Commit 827ab363 authored by Kevin Hilman's avatar Kevin Hilman

ARM: DaVinci: fixup include paths after asm/arch --> mach change

Signed-off-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
parent 5ccc1c3c
......@@ -33,6 +33,7 @@
#include <asm/mach/flash.h>
#include <mach/common.h>
#include <mach/board.h>
/* other misc. init functions */
void __init davinci_psc_init(void);
......
......@@ -20,17 +20,17 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <asm/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/arch/board.h>
#include <asm/arch/serial.h>
#include <asm/arch/mux.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <asm/arch/clock.h>
#include <mach/clock.h>
#define NO_LENGTH_CHECK 0xffffffff
......
......@@ -15,11 +15,12 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#if defined(CONFIG_I2C_DAVINCI) || defined(CONFIG_I2C_DAVINCI_MODULE)
static struct resource i2c_resources[] = {
......
......@@ -30,12 +30,12 @@
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/arch/memory.h>
#include <mach/memory.h>
#include <linux/kernel.h>
#include <asm/arch/hardware.h>
#include <asm/arch/irqs.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/arch/edma.h>
#include <mach/edma.h>
static spinlock_t dma_chan_lock;
static struct device_driver edma_driver;
......
......@@ -27,9 +27,9 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/clk.h>
#include <linux/semaphore.h>
#include <asm/semaphore.h>
#include <asm/arch/i2c-client.h>
#include <mach/i2c-client.h>
static DEFINE_MUTEX(expander_lock);
static struct i2c_client *client_handle;
......
......@@ -17,7 +17,7 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <asm/arch/i2c-client.h>
#include <mach/i2c-client.h>
/* Get Ethernet address from kernel boot params */
static unsigned char cpmac_eth_string[20] = "deadbeef";
......
/*
* linux/include/asm-arm/arch-davinci/board.h
*
* Information structures for board-specific data
*
* Derived from OMAP board.h:
......
/*
* linux/include/asm-arm/arch-davinci/edma.h
*
* BRIEF MODULE DESCRIPTION
* TI DAVINCI dma definitions
*
......
......@@ -30,8 +30,8 @@
#ifndef __ASM_ARCH_DAVINCI_MCBSP_H
#define __ASM_ARCH_DAVINCI_MCBSP_H
#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#define DAVINCI_MCBSP1_BASE DAVINCI_MCBSP_BASE
#define DAVINCI_DMA_MCBSP1_RX 3
......
......@@ -27,10 +27,10 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/arch/memory.h>
#include <asm/arch/edma.h>
#include <asm/arch/irqs.h>
#include <asm/arch/mcbsp.h>
#include <mach/memory.h>
#include <mach/edma.h>
#include <mach/irqs.h>
#include <mach/mcbsp.h>
struct clk *mbspclk = NULL;
......
......@@ -32,6 +32,7 @@
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
#include <mach/board.h>
#define UART_DAVINCI_PWREMU 0x0c
......
......@@ -16,7 +16,7 @@
#include <linux/errno.h>
#include <linux/mutex.h>
#include <asm/arch/i2c-client.h>
#include <mach/i2c-client.h>
static DEFINE_MUTEX(expander_lock);
......
......@@ -40,12 +40,13 @@
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/arch/hardware.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include "davinci_mmc.h"
#include <asm/arch/edma.h>
#include <mach/edma.h>
extern void davinci_clean_channel(int ch_no);
......
......@@ -46,9 +46,9 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/arch/hardware.h>
#include <asm/arch/nand.h>
#include <asm/arch/mux.h>
#include <mach/hardware.h>
#include <mach/nand.h>
#include <mach/mux.h>
#include <asm/mach/flash.h>
......
......@@ -58,15 +58,15 @@
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/semaphore.h>
#include <asm/irq.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/semaphore.h>
#include <asm/page.h>
#include <asm/arch/memory.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <mach/memory.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
#include "davinci_emac_phy.h"
......
......@@ -30,7 +30,7 @@
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/arch/i2c-client.h>
#include <mach/i2c-client.h>
/* REVISIT
......
......@@ -13,7 +13,7 @@
#ifndef _DAVINCIFB_H_
#define _DAVINCIFB_H_
#include <asm/arch/io.h>
#include <mach/io.h>
/* Base registers */
#define VPBE_REG_BASE IO_ADDRESS(0x01c72780)
......
......@@ -30,11 +30,11 @@
#include <sound/davincisound.h>
#include <asm/uaccess.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/arch/mcbsp.h>
#include <mach/hardware.h>
#include <mach/mcbsp.h>
#include "davinci-aic33.h"
#include "davinci-audio.h"
......
......@@ -50,16 +50,16 @@
#include <linux/dma-mapping.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/semaphore.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/semaphore.h>
#include <asm/delay.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/edma.h>
#include <asm/arch/memory.h>
#include <mach/hardware.h>
#include <mach/mcbsp.h>
#include <mach/edma.h>
#include <mach/memory.h>
#include "davinci-audio-dma-intfc.h"
#include "davinci-audio.h"
......
......@@ -47,11 +47,12 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/completion.h>
#include <linux/semaphore.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/semaphore.h>
#include <mach/hardware.h>
#include "davinci-audio-dma-intfc.h"
#include "davinci-audio.h"
......
......@@ -24,7 +24,7 @@
#define __DAVINCI_AUDIO_H
/* Requires dma.h */
#include <asm/arch/dma.h>
#include <mach/dma.h>
/*
* Buffer Management
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment