Commit 86c0ce47 authored by Grazvydas Ignotas's avatar Grazvydas Ignotas Committed by Tony Lindgren

omap: Add basic support for Pandora handheld console

This patch adds support for basic features: nand, uarts, i2c,
mmc, rtc, and usb. Also includes defconfig.
Signed-off-by: default avatarGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 6c1380c6
This diff is collapsed.
......@@ -127,6 +127,10 @@ config MACH_OVERO
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config OMAP_TICK_GPTIMER
int "GPTIMER used for system tick timer"
depends on ARCH_OMAP2 || ARCH_OMAP3
......
......@@ -78,6 +78,10 @@ obj-$(CONFIG_MACH_OVERO) += board-overo.o \
hsmmc.o \
usb-musb.o \
usb-ehci.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
hsmmc.o \
usb-musb.o \
usb-ehci.o
# TUSB 6010 chips
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
......
/*
* board-omap3pandora.c (Pandora Handheld Console)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpio.h>
#include <mach/gpmc.h>
#include <mach/hardware.h>
#include <mach/hsmmc.h>
#include <mach/nand.h>
#include <mach/usb-ehci.h>
#include <mach/usb-musb.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#define NAND_BLOCK_SIZE SZ_128K
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
static struct mtd_partition omap3pandora_nand_partitions[] = {
{
.name = "xloader",
.offset = 0, /* Offset = 0x00000 */
.size = 4 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE
}, {
.name = "uboot",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
.size = 14 * NAND_BLOCK_SIZE,
}, {
.name = "uboot environment",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */
.size = 2 * NAND_BLOCK_SIZE,
}, {
.name = "linux",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
.size = 32 * NAND_BLOCK_SIZE,
}, {
.name = "rootfs",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
.size = MTDPART_SIZ_FULL,
},
};
static struct omap_nand_platform_data omap3pandora_nand_data = {
.parts = omap3pandora_nand_partitions,
.nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions),
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
};
static struct resource omap3pandora_nand_resource[] = {
{
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap3pandora_nand_device = {
.name = "omap2-nand",
.id = -1,
.dev = {
.platform_data = &omap3pandora_nand_data,
},
.num_resources = ARRAY_SIZE(omap3pandora_nand_resource),
.resource = omap3pandora_nand_resource,
};
static void __init omap3pandora_flash_init(void)
{
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
/* find out the chip-select on which NAND exists */
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
if ((ret & 0xC00) == 0x800) {
printk(KERN_INFO "Found NAND on CS%d\n", cs);
if (nandcs > GPMC_CS_NUM)
nandcs = cs;
}
cs++;
}
if (nandcs > GPMC_CS_NUM) {
printk(KERN_INFO "NAND: Unable to find configuration "
"in GPMC\n ");
return;
}
if (nandcs < GPMC_CS_NUM) {
omap3pandora_nand_data.cs = nandcs;
omap3pandora_nand_data.gpmc_cs_baseaddr = (void *)
(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
omap3pandora_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
if (platform_device_register(&omap3pandora_nand_device) < 0)
printk(KERN_ERR "Unable to register NAND device\n");
}
}
static struct omap_uart_config omap3pandora_uart_config __initdata = {
.enabled_uarts = (1 << 2), /* UART3 */
};
static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
};
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_platform_data omap3pandora_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
.usb = &omap3pandora_usb_data,
};
static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("twl4030", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &omap3pandora_twldata,
},
};
static int __init omap3pandora_i2c_init(void)
{
omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
ARRAY_SIZE(omap3pandora_i2c_boardinfo));
/* i2c2 pins are not connected */
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
}
static void __init omap3pandora_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device omap3pandora_lcd_device = {
.name = "pandora_lcd",
.id = -1,
};
static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
{ OMAP_TAG_UART, &omap3pandora_uart_config },
{ OMAP_TAG_LCD, &omap3pandora_lcd_config },
};
static struct platform_device *omap3pandora_devices[] __initdata = {
&omap3pandora_lcd_device,
};
static void __init omap3pandora_init(void)
{
omap3pandora_i2c_init();
platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices));
omap_board_config = omap3pandora_config;
omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
omap_serial_init();
hsmmc_init();
usb_musb_init();
usb_ehci_init();
omap3pandora_flash_init();
}
static void __init omap3pandora_map_io(void)
{
omap2_set_globals_343x();
omap2_map_common_io();
}
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3pandora_map_io,
.init_irq = omap3pandora_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap_timer,
MACHINE_END
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment