/966L */
{ PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L */
{ PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */
{ PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */
{ } /* terminate list */
};
......@@ -161,7 +161,6 @@ static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
case 0x0182:
case 0x0183:
case 0x1182:
case 0x1183:
addr += SIS182_SATA1_OFS;
break;
}
......@@ -183,8 +182,8 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
pci_read_config_dword(pdev, cfg_addr, &val);
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
(pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */
......@@ -203,8 +202,8 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val
pci_write_config_dword(pdev, cfg_addr, val);
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
(pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
pci_write_config_dword(pdev, cfg_addr+0x10, val);
}
......@@ -224,8 +223,8 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
(pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
val2 = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
return (val | val2) & 0xfffffffb;
......@@ -245,8 +244,8 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
sis_scr_cfg_write(ap, sc_reg, val);
else {
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
(pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
}
}
......@@ -293,11 +292,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
/* The PATA-handling is provided by pata_sis */
switch (pmr & 0x30) {
case 0x10:
ppi[1] = &sis_info133;
ppi[1] = &sis_info133_for_sata;
break;
case 0x30:
ppi[0] = &sis_info133;
ppi[0] = &sis_info133_for_sata;
break;
}
if ((pmr & SIS_PMR_COMBINED) == 0) {
......@@ -324,14 +323,14 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
break;
case 0x1182:
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
break;
case 0x1183:
pci_read_config_dword(pdev, 0x64, &val);
if (val & 0x10000000) {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n");
} else {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
}
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
ppi[0] = &sis_info133_for_sata;
ppi[1] = &sis_info133_for_sata;
break;
}
......
......@@ -2,4 +2,4 @@
struct ata_port_info;
/* pata_sis.c */
extern const struct ata_port_info sis_info133;
extern const struct ata_port_info sis_info133_for_sata;
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment