davinci: fb: Frame Buffer driver for TI DA8xx/OMAP-L1xx

Adds LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx
architecture. LCDC specifications can be found at
http://www.ti.com/litv/pdf/sprufm0a.

LCDC on DA8xx consists of two independent controllers, the
Raster Controller and the LCD Interface Display Driver (LIDD)
controller. LIDD further supports character and graphic displays.

This patch adds support for the graphic display (Sharp LQ035Q3DG01)
found on the DA830 based EVM. The EVM details can be found at:
http://support.spectrumdigital.com/boards/dskda830/revc/.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: Steve Chen <schen@mvista.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>

drivers/video/Kconfig

@@ -2039,6 +2039,17 @@ config FB_SH7760
 	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
 	  panels <= 320 pixel horizontal resolution.
 
+config FB_DA8XX
+	tristate "DA8xx/OMAP-L1xx Framebuffer support"
+	depends on FB && ARCH_DAVINCI_DA8XX
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  This is the frame buffer device driver for the TI LCD controller
+	  found on DA8xx/OMAP-L1xx SoCs.
+	  If unsure, say N.
+
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB

drivers/video/Makefile

@@ -136,6 +136,7 @@ obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
 obj-$(CONFIG_FB_MX3)		  += mx3fb.o
+obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o

include/video/da8xx-fb.h

+/*
+ * Header file for TI DA8XX LCD controller platform data.
+ *
+ * Copyright (C) 2008-2009 MontaVista Software Inc.
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef DA8XX_FB_H
+#define DA8XX_FB_H
+
+enum panel_type {
+	QVGA = 0
+};
+
+enum panel_shade {
+	MONOCHROME = 0,
+	COLOR_ACTIVE,
+	COLOR_PASSIVE,
+};
+
+enum raster_load_mode {
+	LOAD_DATA = 1,
+	LOAD_PALETTE,
+};
+
+struct display_panel {
+	enum panel_type panel_type; /* QVGA */
+	int max_bpp;
+	int min_bpp;
+	enum panel_shade panel_shade;
+};
+
+struct da8xx_lcdc_platform_data {
+	const char manu_name[10];
+	void *controller_data;
+	const char type[25];
+};
+
+struct lcd_ctrl_config {
+	const struct display_panel *p_disp_panel;
+
+	/* AC Bias Pin Frequency */
+	int ac_bias;
+
+	/* AC Bias Pin Transitions per Interrupt */
+	int ac_bias_intrpt;
+
+	/* DMA burst size */
+	int dma_burst_sz;
+
+	/* Bits per pixel */
+	int bpp;
+
+	/* FIFO DMA Request Delay */
+	int fdd;
+
+	/* TFT Alternative Signal Mapping (Only for active) */
+	unsigned char tft_alt_mode;
+
+	/* 12 Bit Per Pixel (5-6-5) Mode (Only for passive) */
+	unsigned char stn_565_mode;
+
+	/* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */
+	unsigned char mono_8bit_mode;
+
+	/* Invert line clock */
+	unsigned char invert_line_clock;
+
+	/* Invert frame clock  */
+	unsigned char invert_frm_clock;
+
+	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
+	unsigned char sync_edge;
+
+	/* Horizontal and Vertical Sync: Control: 0=ignore */
+	unsigned char sync_ctrl;
+
+	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
+	unsigned char raster_order;
+};
+
+struct lcd_sync_arg {
+	int back_porch;
+	int front_porch;
+	int pulse_width;
+};
+
+/* ioctls */
+#define FBIOGET_CONTRAST	_IOR('F', 1, int)
+#define FBIOPUT_CONTRAST	_IOW('F', 2, int)
+#define FBIGET_BRIGHTNESS	_IOR('F', 3, int)
+#define FBIPUT_BRIGHTNESS	_IOW('F', 3, int)
+#define FBIGET_COLOR		_IOR('F', 5, int)
+#define FBIPUT_COLOR		_IOW('F', 6, int)
+#define FBIPUT_HSYNC		_IOW('F', 9, int)
+#define FBIPUT_VSYNC		_IOW('F', 10, int)
+
+#endif  /* ifndef DA8XX_FB_H */
+