b43: Add optional verbose runtime statistics

This adds support for verbose runtime statistics.
It defaults to off and must be enabled in debugfs, if desired.
The first measurement may be incorrect, because statistics are not cleared
after they got enabled through debugfs.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/b43.h

@@ -817,6 +817,10 @@ struct b43_wldev {
 	/* Debugging stuff follows. */
 #ifdef CONFIG_B43_DEBUG
 	struct b43_dfsentry *dfsentry;
+	unsigned int irq_count;
+	unsigned int irq_bit_count[32];
+	unsigned int tx_count;
+	unsigned int rx_count;
 #endif
 };
 

drivers/net/wireless/b43/debugfs.c

@@ -689,6 +689,7 @@ static void b43_add_dynamic_debug(struct b43_wldev *dev)
 	add_dyn_dbg("debug_lo", B43_DBG_LO, 0);
 	add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0);
 	add_dyn_dbg("debug_keys", B43_DBG_KEYS, 0);
+	add_dyn_dbg("debug_verbose_stats", B43_DBG_VERBOSESTATS, 0);
 
 #undef add_dyn_dbg
 }

drivers/net/wireless/b43/debugfs.h

@@ -13,6 +13,7 @@ enum b43_dyndbg {		/* Dynamic debugging features */
 	B43_DBG_LO,
 	B43_DBG_FIRMWARE,
 	B43_DBG_KEYS,
+	B43_DBG_VERBOSESTATS,
 	__B43_NR_DYNDBG,
 };
 

drivers/net/wireless/b43/main.c

@@ -1830,6 +1830,16 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev)
 
 	/* Re-enable interrupts on the device by restoring the current interrupt mask. */
 	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
+
+#if B43_DEBUG
+	if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+		dev->irq_count++;
+		for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
+			if (reason & (1 << i))
+				dev->irq_bit_count[i]++;
+		}
+	}
+#endif
 }
 
 /* Interrupt thread handler. Handles device interrupts in thread context. */
@@ -2893,6 +2903,27 @@ static void b43_periodic_every15sec(struct b43_wldev *dev)
 
 	atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
 	wmb();
+
+#if B43_DEBUG
+	if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+		unsigned int i;
+
+		b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n",
+		       dev->irq_count / 15,
+		       dev->tx_count / 15,
+		       dev->rx_count / 15);
+		dev->irq_count = 0;
+		dev->tx_count = 0;
+		dev->rx_count = 0;
+		for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
+			if (dev->irq_bit_count[i]) {
+				b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n",
+				       dev->irq_bit_count[i] / 15, i, (1 << i));
+				dev->irq_bit_count[i] = 0;
+			}
+		}
+	}
+#endif
 }
 
 static void do_periodic_work(struct b43_wldev *dev)
@@ -3092,6 +3123,9 @@ static void b43_tx_work(struct work_struct *work)
 			dev_kfree_skb(skb); /* Drop it */
 	}
 
+#if B43_DEBUG
+	dev->tx_count++;
+#endif
 	mutex_unlock(&wl->mutex);
 }
 

drivers/net/wireless/b43/xmit.c

@@ -692,6 +692,9 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
 	ieee80211_rx(dev->wl->hw, skb);
 
+#if B43_DEBUG
+	dev->rx_count++;
+#endif
 	return;
 drop:
 	b43dbg(dev->wl, "RX: Packet dropped\n");