Commit 87549251 authored by Byron Bradley's avatar Byron Bradley Committed by Russell King

[ARM] 4955/1: Orion: Support the Buffalo Linkstation Pro/Live Platform

The Buffalo Linkstation Pro/Live is the same hardware as the
Kurobox Pro but without the NAND flash. This patch adds a
second MACHINE_START macro to the Kurobox setup file to minimise
code duplication.
Signed-off-by: default avatarByron Bradley <byron.bbradley@gmail.com>
Acked-by: default avatarNicolas Pitre <nico@marvell.com>
Acked-by: default avatarLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent b488a5ed
......@@ -36,6 +36,14 @@ config MACH_TS209
Say 'Y' here if you want your kernel to support the
QNAP TS-109/TS-209 platform.
config MACH_LINKSTATION_PRO
bool "Buffalo Linkstation Pro/Live"
select I2C_BOARDINFO
help
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation Pro/Live platform. Both v1 and
v2 devices are supported.
endmenu
endif
......@@ -2,5 +2,6 @@ obj-y += common.o addr-map.o pci.o gpio.o irq.o
obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
obj-$(CONFIG_MACH_TS209) += ts209-setup.o
......@@ -178,11 +178,6 @@ static struct mv_sata_platform_data kurobox_pro_sata_data = {
* General Setup
****************************************************************************/
static struct platform_device *kurobox_pro_devices[] __initdata = {
&kurobox_pro_nor_flash,
&kurobox_pro_nand_flash,
};
static void __init kurobox_pro_init(void)
{
/*
......@@ -224,12 +219,15 @@ static void __init kurobox_pro_init(void)
orion5x_gpio_set_valid_pins(0x0000000c);
platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices));
platform_device_register(&kurobox_pro_nor_flash);
if (machine_is_kurobox_pro())
platform_device_register(&kurobox_pro_nand_flash);
i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
orion5x_eth_init(&kurobox_pro_eth_data);
orion5x_sata_init(&kurobox_pro_sata_data);
}
#ifdef CONFIG_MACH_KUROBOX_PRO
MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
.phys_io = ORION5X_REGS_PHYS_BASE,
......@@ -241,3 +239,18 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
MACHINE_END
#endif
#ifdef CONFIG_MACH_LINKSTATION_PRO
MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
.phys_io = ORION5X_REGS_PHYS_BASE,
.io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
MACHINE_END
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment