x86, pci: move arch/x86/pci/pci.h to arch/x86/include/asm/pci_x86.h

Impact: cleanup

Now that arch/x86/pci/pci.h is used in a number of other places as well,
move the lowlevel x86 pci definitions into the architecture include files.
(not to be confused with the existing arch/x86/include/asm/pci.h file,
which provides public details about x86 PCI)

Tested on: X86_32_UP, X86_32_SMP and X86_64_SMP
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/pci/pci.h → arch/x86/include/asm/pci_x86.h

@@ -57,7 +57,8 @@ extern struct pci_ops pci_root_ops;
 struct irq_info {
 	u8 bus, devfn;			/* Bus, device and function */
 	struct {
-		u8 link;		/* IRQ line ID, chipset dependent, 0=not routed */
+		u8 link;		/* IRQ line ID, chipset dependent,
+					   0 = not routed */
 		u16 bitmap;		/* Available IRQs */
 	} __attribute__((packed)) irq[4];
 	u8 slot;			/* Slot number, 0=onboard */
@@ -69,11 +70,13 @@ struct irq_routing_table {
 	u16 version;			/* PIRQ_VERSION */
 	u16 size;			/* Table size in bytes */
 	u8 rtr_bus, rtr_devfn;		/* Where the interrupt router lies */
-	u16 exclusive_irqs;		/* IRQs devoted exclusively to PCI usage */
-	u16 rtr_vendor, rtr_device;	/* Vendor and device ID of interrupt router */
+	u16 exclusive_irqs;		/* IRQs devoted exclusively to
+					   PCI usage */
+	u16 rtr_vendor, rtr_device;	/* Vendor and device ID of
+					   interrupt router */
 	u32 miniport_data;		/* Crap */
 	u8 rfu[11];
-	u8 checksum;			/* Modulo 256 checksum must give zero */
+	u8 checksum;			/* Modulo 256 checksum must give 0 */
 	struct irq_info slots[0];
 } __attribute__((packed));
 
@@ -148,15 +151,15 @@ static inline unsigned int mmio_config_readl(void __iomem *pos)
 
 static inline void mmio_config_writeb(void __iomem *pos, u8 val)
 {
-	asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
+	asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
 }
 
 static inline void mmio_config_writew(void __iomem *pos, u16 val)
 {
-	asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
+	asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
 }
 
 static inline void mmio_config_writel(void __iomem *pos, u32 val)
 {
-	asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
+	asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
 }

arch/x86/kernel/mmconf-fam10h_64.c

@@ -13,8 +13,7 @@
 #include <asm/msr.h>
 #include <asm/acpi.h>
 #include <asm/mmconfig.h>
-
-#include "../pci/pci.h"
+#include <asm/pci_x86.h>
 
 struct pci_hostbridge_probe {
 	u32 bus;

arch/x86/kernel/reboot.c

@@ -12,6 +12,7 @@
 #include <asm/proto.h>
 #include <asm/reboot_fixups.h>
 #include <asm/reboot.h>
+#include <asm/pci_x86.h>
 
 #ifdef CONFIG_X86_32
 # include <linux/dmi.h>
@@ -22,8 +23,6 @@
 #endif
 
 #include <mach_ipi.h>
-#include "../pci/pci.h"
-
 
 /*
  * Power off function, if any

arch/x86/pci/acpi.c

@@ -4,7 +4,7 @@
 #include <linux/irq.h>
 #include <linux/dmi.h>
 #include <asm/numa.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 struct pci_root_info {
 	char *name;

arch/x86/pci/amd_bus.c

@@ -2,7 +2,7 @@
 #include <linux/pci.h>
 #include <linux/topology.h>
 #include <linux/cpu.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 #ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>

arch/x86/pci/common.c

@@ -14,8 +14,7 @@
 #include <asm/segment.h>
 #include <asm/io.h>
 #include <asm/smp.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;

arch/x86/pci/direct.c

@@ -5,7 +5,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 /*
  * Functions for accessing PCI base (first 256 bytes) and extended

arch/x86/pci/early.c

@@ -2,7 +2,7 @@
 #include <linux/pci.h>
 #include <asm/pci-direct.h>
 #include <asm/io.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 /* Direct PCI access. This is used for PCI accesses in early boot before
    the PCI subsystem works. */

arch/x86/pci/fixup.c

@@ -6,8 +6,7 @@
 #include <linux/dmi.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include "pci.h"
-
+#include <asm/pci_x86.h>
 
 static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 {

arch/x86/pci/i386.c

@@ -34,8 +34,8 @@
 
 #include <asm/pat.h>
 #include <asm/e820.h>
+#include <asm/pci_x86.h>
 
-#include "pci.h"
 
 static int
 skip_isa_ioresource_align(struct pci_dev *dev) {

arch/x86/pci/init.c

 #include <linux/pci.h>
 #include <linux/init.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 /* arch_initcall has too random ordering, so call the initializers
    in the right sequence from here. */

arch/x86/pci/irq.c

@@ -16,8 +16,7 @@
 #include <asm/io_apic.h>
 #include <linux/irq.h>
 #include <linux/acpi.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 #define PIRQ_SIGNATURE	(('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
 #define PIRQ_VERSION 0x0100

arch/x86/pci/legacy.c

@@ -3,7 +3,7 @@
  */
 #include <linux/init.h>
 #include <linux/pci.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 /*
  * Discover remaining PCI buses in case there are peer host bridges.

arch/x86/pci/mmconfig-shared.c

@@ -15,8 +15,7 @@
 #include <linux/acpi.h>
 #include <linux/bitmap.h>
 #include <asm/e820.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 /* aperture is up to 256MB but BIOS may reserve less */
 #define MMCONFIG_APER_MIN	(2 * 1024*1024)

arch/x86/pci/mmconfig_32.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <asm/e820.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 /* Assume systems with more busses have correct MCFG */
 #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))

arch/x86/pci/mmconfig_64.c

@@ -10,8 +10,7 @@
 #include <linux/acpi.h>
 #include <linux/bitmap.h>
 #include <asm/e820.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 /* Static virtual mapping of the MMCONFIG aperture */
 struct mmcfg_virt {

arch/x86/pci/numaq_32.c

@@ -7,7 +7,7 @@
 #include <linux/nodemask.h>
 #include <mach_apic.h>
 #include <asm/mpspec.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */

arch/x86/pci/olpc.c

@@ -29,7 +29,7 @@
 #include <linux/init.h>
 #include <asm/olpc.h>
 #include <asm/geode.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
 
 /*
  * In the tables below, the first two line (8 longwords) are the

arch/x86/pci/pcbios.c

@@ -6,9 +6,8 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
-#include "pci.h"
-#include "pci-functions.h"
-
+#include <asm/pci_x86.h>
+#include <asm/mach-default/pci-functions.h>
 
 /* BIOS32 signature: "_32_" */
 #define BIOS32_SIGNATURE	(('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))

arch/x86/pci/visws.c

@@ -9,11 +9,10 @@
 #include <linux/init.h>
 
 #include <asm/setup.h>
+#include <asm/pci_x86.h>
 #include <asm/visws/cobalt.h>
 #include <asm/visws/lithium.h>
 
-#include "pci.h"
-
 static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
 static void pci_visws_disable_irq(struct pci_dev *dev) { }
 

drivers/pci/hotplug/cpqphp_core.c

@@ -45,7 +45,7 @@
 
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"
-#include "../../../arch/x86/pci/pci.h"	/* horrible hack showing how processor dependent we are... */
+#include <asm/pci_x86.h>
 
 
 /* Global variables */

drivers/pci/hotplug/cpqphp_pci.c

@@ -37,7 +37,7 @@
 #include "../pci.h"
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"
-#include "../../../arch/x86/pci/pci.h"	/* horrible hack showing how processor dependent we are... */
+#include <asm/pci_x86.h>
 
 
 u8 cpqhp_nic_irq;

drivers/pci/hotplug/ibmphp_core.c

@@ -35,7 +35,7 @@
 #include <linux/delay.h>
 #include <linux/wait.h>
 #include "../pci.h"
-#include "../../../arch/x86/pci/pci.h"	/* for struct irq_routing_table */
+#include <asm/pci_x86.h>		/* for struct irq_routing_table */
 #include "ibmphp.h"
 
 #define attn_on(sl)  ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON)