timekeeping: Remove clocksource inline functions

The three inline functions clocksource_read, clocksource_enable and
clocksource_disable are simple wrappers of an indirect call plus the
copy from and to the mult_orig value. The functions are exclusively
used by the timekeeping code which has intimate knowledge of the
clocksource anyway. Therefore remove the inline functions. No
functional change.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134807.903108946@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

include/linux/clocksource.h

@@ -267,64 +267,6 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
 	return (u32)tmp;
 }
 
-/**
- * clocksource_read: - Access the clocksource's current cycle value
- * @cs:		pointer to clocksource being read
- *
- * Uses the clocksource to return the current cycle_t value
- */
-static inline cycle_t clocksource_read(struct clocksource *cs)
-{
-	return cs->read(cs);
-}
-
-/**
- * clocksource_enable: - enable clocksource
- * @cs:		pointer to clocksource
- *
- * Enables the specified clocksource. The clocksource callback
- * function should start up the hardware and setup mult and field
- * members of struct clocksource to reflect hardware capabilities.
- */
-static inline int clocksource_enable(struct clocksource *cs)
-{
-	int ret = 0;
-
-	if (cs->enable)
-		ret = cs->enable(cs);
-
-	/*
-	 * The frequency may have changed while the clocksource
-	 * was disabled. If so the code in ->enable() must update
-	 * the mult value to reflect the new frequency. Make sure
-	 * mult_orig follows this change.
-	 */
-	cs->mult_orig = cs->mult;
-
-	return ret;
-}
-
-/**
- * clocksource_disable: - disable clocksource
- * @cs:		pointer to clocksource
- *
- * Disables the specified clocksource. The clocksource callback
- * function should power down the now unused hardware block to
- * save power.
- */
-static inline void clocksource_disable(struct clocksource *cs)
-{
-	/*
-	 * Save mult_orig in mult so clocksource_enable() can
-	 * restore the value regardless if ->enable() updates
-	 * the value of mult or not.
-	 */
-	cs->mult = cs->mult_orig;
-
-	if (cs->disable)
-		cs->disable(cs);
-}
-
 /**
  * cyc2ns - converts clocksource cycles to nanoseconds
  * @cs:		Pointer to clocksource

kernel/time/timekeeping.c

@@ -79,7 +79,7 @@ static void clocksource_forward_now(void)
 	cycle_t cycle_now, cycle_delta;
 	s64 nsec;
 
-	cycle_now = clocksource_read(clock);
+	cycle_now = clock->read(clock);
 	cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
 	clock->cycle_last = cycle_now;
 
@@ -114,7 +114,7 @@ void getnstimeofday(struct timespec *ts)
 		*ts = xtime;
 
 		/* read clocksource: */
-		cycle_now = clocksource_read(clock);
+		cycle_now = clock->read(clock);
 
 		/* calculate the delta since the last update_wall_time: */
 		cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
@@ -146,7 +146,7 @@ ktime_t ktime_get(void)
 		nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec;
 
 		/* read clocksource: */
-		cycle_now = clocksource_read(clock);
+		cycle_now = clock->read(clock);
 
 		/* calculate the delta since the last update_wall_time: */
 		cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
@@ -186,7 +186,7 @@ void ktime_get_ts(struct timespec *ts)
 		tomono = wall_to_monotonic;
 
 		/* read clocksource: */
-		cycle_now = clocksource_read(clock);
+		cycle_now = clock->read(clock);
 
 		/* calculate the delta since the last update_wall_time: */
 		cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
@@ -274,16 +274,29 @@ static void change_clocksource(void)
 
 	clocksource_forward_now();
 
-	if (clocksource_enable(new))
+	if (new->enable && !new->enable(new))
 		return;
+	/*
+	 * The frequency may have changed while the clocksource
+	 * was disabled. If so the code in ->enable() must update
+	 * the mult value to reflect the new frequency. Make sure
+	 * mult_orig follows this change.
+	 */
+	new->mult_orig = new->mult;
 
 	new->raw_time = clock->raw_time;
 	old = clock;
 	clock = new;
-	clocksource_disable(old);
+	/*
+	 * Save mult_orig in mult so that the value can be restored
+	 * regardless if ->enable() updates the value of mult or not.
+	 */
+	old->mult = old->mult_orig;
+	if (old->disable)
+		old->disable(old);
 
 	clock->cycle_last = 0;
-	clock->cycle_last = clocksource_read(clock);
+	clock->cycle_last = clock->read(clock);
 	clock->error = 0;
 	clock->xtime_nsec = 0;
 	clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
@@ -373,7 +386,7 @@ void getrawmonotonic(struct timespec *ts)
 		seq = read_seqbegin(&xtime_lock);
 
 		/* read clocksource: */
-		cycle_now = clocksource_read(clock);
+		cycle_now = clock->read(clock);
 
 		/* calculate the delta since the last update_wall_time: */
 		cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
@@ -435,9 +448,12 @@ void __init timekeeping_init(void)
 	ntp_init();
 
 	clock = clocksource_get_next();
-	clocksource_enable(clock);
+	if (clock->enable)
+		clock->enable(clock);
+	/* set mult_orig on enable */
+	clock->mult_orig = clock->mult;
 	clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
-	clock->cycle_last = clocksource_read(clock);
+	clock->cycle_last = clock->read(clock);
 
 	xtime.tv_sec = sec;
 	xtime.tv_nsec = 0;
@@ -477,8 +493,7 @@ static int timekeeping_resume(struct sys_device *dev)
 	}
 	update_xtime_cache(0);
 	/* re-base the last cycle value */
-	clock->cycle_last = 0;
-	clock->cycle_last = clocksource_read(clock);
+	clock->cycle_last = clock->read(clock);
 	clock->error = 0;
 	timekeeping_suspended = 0;
 	write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -630,7 +645,7 @@ void update_wall_time(void)
 		return;
 
 #ifdef CONFIG_GENERIC_TIME
-	offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask;
+	offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
 #else
 	offset = clock->cycle_interval;
 #endif