Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] mpt: fix disable lsi sas to use msi as default
  [SCSI] fix ABORTED_COMMAND looping forever problem
  [SCSI] sd: revive sd_index_lock
  [SCSI] cxgb3i: update the driver version to 1.0.1
  [SCSI] cxgb3i: Fix spelling errors in documentation
  [SCSI] cxgb3i: added missing include in cxgb3i_ddp.h
  [SCSI] cxgb3i: Outgoing pdus need to observe skb's MAX_SKB_FRAGS
  [SCSI] cxgb3i: added per-task data to track transmit progress
  [SCSI] cxgb3i: transmit work-request fixes
  [SCSI] hptiop: Add new PCI device ID

Documentation/scsi/cxgb3i.txt

@@ -4,7 +4,7 @@ Introduction
 ============
 
 The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
-series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
+series of products) support iSCSI acceleration and iSCSI Direct Data Placement
 (DDP) where the hardware handles the expensive byte touching operations, such
 as CRC computation and verification, and direct DMA to the final host memory
 destination:
@@ -31,9 +31,9 @@ destination:
 	  the TCP segments onto the wire. It handles TCP retransmission if
 	  needed.
 
-	  On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+	  On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
 	  segments, separating the header and data, calculating and verifying
-	  the digests, then forwards the header to the host. The payload data,
+	  the digests, then forwarding the header to the host. The payload data,
 	  if possible, will be directly placed into the pre-posted host DDP
 	  buffer. Otherwise, the payload data will be sent to the host too.
 
@@ -68,9 +68,8 @@ The following steps need to be taken to accelerates the open-iscsi initiator:
 	sure the ip address is unique in the network.
 
 3. edit /etc/iscsi/iscsid.conf
-   The default setting for MaxRecvDataSegmentLength (131072) is too big,
-   replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
-   bigger than 15360 (for example 8192):
+   The default setting for MaxRecvDataSegmentLength (131072) is too big;
+   replace with a value no bigger than 15360 (for example 8192):
 
 	node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
 

drivers/message/fusion/mptbase.c

@@ -91,9 +91,9 @@ MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \
 		controllers (default=0)");
 
 static int mpt_msi_enable_sas;
-module_param(mpt_msi_enable_sas, int, 1);
+module_param(mpt_msi_enable_sas, int, 0);
 MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
-		controllers (default=1)");
+		controllers (default=0)");
 
 
 static int mpt_channel_mapping;

drivers/scsi/cxgb3i/cxgb3i.h

@@ -20,6 +20,7 @@
 #include <linux/list.h>
 #include <linux/netdevice.h>
 #include <linux/scatterlist.h>
+#include <linux/skbuff.h>
 #include <scsi/libiscsi_tcp.h>
 
 /* from cxgb3 LLD */
@@ -113,6 +114,26 @@ struct cxgb3i_endpoint {
 	struct cxgb3i_conn *cconn;
 };
 
+/**
+ * struct cxgb3i_task_data - private iscsi task data
+ *
+ * @nr_frags:	# of coalesced page frags (from scsi sgl)
+ * @frags:	coalesced page frags (from scsi sgl)
+ * @skb:	tx pdu skb
+ * @offset:	data offset for the next pdu
+ * @count:	max. possible pdu payload
+ * @sgoffset:	offset to the first sg entry for a given offset
+ */
+#define MAX_PDU_FRAGS	((ULP2_MAX_PDU_PAYLOAD + 512 - 1) / 512)
+struct cxgb3i_task_data {
+	unsigned short nr_frags;
+	skb_frag_t frags[MAX_PDU_FRAGS];
+	struct sk_buff *skb;
+	unsigned int offset;
+	unsigned int count;
+	unsigned int sgoffset;
+};
+
 int cxgb3i_iscsi_init(void);
 void cxgb3i_iscsi_cleanup(void);
 

drivers/scsi/cxgb3i/cxgb3i_ddp.c

@@ -639,10 +639,11 @@ static int ddp_init(struct t3cdev *tdev)
 	write_unlock(&cxgb3i_ddp_rwlock);
 
 	ddp_log_info("nppods %u (0x%x ~ 0x%x), bits %u, mask 0x%x,0x%x "
-			"pkt %u,%u.\n",
+			"pkt %u/%u, %u/%u.\n",
 			ppmax, ddp->llimit, ddp->ulimit, ddp->idx_bits,
 			ddp->idx_mask, ddp->rsvd_tag_mask,
-			ddp->max_txsz, ddp->max_rxsz);
+			ddp->max_txsz, uinfo.max_txsz,
+			ddp->max_rxsz, uinfo.max_rxsz);
 	return 0;
 
 free_ddp_map:
@@ -654,8 +655,8 @@ free_ddp_map:
  * cxgb3i_adapter_ddp_init - initialize the adapter's ddp resource
  * @tdev: t3cdev adapter
  * @tformat: tag format
- * @txsz: max tx pkt size, filled in by this func.
- * @rxsz: max rx pkt size, filled in by this func.
+ * @txsz: max tx pdu payload size, filled in by this func.
+ * @rxsz: max rx pdu payload size, filled in by this func.
  * initialize the ddp pagepod manager for a given adapter if needed and
  * setup the tag format for a given iscsi entity
  */
@@ -685,10 +686,12 @@ int cxgb3i_adapter_ddp_init(struct t3cdev *tdev,
 		      tformat->sw_bits, tformat->rsvd_bits,
 		      tformat->rsvd_shift, tformat->rsvd_mask);
 
-	*txsz = ddp->max_txsz;
-	*rxsz = ddp->max_rxsz;
-	ddp_log_info("ddp max pkt size: %u, %u.\n",
-		     ddp->max_txsz, ddp->max_rxsz);
+	*txsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+			ddp->max_txsz - ISCSI_PDU_NONPAYLOAD_LEN);
+	*rxsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+			ddp->max_rxsz - ISCSI_PDU_NONPAYLOAD_LEN);
+	ddp_log_info("max payload size: %u/%u, %u/%u.\n",
+		     *txsz, ddp->max_txsz, *rxsz, ddp->max_rxsz);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(cxgb3i_adapter_ddp_init);

drivers/scsi/cxgb3i/cxgb3i_ddp.h

@@ -13,6 +13,8 @@
 #ifndef __CXGB3I_ULP2_DDP_H__
 #define __CXGB3I_ULP2_DDP_H__
 
+#include <linux/vmalloc.h>
+
 /**
  * struct cxgb3i_tag_format - cxgb3i ulp tag format for an iscsi entity
  *
@@ -85,8 +87,9 @@ struct cxgb3i_ddp_info {
 	struct sk_buff **gl_skb;
 };
 
+#define ISCSI_PDU_NONPAYLOAD_LEN	312 /* bhs(48) + ahs(256) + digest(8) */
 #define ULP2_MAX_PKT_SIZE	16224
-#define ULP2_MAX_PDU_PAYLOAD	(ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_MAX)
+#define ULP2_MAX_PDU_PAYLOAD	(ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_LEN)
 #define PPOD_PAGES_MAX		4
 #define PPOD_PAGES_SHIFT	2	/* 4 pages per pod */
 

drivers/scsi/cxgb3i/cxgb3i_init.c

@@ -12,8 +12,8 @@
 #include "cxgb3i.h"
 
 #define DRV_MODULE_NAME         "cxgb3i"
-#define DRV_MODULE_VERSION	"1.0.0"
-#define DRV_MODULE_RELDATE	"Jun. 1, 2008"
+#define DRV_MODULE_VERSION	"1.0.1"
+#define DRV_MODULE_RELDATE	"Jan. 2009"
 
 static char version[] =
 	"Chelsio S3xx iSCSI Driver " DRV_MODULE_NAME

drivers/scsi/cxgb3i/cxgb3i_iscsi.c

@@ -364,7 +364,8 @@ cxgb3i_session_create(struct iscsi_endpoint *ep, u16 cmds_max, u16 qdepth,
 
 	cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost,
 					  cmds_max,
-					  sizeof(struct iscsi_tcp_task),
+					  sizeof(struct iscsi_tcp_task) +
+					  sizeof(struct cxgb3i_task_data),
 					  initial_cmdsn, ISCSI_MAX_TARGET);
 	if (!cls_session)
 		return NULL;
@@ -402,17 +403,15 @@ static inline int cxgb3i_conn_max_xmit_dlength(struct iscsi_conn *conn)
 {
 	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	struct cxgb3i_conn *cconn = tcp_conn->dd_data;
-	unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
-				 cconn->hba->snic->tx_max_size -
-				 ISCSI_PDU_NONPAYLOAD_MAX);
+	unsigned int max = max(512 * MAX_SKB_FRAGS, SKB_TX_HEADROOM);
 
+	max = min(cconn->hba->snic->tx_max_size, max);
 	if (conn->max_xmit_dlength)
-		conn->max_xmit_dlength = min_t(unsigned int,
-						conn->max_xmit_dlength, max);
+		conn->max_xmit_dlength = min(conn->max_xmit_dlength, max);
 	else
 		conn->max_xmit_dlength = max;
 	align_pdu_size(conn->max_xmit_dlength);
-	cxgb3i_log_info("conn 0x%p, max xmit %u.\n",
+	cxgb3i_api_debug("conn 0x%p, max xmit %u.\n",
 			 conn, conn->max_xmit_dlength);
 	return 0;
 }
@@ -427,9 +426,7 @@ static inline int cxgb3i_conn_max_recv_dlength(struct iscsi_conn *conn)
 {
 	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	struct cxgb3i_conn *cconn = tcp_conn->dd_data;
-	unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
-				 cconn->hba->snic->rx_max_size -
-				 ISCSI_PDU_NONPAYLOAD_MAX);
+	unsigned int max = cconn->hba->snic->rx_max_size;
 
 	align_pdu_size(max);
 	if (conn->max_recv_dlength) {
@@ -439,8 +436,7 @@ static inline int cxgb3i_conn_max_recv_dlength(struct iscsi_conn *conn)
 					 conn->max_recv_dlength, max);
 			return -EINVAL;
 		}
-		conn->max_recv_dlength = min_t(unsigned int,
-						conn->max_recv_dlength, max);
+		conn->max_recv_dlength = min(conn->max_recv_dlength, max);
 		align_pdu_size(conn->max_recv_dlength);
 	} else
 		conn->max_recv_dlength = max;
@@ -844,7 +840,7 @@ static struct scsi_host_template cxgb3i_host_template = {
 	.proc_name		= "cxgb3i",
 	.queuecommand		= iscsi_queuecommand,
 	.change_queue_depth	= iscsi_change_queue_depth,
-	.can_queue		= 128 * (ISCSI_DEF_XMIT_CMDS_MAX - 1),
+	.can_queue		= CXGB3I_SCSI_QDEPTH_DFLT - 1,
 	.sg_tablesize		= SG_ALL,
 	.max_sectors		= 0xFFFF,
 	.cmd_per_lun		= ISCSI_DEF_CMD_PER_LUN,

drivers/scsi/cxgb3i/cxgb3i_offload.h

@@ -178,25 +178,33 @@ void cxgb3i_c3cn_release(struct s3_conn *);
  * @flag:	see C3CB_FLAG_* below
  * @ulp_mode:	ULP mode/submode of sk_buff
  * @seq:	tcp sequence number
- * @ddigest:	pdu data digest
- * @pdulen:	recovered pdu length
- * @wr_data:	scratch area for tx wr
  */
+struct cxgb3_skb_rx_cb {
+	__u32 ddigest;			/* data digest */
+	__u32 pdulen;			/* recovered pdu length */
+};
+
+struct cxgb3_skb_tx_cb {
+	struct sk_buff *wr_next;	/* next wr */
+};
+
 struct cxgb3_skb_cb {
 	__u8 flags;
 	__u8 ulp_mode;
 	__u32 seq;
-	__u32 ddigest;
-	__u32 pdulen;
-	struct sk_buff *wr_data;
+	union {
+		struct cxgb3_skb_rx_cb rx;
+		struct cxgb3_skb_tx_cb tx;
+	};
 };
 
 #define CXGB3_SKB_CB(skb)	((struct cxgb3_skb_cb *)&((skb)->cb[0]))
-
+#define skb_flags(skb)		(CXGB3_SKB_CB(skb)->flags)
 #define skb_ulp_mode(skb)	(CXGB3_SKB_CB(skb)->ulp_mode)
-#define skb_ulp_ddigest(skb)	(CXGB3_SKB_CB(skb)->ddigest)
-#define skb_ulp_pdulen(skb)	(CXGB3_SKB_CB(skb)->pdulen)
-#define skb_wr_data(skb)	(CXGB3_SKB_CB(skb)->wr_data)
+#define skb_tcp_seq(skb)	(CXGB3_SKB_CB(skb)->seq)
+#define skb_rx_ddigest(skb)	(CXGB3_SKB_CB(skb)->rx.ddigest)
+#define skb_rx_pdulen(skb)	(CXGB3_SKB_CB(skb)->rx.pdulen)
+#define skb_tx_wr_next(skb)	(CXGB3_SKB_CB(skb)->tx.wr_next)
 
 enum c3cb_flags {
 	C3CB_FLAG_NEED_HDR = 1 << 0,	/* packet needs a TX_DATA_WR header */
@@ -217,6 +225,7 @@ struct sge_opaque_hdr {
 /* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
 #define TX_HEADER_LEN \
 		(sizeof(struct tx_data_wr) + sizeof(struct sge_opaque_hdr))
+#define SKB_TX_HEADROOM		SKB_MAX_HEAD(TX_HEADER_LEN)
 
 /*
  * get and set private ip for iscsi traffic

drivers/scsi/cxgb3i/cxgb3i_pdu.h

@@ -53,7 +53,7 @@ struct cpl_rx_data_ddp_norss {
 #define ULP2_FLAG_DCRC_ERROR		0x20
 #define ULP2_FLAG_PAD_ERROR		0x40
 
-void cxgb3i_conn_closing(struct s3_conn *);
+void cxgb3i_conn_closing(struct s3_conn *c3cn);
 void cxgb3i_conn_pdu_ready(struct s3_conn *c3cn);
 void cxgb3i_conn_tx_open(struct s3_conn *c3cn);
 #endif

drivers/scsi/hptiop.c

@@ -1251,6 +1251,7 @@ static struct pci_device_id hptiop_id_table[] = {
 	{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },

drivers/scsi/scsi_lib.c

@@ -1040,12 +1040,11 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 				action = ACTION_FAIL;
 			break;
 		case ABORTED_COMMAND:
+			action = ACTION_FAIL;
 			if (sshdr.asc == 0x10) { /* DIF */
 				description = "Target Data Integrity Failure";
-				action = ACTION_FAIL;
 				error = -EILSEQ;
-			} else
-				action = ACTION_RETRY;
+			}
 			break;
 		case NOT_READY:
 			/* If the device is in the process of becoming

drivers/scsi/sd.c

@@ -107,6 +107,7 @@ static void scsi_disk_release(struct device *cdev);
 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
 static void sd_print_result(struct scsi_disk *, int);
 
+static DEFINE_SPINLOCK(sd_index_lock);
 static DEFINE_IDA(sd_index_ida);
 
 /* This semaphore is used to mediate the 0->1 reference get in the
@@ -1914,7 +1915,9 @@ static int sd_probe(struct device *dev)
 		if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
 			goto out_put;
 
+		spin_lock(&sd_index_lock);
 		error = ida_get_new(&sd_index_ida, &index);
+		spin_unlock(&sd_index_lock);
 	} while (error == -EAGAIN);
 
 	if (error)
@@ -1936,7 +1939,9 @@ static int sd_probe(struct device *dev)
 	return 0;
 
  out_free_index:
+	spin_lock(&sd_index_lock);
 	ida_remove(&sd_index_ida, index);
+	spin_unlock(&sd_index_lock);
  out_put:
 	put_disk(gd);
  out_free:
@@ -1986,7 +1991,9 @@ static void scsi_disk_release(struct device *dev)
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 	struct gendisk *disk = sdkp->disk;
 	
+	spin_lock(&sd_index_lock);
 	ida_remove(&sd_index_ida, sdkp->index);
+	spin_unlock(&sd_index_lock);
 
 	disk->private_data = NULL;
 	put_disk(disk);