Skip to content

L
linux-davinci
Commit 9e04099c authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge master.kernel.org:/home/rmk/linux-2.6-arm

parents 757e0108 41489493
Hide whitespace changes
Inline Side-by-side
Showing with 93 additions and 33 deletions
arch/arm/kernel/vmlinux.lds.S
View file @ 9e04099c
......@@ -89,13 +89,6 @@ SECTIONS
*(.got) /* Global offset table */
}
. = ALIGN(16);
__ex_table : { /* Exception table */
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
}
RODATA
_etext = .; /* End of text and rodata section */
......@@ -137,6 +130,14 @@ SECTIONS
. = ALIGN(32);
*(.data.cacheline_aligned)
/*
* The exception fixup table (might need resorting at runtime)
*/
. = ALIGN(32);
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
/*
* and the usual data section
*/
......
arch/arm/mach-l7200/core.c
View file @ 9e04099c
......@@ -7,11 +7,17 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <asm/types.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
/*
* IRQ base register
......@@ -47,6 +53,12 @@ static void l7200_unmask_irq(unsigned int irq)
{
IRQ_ENABLE = 1 << irq;
}
static struct irqchip l7200_irq_chip = {
.ack = l7200_mask_irq,
.mask = l7200_mask_irq,
.unmask = l7200_unmask_irq
};
static void __init l7200_init_irq(void)
{
......@@ -56,11 +68,9 @@ static void __init l7200_init_irq(void)
FIQ_ENABLECLEAR = 0xffffffff; /* clear all fast interrupt enables */
for (irq = 0; irq < NR_IRQS; irq++) {
irq_desc[irq].valid = 1;
irq_desc[irq].probe_ok = 1;
irq_desc[irq].mask_ack = l7200_mask_irq;
irq_desc[irq].mask = l7200_mask_irq;
irq_desc[irq].unmask = l7200_unmask_irq;
set_irq_chip(irq, &l7200_irq_chip);
set_irq_flags(irq, IRQF_VALID);
set_irq_handler(irq, do_level_IRQ);
}
init_FIQ();
......
arch/arm/mach-pxa/corgi_lcd.c
View file @ 9e04099c
......@@ -467,6 +467,7 @@ void corgi_put_hsync(void)
{
if (get_hsync_time)
symbol_put(w100fb_get_hsynclen);
get_hsync_time = NULL;
}
void corgi_wait_hsync(void)
......@@ -476,20 +477,37 @@ void corgi_wait_hsync(void)
#endif
#ifdef CONFIG_PXA_SHARP_Cxx00
static struct device *spitz_pxafb_dev;
static int is_pxafb_device(struct device * dev, void * data)
{
struct platform_device *pdev = container_of(dev, struct platform_device, dev);
return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
}
unsigned long spitz_get_hsync_len(void)
{
if (!spitz_pxafb_dev) {
spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
if (!spitz_pxafb_dev)
return 0;
}
if (!get_hsync_time)
get_hsync_time = symbol_get(pxafb_get_hsync_time);
if (!get_hsync_time)
return 0;
return pxafb_get_hsync_time(&pxafb_device.dev);
return pxafb_get_hsync_time(spitz_pxafb_dev);
}
void spitz_put_hsync(void)
{
put_device(spitz_pxafb_dev);
if (get_hsync_time)
symbol_put(pxafb_get_hsync_time);
spitz_pxafb_dev = NULL;
get_hsync_time = NULL;
}
void spitz_wait_hsync(void)
......
arch/arm/mach-pxa/generic.c
View file @ 9e04099c
......@@ -208,6 +208,11 @@ static struct platform_device pxafb_device = {
.resource = pxafb_resources,
};
void __init set_pxa_fb_parent(struct device *parent_dev)
{
pxafb_device.dev.parent = parent_dev;
}
static struct platform_device ffuart_device = {
.name = "pxa2xx-uart",
.id = 0,
......
arch/arm/mach-pxa/spitz.c
View file @ 9e04099c
......@@ -36,7 +36,6 @@
#include <asm/arch/irq.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/akita.h>
#include <asm/arch/spitz.h>
......@@ -304,7 +303,6 @@ static struct platform_device *devices[] __initdata = {
&spitzkbd_device,
&spitzts_device,
&spitzbl_device,
&spitzbattery_device,
};
static void __init common_init(void)
......@@ -328,7 +326,7 @@ static void __init common_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_mci_info(&spitz_mci_platform_data);
pxafb_device.dev.parent = &spitzssp_device.dev;
set_pxa_fb_parent(&spitzssp_device.dev);
set_pxa_fb_info(&spitz_pxafb_info);
}
......
arch/arm/mach-s3c2410/Kconfig
View file @ 9e04099c
......@@ -12,6 +12,7 @@ config MACH_ANUBIS
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
......
drivers/input/keyboard/spitzkbd.c
View file @ 9e04099c
......@@ -53,7 +53,7 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0, /* 1-16 */
0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */
SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, /* 49-64 */
SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */
SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */
SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0, /* 81-96 */
KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0 /* 97-112 */
......
include/asm-arm/arch-pxa/pxafb.h
View file @ 9e04099c
......@@ -66,4 +66,5 @@ struct pxafb_mach_info {
};
void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
void set_pxa_fb_parent(struct device *parent_dev);
unsigned long pxafb_get_hsync_time(struct device *dev);
include/asm-arm/arch-s3c2410/io.h
View file @ 9e04099c
......@@ -9,7 +9,7 @@
* 06-Dec-1997 RMK Created.
* 02-Sep-2003 BJD Modified for S3C2410
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*
* 13-Oct-2005 BJD Fixed problems with LDRH/STRH offset range
*/
#ifndef __ASM_ARM_ARCH_IO_H
......@@ -97,7 +97,7 @@ DECLARE_IO(int,l,"")
else \
__asm__ __volatile__( \
"strb %0, [%1, #0] @ outbc" \
: : "r" (value), "r" ((port))); \
: : "r" (value), "r" ((port))); \
})
#define __inbc(port) \
......@@ -110,35 +110,61 @@ DECLARE_IO(int,l,"")
else \
__asm__ __volatile__( \
"ldrb %0, [%1, #0] @ inbc" \
: "=r" (result) : "r" ((port))); \
: "=r" (result) : "r" ((port))); \
result; \
})
#define __outwc(value,port) \
({ \
unsigned long v = value; \
if (__PORT_PCIO((port))) \
__asm__ __volatile__( \
"strh %0, [%1, %2] @ outwc" \
: : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
else \
if (__PORT_PCIO((port))) { \
if ((port) < 256 && (port) > -256) \
__asm__ __volatile__( \
"strh %0, [%1, %2] @ outwc" \
: : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
else if ((port) > 0) \
__asm__ __volatile__( \
"strh %0, [%1, %2] @ outwc" \
: : "r" (v), \
"r" (PCIO_BASE + ((port) & ~0xff)), \
"Jr" (((port) & 0xff))); \
else \
__asm__ __volatile__( \
"strh %0, [%1, #0] @ outwc" \
: : "r" (v), \
"r" (PCIO_BASE + (port))); \
} else \
__asm__ __volatile__( \
"strh %0, [%1, #0] @ outwc" \
: : "r" (v), "r" ((port))); \
: : "r" (v), "r" ((port))); \
})
#define __inwc(port) \
({ \
unsigned short result; \
if (__PORT_PCIO((port))) \
__asm__ __volatile__( \
"ldrh %0, [%1, %2] @ inwc" \
: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
else \
if (__PORT_PCIO((port))) { \
if ((port) < 256 && (port) > -256 ) \
__asm__ __volatile__( \
"ldrh %0, [%1, %2] @ inwc" \
: "=r" (result) \
: "r" (PCIO_BASE), \
"Jr" ((port))); \
else if ((port) > 0) \
__asm__ __volatile__( \
"ldrh %0, [%1, %2] @ inwc" \
: "=r" (result) \
: "r" (PCIO_BASE + ((port) & ~0xff)), \
"Jr" (((port) & 0xff))); \
else \
__asm__ __volatile__( \
"ldrh %0, [%1, #0] @ inwc" \
: "=r" (result) \
: "r" (PCIO_BASE + ((port)))); \
} else \
__asm__ __volatile__( \
"ldrh %0, [%1, #0] @ inwc" \
: "=r" (result) : "r" ((port))); \
result; \
: "=r" (result) : "r" ((port))); \
result; \
})
#define __outlc(value,port) \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment