Commit 87246b75 authored by Paul Walmsley's avatar Paul Walmsley Committed by Russell King

[ARM] OMAP2 SDRC: add SDRAM timing parameter infrastructure

For a given SDRAM clock rate, SDRAM chips require memory controllers
to use a specific set of timing minimums and maximums to transfer data
reliably.  These parameters can be different for different memory chips
and can also potentially vary by board.

This patch adds the infrastructure for board-*.c files to pass this
timing data to the SDRAM controller init function.  The timing data is
specified in an 'omap_sdrc_params' structure, in terms of SDRC
controller register values.  An array of these structs, one per SDRC
target clock rate, is passed by the board-*.c file to
omap2_init_common_hw().

This patch does not define the values for different memory chips, nor
does it use the values for anything; those will come in subsequent patches.

linux-omap source commit is bc84ecfc.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent f2ab9977
...@@ -185,7 +185,7 @@ out: ...@@ -185,7 +185,7 @@ out:
static void __init omap_2430sdp_init_irq(void) static void __init omap_2430sdp_init_irq(void)
{ {
omap2_init_common_hw(); omap2_init_common_hw(NULL);
omap_init_irq(); omap_init_irq();
omap_gpio_init(); omap_gpio_init();
sdp2430_init_smc91x(); sdp2430_init_smc91x();
......
...@@ -249,7 +249,7 @@ out: ...@@ -249,7 +249,7 @@ out:
static void __init omap_apollon_init_irq(void) static void __init omap_apollon_init_irq(void)
{ {
omap2_init_common_hw(); omap2_init_common_hw(NULL);
omap_init_irq(); omap_init_irq();
omap_gpio_init(); omap_gpio_init();
apollon_init_smc91x(); apollon_init_smc91x();
......
...@@ -33,7 +33,7 @@ ...@@ -33,7 +33,7 @@
static void __init omap_generic_init_irq(void) static void __init omap_generic_init_irq(void)
{ {
omap2_init_common_hw(); omap2_init_common_hw(NULL);
omap_init_irq(); omap_init_irq();
} }
......
...@@ -363,7 +363,7 @@ static void __init h4_init_flash(void) ...@@ -363,7 +363,7 @@ static void __init h4_init_flash(void)
static void __init omap_h4_init_irq(void) static void __init omap_h4_init_irq(void)
{ {
omap2_init_common_hw(); omap2_init_common_hw(NULL);
omap_init_irq(); omap_init_irq();
omap_gpio_init(); omap_gpio_init();
h4_init_flash(); h4_init_flash();
......
...@@ -98,7 +98,7 @@ static inline void __init ldp_init_smc911x(void) ...@@ -98,7 +98,7 @@ static inline void __init ldp_init_smc911x(void)
static void __init omap_ldp_init_irq(void) static void __init omap_ldp_init_irq(void)
{ {
omap2_init_common_hw(); omap2_init_common_hw(NULL);
omap_init_irq(); omap_init_irq();
omap_gpio_init(); omap_gpio_init();
ldp_init_smc911x(); ldp_init_smc911x();
......
...@@ -184,7 +184,7 @@ static int __init omap3_beagle_i2c_init(void) ...@@ -184,7 +184,7 @@ static int __init omap3_beagle_i2c_init(void)
static void __init omap3_beagle_init_irq(void) static void __init omap3_beagle_init_irq(void)
{ {
omap2_init_common_hw(); omap2_init_common_hw(NULL);
omap_init_irq(); omap_init_irq();
omap_gpio_init(); omap_gpio_init();
} }
......
...@@ -195,12 +195,12 @@ void __init omap2_map_common_io(void) ...@@ -195,12 +195,12 @@ void __init omap2_map_common_io(void)
omapfb_reserve_sdram(); omapfb_reserve_sdram();
} }
void __init omap2_init_common_hw(void) void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{ {
omap2_mux_init(); omap2_mux_init();
pwrdm_init(powerdomains_omap); pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init(); omap2_clk_init();
omap2_sdrc_init(); omap2_sdrc_init(sp);
gpmc_init(); gpmc_init();
} }
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#undef DEBUG
#include <linux/module.h> #include <linux/module.h>
#include <linux/kernel.h> #include <linux/kernel.h>
...@@ -31,9 +32,42 @@ ...@@ -31,9 +32,42 @@
#include <mach/sdrc.h> #include <mach/sdrc.h>
#include "sdrc.h" #include "sdrc.h"
static struct omap_sdrc_params *sdrc_init_params;
void __iomem *omap2_sdrc_base; void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base; void __iomem *omap2_sms_base;
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
* @r: SDRC clock rate (in Hz)
*
* Return pre-calculated values for the SDRC_ACTIM_CTRLA,
* SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
* SDRC clock rate 'r'. These parameters control various timing
* delays in the SDRAM controller that are expressed in terms of the
* number of SDRC clock cycles to wait; hence the clock rate
* dependency. Note that sdrc_init_params must be sorted rate
* descending. Also assumes that both chip-selects use the same
* timing parameters. Returns a struct omap_sdrc_params * upon
* success, or NULL upon failure.
*/
struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
{
struct omap_sdrc_params *sp;
sp = sdrc_init_params;
while (sp->rate != r)
sp++;
if (!sp->rate)
return NULL;
return sp;
}
void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
{ {
omap2_sdrc_base = omap2_globals->sdrc; omap2_sdrc_base = omap2_globals->sdrc;
...@@ -41,7 +75,7 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) ...@@ -41,7 +75,7 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
} }
/* turn on smart idle modes for SDRAM scheduler and controller */ /* turn on smart idle modes for SDRAM scheduler and controller */
void __init omap2_sdrc_init(void) void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
{ {
u32 l; u32 l;
...@@ -54,4 +88,6 @@ void __init omap2_sdrc_init(void) ...@@ -54,4 +88,6 @@ void __init omap2_sdrc_init(void)
l &= ~(0x3 << 3); l &= ~(0x3 << 3);
l |= (0x2 << 3); l |= (0x2 << 3);
sdrc_write_reg(l, SDRC_SYSCONFIG); sdrc_write_reg(l, SDRC_SYSCONFIG);
sdrc_init_params = sp;
} }
...@@ -185,11 +185,13 @@ ...@@ -185,11 +185,13 @@
#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a)) #define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a))
#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a)) #define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a))
struct omap_sdrc_params;
extern void omap1_map_common_io(void); extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void); extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void); extern void omap2_map_common_io(void);
extern void omap2_init_common_hw(void); extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) #define __arch_ioremap(p,s,t) omap_ioremap(p,s,t)
#define __arch_iounmap(v) omap_iounmap(v) #define __arch_iounmap(v) omap_iounmap(v)
......
...@@ -81,7 +81,29 @@ ...@@ -81,7 +81,29 @@
#ifndef __ASSEMBLER__ #ifndef __ASSEMBLER__
void __init omap2_sdrc_init(void); /**
* struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
* @rate: SDRC clock rate (in Hz)
* @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
* @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
* @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
* @mr: Value to program to SDRC_MR for this rate
*
* This structure holds a pre-computed set of register values for the
* SDRC for a given SDRC clock rate and SDRAM chip. These are
* intended to be pre-computed and specified in an array in the board-*.c
* files. The structure is keyed off the 'rate' field.
*/
struct omap_sdrc_params {
unsigned long rate;
u32 actim_ctrla;
u32 actim_ctrlb;
u32 rfr_ctrl;
u32 mr;
};
void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
#ifdef CONFIG_ARCH_OMAP2 #ifdef CONFIG_ARCH_OMAP2
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment