fec: fix FEC driver packet transmission breakage

Commit f0b3fbea ("FEC Buffer rework")
breaks transmission of packets where the skb data buffer is not memory
aligned according to FEC_ALIGNMENT. It incorrectly passes to
dma_sync_single() the buffer address directly from the skb, instead of
the address calculated for use (which may be the skb address or one of
the bounce buffers).

It seems there is no use converting the cpu address of the buffer to
a physical either, since dma_map_single() expects the cpu address and
will return the dma address to use in the descriptor. So remove the use
of __pa() on the buffer address as well.

This patch is against 2.6.30-rc5. This breakage is a regression over
2.6.30, which does not have this problem.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/fec.c

@@ -285,6 +285,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 	struct bufdesc *bdp;
+	void *bufaddr;
 	unsigned short	status;
 	unsigned long flags;
 
@@ -312,7 +313,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	status &= ~BD_ENET_TX_STATS;
 
 	/* Set buffer length and buffer pointer */
-	bdp->cbd_bufaddr = __pa(skb->data);
+	bufaddr = skb->data;
 	bdp->cbd_datlen = skb->len;
 
 	/*
@@ -320,11 +321,11 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * 4-byte boundaries. Use bounce buffers to copy data
 	 * and get it aligned. Ugh.
 	 */
-	if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
+	if (((unsigned long) bufaddr) & FEC_ALIGNMENT) {
 		unsigned int index;
 		index = bdp - fep->tx_bd_base;
 		memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len);
-		bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
+		bufaddr = fep->tx_bounce[index];
 	}
 
 	/* Save skb pointer */
@@ -336,7 +337,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Push the data cache so the CPM does not get stale memory
 	 * data.
 	 */
-	bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
+	bdp->cbd_bufaddr = dma_map_single(&dev->dev, bufaddr,
 			FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
 
 	/* Send it on its way.  Tell FEC it's ready, interrupt when done,