Commit a1810b44 authored by Mark A. Greer's avatar Mark A. Greer Committed by Paul Mackerras

[POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360

Compatible names should refer to a specific version of the hardware,
without wildcards.  Change each instance of mv64x60 to mv64360, which
is the oldest version we currently support.
Signed-off-by: default avatarMark A. Greer <mgreer@mvista.com>
Signed-off-by: default avatarDale Farnsworth <dale@farnsworth.org>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent fb9d93de
......@@ -46,7 +46,7 @@
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
compatible = "marvell,mv64x60";
compatible = "marvell,mv64360";
clock-frequency = <133333333>;
reg = <0xf1000000 0x10000>;
virtual-reg = <0xf1000000>;
......@@ -74,7 +74,7 @@
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "marvell,mv64x60-mdio";
compatible = "marvell,mv64360-mdio";
PHY0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
......@@ -95,7 +95,7 @@
reg = <0x2000 0x2000>;
eth0 {
device_type = "network";
compatible = "marvell,mv64x60-eth";
compatible = "marvell,mv64360-eth";
block-index = <0>;
interrupts = <32>;
interrupt-parent = <&PIC>;
......@@ -104,7 +104,7 @@
};
eth1 {
device_type = "network";
compatible = "marvell,mv64x60-eth";
compatible = "marvell,mv64360-eth";
block-index = <1>;
interrupts = <33>;
interrupt-parent = <&PIC>;
......@@ -115,7 +115,7 @@
SDMA0: sdma@4000 {
device_type = "dma";
compatible = "marvell,mv64x60-sdma";
compatible = "marvell,mv64360-sdma";
reg = <0x4000 0xc18>;
virtual-reg = <0xf1004000>;
interrupt-base = <0>;
......@@ -125,7 +125,7 @@
SDMA1: sdma@6000 {
device_type = "dma";
compatible = "marvell,mv64x60-sdma";
compatible = "marvell,mv64360-sdma";
reg = <0x6000 0xc18>;
virtual-reg = <0xf1006000>;
interrupt-base = <0>;
......@@ -134,7 +134,7 @@
};
BRG0: brg@b200 {
compatible = "marvell,mv64x60-brg";
compatible = "marvell,mv64360-brg";
reg = <0xb200 0x8>;
clock-src = <8>;
clock-frequency = <133333333>;
......@@ -143,7 +143,7 @@
};
BRG1: brg@b208 {
compatible = "marvell,mv64x60-brg";
compatible = "marvell,mv64360-brg";
reg = <0xb208 0x8>;
clock-src = <8>;
clock-frequency = <133333333>;
......@@ -166,7 +166,7 @@
MPSC0: mpsc@8000 {
device_type = "serial";
compatible = "marvell,mpsc";
compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xf1008000>;
sdma = <&SDMA0>;
......@@ -186,7 +186,7 @@
MPSC1: mpsc@9000 {
device_type = "serial";
compatible = "marvell,mpsc";
compatible = "marvell,mv64360-mpsc";
reg = <0x9000 0x38>;
virtual-reg = <0xf1009000>;
sdma = <&SDMA1>;
......@@ -205,14 +205,14 @@
};
wdt@b410 { /* watchdog timer */
compatible = "marvell,mv64x60-wdt";
compatible = "marvell,mv64360-wdt";
reg = <0xb410 0x8>;
timeout = <10>; /* wdt timeout in seconds */
};
i2c@c000 {
device_type = "i2c";
compatible = "marvell,mv64x60-i2c";
compatible = "marvell,mv64360-i2c";
reg = <0xc000 0x20>;
virtual-reg = <0xf100c000>;
freq_m = <8>;
......@@ -226,18 +226,18 @@
PIC: pic {
#interrupt-cells = <1>;
#address-cells = <0>;
compatible = "marvell,mv64x60-pic";
compatible = "marvell,mv64360-pic";
reg = <0x0 0x88>;
interrupt-controller;
};
mpp@f000 {
compatible = "marvell,mv64x60-mpp";
compatible = "marvell,mv64360-mpp";
reg = <0xf000 0x10>;
};
gpp@f100 {
compatible = "marvell,mv64x60-gpp";
compatible = "marvell,mv64360-gpp";
reg = <0xf100 0x20>;
};
......@@ -246,7 +246,7 @@
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "marvell,mv64x60-pci";
compatible = "marvell,mv64360-pci";
reg = <0xcf8 0x8>;
ranges = <0x01000000 0x0 0x0
0x88000000 0x0 0x01000000
......@@ -285,28 +285,28 @@
};
cpu-error@0070 {
compatible = "marvell,mv64x60-cpu-error";
compatible = "marvell,mv64360-cpu-error";
reg = <0x70 0x10 0x128 0x28>;
interrupts = <3>;
interrupt-parent = <&PIC>;
};
sram-ctrl@0380 {
compatible = "marvell,mv64x60-sram-ctrl";
compatible = "marvell,mv64360-sram-ctrl";
reg = <0x380 0x80>;
interrupts = <13>;
interrupt-parent = <&PIC>;
};
pci-error@1d40 {
compatible = "marvell,mv64x60-pci-error";
compatible = "marvell,mv64360-pci-error";
reg = <0x1d40 0x40 0xc28 0x4>;
interrupts = <12>;
interrupt-parent = <&PIC>;
};
mem-ctrl@1400 {
compatible = "marvell,mv64x60-mem-ctrl";
compatible = "marvell,mv64360-mem-ctrl";
reg = <0x1400 0x60>;
interrupts = <17>;
interrupt-parent = <&PIC>;
......
......@@ -119,7 +119,7 @@ int serial_console_init(void)
if (dt_is_compatible(devp, "ns16550"))
rc = ns16550_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "marvell,mpsc"))
else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
......
......@@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(void)
* ioremap mpp and gpp registers in case they are later
* needed by prpmc2800_reset_board().
*/
np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
......
......@@ -446,22 +446,22 @@ static int __init mv64x60_device_setup(void)
int err;
id = 0;
for_each_compatible_node(np, "serial", "marvell,mpsc")
for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc")
if ((err = mv64x60_mpsc_device_setup(np, id++)))
goto error;
id = 0;
for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
for_each_compatible_node(np, "network", "marvell,mv64360-eth")
if ((err = mv64x60_eth_device_setup(np, id++)))
goto error;
id = 0;
for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c")
if ((err = mv64x60_i2c_device_setup(np, id++)))
goto error;
/* support up to one watchdog timer */
np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt");
np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt");
if (np) {
if ((err = mv64x60_wdt_device_setup(np, id)))
goto error;
......@@ -489,7 +489,7 @@ static int __init mv64x60_add_mpsc_console(void)
if (!np)
goto not_mpsc;
if (!of_device_is_compatible(np, "marvell,mpsc"))
if (!of_device_is_compatible(np, "marvell,mv64360-mpsc"))
goto not_mpsc;
prop = of_get_property(np, "block-index", NULL);
......
......@@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(void)
struct platform_device *pdev;
const unsigned int *prop;
np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
......@@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void)
{
struct device_node *np;
for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
mv64x60_add_bridge(np);
}
......@@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void)
const unsigned int *reg;
unsigned long flags;
np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
of_node_put(np);
np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
......
......@@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void)
if (!stdout)
return;
for_each_compatible_node(np, "serial", "marvell,mpsc") {
for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") {
if (np == stdout)
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment