Skip to content

L
linux-davinci
Commit 93b1b37f authored by Vivek Natarajan's avatar Vivek Natarajan Committed by John W. Linville
Browse files
Options

ath9k: Revamp PCIE workarounds 

* Disable L1 state ONLY when device is in D3 mode.
* Clear bit 22 of register 0x4004.
* Handle power on/off properly

Not setting the workarounds properly resulted in the
disappearance of the card in certain cases.
Signed-off-by: default avatarVivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 6170cd5c
Hide whitespace changes
Inline Side-by-side
Showing with 103 additions and 72 deletions
drivers/net/wireless/ath/ath9k/hw.c
View file @ 93b1b37f
......@@ -965,7 +965,7 @@ int ath9k_hw_init(struct ath_hw *ah)
ath9k_hw_init_mode_regs(ah);
if (ah->is_pciexpress)
ath9k_hw_configpcipowersave(ah, 0);
ath9k_hw_configpcipowersave(ah, 0, 0);
else
ath9k_hw_disablepcie(ah);
......@@ -3005,9 +3005,10 @@ void ath9k_ps_restore(struct ath_softc *sc)
* Programming the SerDes must go through the same 288 bit serial shift
* register as the other analog registers. Hence the 9 writes.
*/
void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore)
void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off)
{
u8 i;
u32 val;
if (ah->is_pciexpress != true)
return;
......@@ -3017,84 +3018,113 @@ void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore)
return;
/* Nothing to do on restore for 11N */
if (restore)
return;
if (AR_SREV_9280_20_OR_LATER(ah)) {
/*
* AR9280 2.0 or later chips use SerDes values from the
* initvals.h initialized depending on chipset during
* ath9k_hw_init()
*/
for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
INI_RA(&ah->iniPcieSerdes, i, 1));
}
} else if (AR_SREV_9280(ah) &&
(ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
if (!restore) {
if (AR_SREV_9280_20_OR_LATER(ah)) {
/*
* AR9280 2.0 or later chips use SerDes values from the
* initvals.h initialized depending on chipset during
* ath9k_hw_init()
*/
for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
INI_RA(&ah->iniPcieSerdes, i, 1));
}
} else if (AR_SREV_9280(ah) &&
(ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
/* RX shut off when elecidle is asserted */
REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
/* Shut off CLKREQ active in L1 */
if (ah->config.pcie_clock_req)
REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
else
REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
/* RX shut off when elecidle is asserted */
REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
/* Shut off CLKREQ active in L1 */
if (ah->config.pcie_clock_req)
REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
else
REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
/* Load the new settings */
REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
} else {
REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
/* Load the new settings */
REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
/* RX shut off when elecidle is asserted */
REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
} else {
REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
/*
* Ignore ah->ah_config.pcie_clock_req setting for
* pre-AR9280 11n
*/
REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
/* RX shut off when elecidle is asserted */
REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
/*
* Ignore ah->ah_config.pcie_clock_req setting for
* pre-AR9280 11n
*/
REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
/* Load the new settings */
REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
}
REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
udelay(1000);
/* Load the new settings */
REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
}
/* set bit 19 to allow forcing of pcie core into L1 state */
REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
udelay(1000);
/* Several PCIe massages to ensure proper behaviour */
if (ah->config.pcie_waen) {
val = ah->config.pcie_waen;
if (!power_off)
val &= (~AR_WA_D3_L1_DISABLE);
} else {
if (AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
AR_SREV_9287(ah)) {
val = AR9285_WA_DEFAULT;
if (!power_off)
val &= (~AR_WA_D3_L1_DISABLE);
} else if (AR_SREV_9280(ah)) {
/*
* On AR9280 chips bit 22 of 0x4004 needs to be
* set otherwise card may disappear.
*/
val = AR9280_WA_DEFAULT;
if (!power_off)
val &= (~AR_WA_D3_L1_DISABLE);
} else
val = AR_WA_DEFAULT;
}
/* set bit 19 to allow forcing of pcie core into L1 state */
REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
REG_WRITE(ah, AR_WA, val);
}
/* Several PCIe massages to ensure proper behaviour */
if (ah->config.pcie_waen) {
REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
} else {
if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah))
REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT);
if (power_off) {
/*
* On AR9280 chips bit 22 of 0x4004 needs to be set to
* otherwise card may disappear.
* Set PCIe workaround bits
* bit 14 in WA register (disable L1) should only
* be set when device enters D3 and be cleared
* when device comes back to D0.
*/
else if (AR_SREV_9280(ah))
REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT);
else
REG_WRITE(ah, AR_WA, AR_WA_DEFAULT);
if (ah->config.pcie_waen) {
if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
} else {
if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
AR_SREV_9287(ah)) &&
(AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
(AR_SREV_9280(ah) &&
(AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
}
}
}
}
......
drivers/net/wireless/ath/ath9k/hw.h
View file @ 93b1b37f
......@@ -650,7 +650,7 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
const struct ath9k_beacon_state *bs);
bool ath9k_hw_setpower(struct ath_hw *ah,
enum ath9k_power_mode mode);
void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore);
void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off);
/* Interrupt Handling */
bool ath9k_hw_intrpend(struct ath_hw *ah);
......
drivers/net/wireless/ath/ath9k/main.c
View file @ 93b1b37f
......@@ -1131,7 +1131,7 @@ void ath_radio_enable(struct ath_softc *sc)
int r;
ath9k_ps_wakeup(sc);
ath9k_hw_configpcipowersave(ah, 0);
ath9k_hw_configpcipowersave(ah, 0, 0);
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);
......@@ -1202,7 +1202,7 @@ void ath_radio_disable(struct ath_softc *sc)
spin_unlock_bh(&sc->sc_resetlock);
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, 1);
ath9k_hw_configpcipowersave(ah, 1, 1);
ath9k_ps_restore(sc);
ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
}
......@@ -1942,7 +1942,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
init_channel = ath_get_curchannel(sc, hw);
/* Reset SERDES registers */
ath9k_hw_configpcipowersave(sc->sc_ah, 0);
ath9k_hw_configpcipowersave(sc->sc_ah, 0, 0);
/*
* The basic interface to setting the hardware in a good
......@@ -2170,7 +2170,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(sc->sc_ah);
ath9k_hw_configpcipowersave(sc->sc_ah, 1);
ath9k_hw_configpcipowersave(sc->sc_ah, 1, 1);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
sc->sc_flags |= SC_OP_INVALID;
......
drivers/net/wireless/ath/ath9k/reg.h
View file @ 93b1b37f
......@@ -676,8 +676,9 @@
#define AR_RC_HOSTIF 0x00000100
#define AR_WA 0x4004
#define AR_WA_D3_L1_DISABLE (1 << 14)
#define AR9285_WA_DEFAULT 0x004a05cb
#define AR9280_WA_DEFAULT 0x0040073f
#define AR9280_WA_DEFAULT 0x0040073b
#define AR_WA_DEFAULT 0x0000073f
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment