Commit 84dfcb4b authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt

Merge commit 'kumar/kumar-for-2.6.28'

parents 34d81f85 672e806e
......@@ -1917,6 +1917,8 @@ platforms are moved over to use the flattened-device-tree model.
inverse clock polarity (CPOL) mode
- spi-cpha - (optional) Empty property indicating device requires
shifted clock phase (CPHA) mode
- spi-cs-high - (optional) Empty property indicating device requires
chip select active high
SPI example for an MPC5200 SPI bus:
spi@f00 {
......
......@@ -2,13 +2,13 @@
Required properties:
- device_type : Should be "board-control"
- compatible : Should be "fsl,<board>-bcsr"
- reg : Offset and length of the register set for the device
Example:
bcsr@f8000000 {
device_type = "board-control";
compatible = "fsl,mpc8360mds-bcsr";
reg = <f8000000 8000>;
};
......
......@@ -121,6 +121,14 @@
compatible = "dallas,ds1339";
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8315erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
};
spi@7000 {
......
......@@ -60,7 +60,7 @@
};
bcsr@f8000000 {
device_type = "board-control";
compatible = "fsl,mpc8323mds-bcsr";
reg = <0xf8000000 0x8000>;
};
......
......@@ -83,6 +83,14 @@
interrupts = <15 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
interrupts = <18 0x8>;
interrupt-parent = <&ipic>;
};
};
spi@7000 {
......@@ -131,6 +139,14 @@
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8349emitx",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
};
usb@22000 {
......
......@@ -81,6 +81,14 @@
interrupts = <15 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
interrupts = <18 0x8>;
interrupt-parent = <&ipic>;
};
};
spi@7000 {
......
......@@ -49,7 +49,7 @@
};
bcsr@e2400000 {
device_type = "board-control";
compatible = "fsl,mpc8349mds-bcsr";
reg = <0xe2400000 0x8000>;
};
......
......@@ -69,7 +69,7 @@
};
bcsr@1,0 {
device_type = "board-control";
compatible = "fsl,mpc8360mds-bcsr";
reg = <1 0 0x8000>;
};
};
......
......@@ -121,6 +121,14 @@
compatible = "dallas,ds1339";
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8377erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
};
i2c@3100 {
......
......@@ -121,6 +121,14 @@
compatible = "dallas,ds1339";
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8378erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
};
i2c@3100 {
......
......@@ -121,6 +121,14 @@
compatible = "dallas,ds1339";
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8379erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
};
i2c@3100 {
......
......@@ -109,7 +109,7 @@
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <14 0x2>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8536-dma-channel",
......@@ -117,7 +117,7 @@
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <15 0x2>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8536-dma-channel",
......@@ -125,7 +125,7 @@
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <16 0x2>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8536-dma-channel",
......@@ -133,7 +133,7 @@
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <17 0x2>;
interrupts = <23 2>;
};
};
......@@ -180,7 +180,7 @@
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "TSEC";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
......@@ -193,7 +193,7 @@
enet1: ethernet@26000 {
cell-index = <1>;
device_type = "network";
model = "TSEC";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
......
......@@ -52,7 +52,7 @@
};
bcsr@f8000000 {
device_type = "board-control";
compatible = "fsl,mpc8568mds-bcsr";
reg = <0xf8000000 0x8000>;
};
......
......@@ -13,8 +13,8 @@
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
ethernet0 = &enet0;
......@@ -61,7 +61,6 @@
memory {
device_type = "memory";
reg = <0x0 0x0>; // Filled by U-Boot
};
soc8572@ffe00000 {
......@@ -69,8 +68,8 @@
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
ranges = <0x0 0 0xffe00000 0x100000>;
reg = <0 0xffe00000 0 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
memory-controller@2000 {
......@@ -351,10 +350,10 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe08000 0x1000>;
reg = <0 0xffe08000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
......@@ -561,10 +560,10 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe09000 0x1000>;
reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
......@@ -598,10 +597,10 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe0a000 0x1000>;
reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <27 2>;
......
......@@ -423,7 +423,6 @@ static const struct i2c_adapter cpm_ops = {
.owner = THIS_MODULE,
.name = "i2c-cpm",
.algo = &cpm_i2c_algo,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
};
static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
......
......@@ -61,6 +61,8 @@ void of_register_spi_devices(struct spi_master *master, struct device_node *np)
spi->mode |= SPI_CPHA;
if (of_find_property(nc, "spi-cpol", NULL))
spi->mode |= SPI_CPOL;
if (of_find_property(nc, "spi-cs-high", NULL))
spi->mode |= SPI_CS_HIGH;
/* Device speed */
prop = of_get_property(nc, "spi-max-frequency", &len);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment