Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fix oops on disconnect in cdc-acm
  USB: storage: include Prolific Technology USB drive in unusual_devs list
  USB: ftdi_sio: add product_id for Marvell OpenRD Base, Client
  USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial converter cable
  USB: EHCI: fix counting of transaction error retries
  USB: EHCI: fix two new bugs related to Clear-TT-Buffer
  USB: usbfs: fix -ENOENT error code to be -ENODEV
  USB: musb: fix the nop registration for OMAP3EVM
  USB: devio: Properly do access_ok() checks
  USB: pl2303: New vendor and product id

arch/arm/configs/omap3_evm_defconfig

@@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_TWL4030_USB is not set
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set

arch/arm/mach-omap2/board-omap3evm.c

@@ -25,6 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -307,6 +308,10 @@ static void __init omap3_evm_init(void)
 				ARRAY_SIZE(omap3evm_spi_board_info));
 
 	omap_serial_init();
+#ifdef CONFIG_NOP_USB_XCEIV
+	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
+	usb_nop_xceiv_register();
+#endif
 	usb_musb_init();
 	ads7846_dev_init();
 }

arch/arm/mach-omap2/usb-musb.c

@@ -155,20 +155,6 @@ static struct platform_device musb_device = {
 	.resource	= musb_resources,
 };
 
-#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
-	.name		= "nop_usb_xceiv",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &nop_xceiv_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= NULL,
-	},
-};
-#endif
-
 void __init usb_musb_init(void)
 {
 	if (cpu_is_omap243x())
@@ -183,13 +169,6 @@ void __init usb_musb_init(void)
 	 */
 	musb_plat.clock = "ick";
 
-#ifdef CONFIG_NOP_USB_XCEIV
-	if (platform_device_register(&nop_xceiv_device) < 0) {
-		printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
-		return;
-	}
-#endif
-
 	if (platform_device_register(&musb_device) < 0) {
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;

drivers/usb/class/cdc-acm.c

@@ -387,7 +387,6 @@ static void acm_rx_tasklet(unsigned long _acm)
 	struct acm_ru *rcv;
 	unsigned long flags;
 	unsigned char throttled;
-	struct usb_host_endpoint *ep;
 
 	dbg("Entering acm_rx_tasklet");
 
@@ -463,14 +462,12 @@ urbs:
 
 		rcv->buffer = buf;
 
-		ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out)
-				[usb_pipeendpoint(acm->rx_endpoint)];
-		if (usb_endpoint_xfer_int(&ep->desc))
+		if (acm->is_int_ep)
 			usb_fill_int_urb(rcv->urb, acm->dev,
 					 acm->rx_endpoint,
 					 buf->base,
 					 acm->readsize,
-					 acm_read_bulk, rcv, ep->desc.bInterval);
+					 acm_read_bulk, rcv, acm->bInterval);
 		else
 			usb_fill_bulk_urb(rcv->urb, acm->dev,
 					  acm->rx_endpoint,
@@ -1183,6 +1180,9 @@ made_compressed_probe:
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
 	acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+	acm->is_int_ep = usb_endpoint_xfer_int(epread);
+	if (acm->is_int_ep)
+		acm->bInterval = epread->bInterval;
 	tty_port_init(&acm->port);
 	acm->port.ops = &acm_port_ops;
 

drivers/usb/class/cdc-acm.h

@@ -126,6 +126,8 @@ struct acm {
 	unsigned int ctrl_caps;				/* control capabilities from the class specific header */
 	unsigned int susp_count;			/* number of suspended interfaces */
 	int combined_interfaces:1;			/* control and data collapsed */
+	int is_int_ep:1;				/* interrupt endpoints contrary to spec used */
+	u8 bInterval;
 	struct acm_wb *delayed_wb;			/* write queued for a device about to be woken */
 };
 

drivers/usb/core/devio.c

@@ -595,7 +595,7 @@ static int usbdev_open(struct inode *inode, struct file *file)
 	if (!ps)
 		goto out;
 
-	ret = -ENOENT;
+	ret = -ENODEV;
 
 	/* usbdev device-node */
 	if (imajor(inode) == USB_DEVICE_MAJOR)
@@ -1321,7 +1321,8 @@ static int get_urb32(struct usbdevfs_urb *kurb,
 		     struct usbdevfs_urb32 __user *uurb)
 {
 	__u32  uptr;
-	if (get_user(kurb->type, &uurb->type) ||
+	if (!access_ok(VERIFY_READ, uurb, sizeof(*uurb)) ||
+	    __get_user(kurb->type, &uurb->type) ||
 	    __get_user(kurb->endpoint, &uurb->endpoint) ||
 	    __get_user(kurb->status, &uurb->status) ||
 	    __get_user(kurb->flags, &uurb->flags) ||
@@ -1536,8 +1537,9 @@ static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg)
 	u32 udata;
 
 	uioc = compat_ptr((long)arg);
-	if (get_user(ctrl.ifno, &uioc->ifno) ||
-	    get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
+	if (!access_ok(VERIFY_READ, uioc, sizeof(*uioc)) ||
+	    __get_user(ctrl.ifno, &uioc->ifno) ||
+	    __get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
 	    __get_user(udata, &uioc->data))
 		return -EFAULT;
 	ctrl.data = compat_ptr(udata);

drivers/usb/host/ehci-hcd.c

@@ -903,7 +903,8 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			/* already started */
 			break;
 		case QH_STATE_IDLE:
-			WARN_ON(1);
+			/* QH might be waiting for a Clear-TT-Buffer */
+			qh_completions(ehci, qh);
 			break;
 		}
 		break;

drivers/usb/host/ehci-q.c

@@ -375,12 +375,11 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 				 */
 				if ((token & QTD_STS_XACT) &&
 						QTD_CERR(token) == 0 &&
-						--qh->xacterrs > 0 &&
+						++qh->xacterrs < QH_XACTERR_MAX &&
 						!urb->unlinked) {
 					ehci_dbg(ehci,
 	"detected XactErr len %zu/%zu retry %d\n",
-	qtd->length - QTD_LENGTH(token), qtd->length,
-	QH_XACTERR_MAX - qh->xacterrs);
+	qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
 
 					/* reset the token in the qtd and the
 					 * qh overlay (which still contains
@@ -494,7 +493,7 @@ halt:
 		last = qtd;
 
 		/* reinit the xacterr counter for the next qtd */
-		qh->xacterrs = QH_XACTERR_MAX;
+		qh->xacterrs = 0;
 	}
 
 	/* last urb's completion might still need calling */
@@ -940,7 +939,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	head->qh_next.qh = qh;
 	head->hw_next = dma;
 
-	qh->xacterrs = QH_XACTERR_MAX;
+	qh_get(qh);
+	qh->xacterrs = 0;
 	qh->qh_state = QH_STATE_LINKED;
 	/* qtd completions reported later by interrupt */
 }
@@ -1080,7 +1080,7 @@ submit_async (
 	 * the HC and TT handle it when the TT has a buffer ready.
 	 */
 	if (likely (qh->qh_state == QH_STATE_IDLE))
-		qh_link_async (ehci, qh_get (qh));
+		qh_link_async(ehci, qh);
  done:
 	spin_unlock_irqrestore (&ehci->lock, flags);
 	if (unlikely (qh == NULL))
@@ -1115,8 +1115,6 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 			&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
 		qh_link_async (ehci, qh);
 	else {
-		qh_put (qh);		// refcount from async list
-
 		/* it's not free to turn the async schedule on/off; leave it
 		 * active but idle for a while once it empties.
 		 */
@@ -1124,6 +1122,7 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 				&& ehci->async->qh_next.qh == NULL)
 			timer_action (ehci, TIMER_ASYNC_OFF);
 	}
+	qh_put(qh);			/* refcount from async list */
 
 	if (next) {
 		ehci->reclaim = NULL;

drivers/usb/host/ehci-sched.c

@@ -542,6 +542,7 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		}
 	}
 	qh->qh_state = QH_STATE_LINKED;
+	qh->xacterrs = 0;
 	qh_get (qh);
 
 	/* update per-qh bandwidth for usbfs */

drivers/usb/musb/Kconfig

@@ -12,6 +12,7 @@ config USB_MUSB_HDRC
 	depends on !SUPERH
 	select NOP_USB_XCEIV if ARCH_DAVINCI
 	select TWL4030_USB if MACH_OMAP_3430SDP
+	select NOP_USB_XCEIV if MACH_OMAP3EVM
 	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help

drivers/usb/serial/ftdi_sio.c

@@ -699,6 +699,9 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
+	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio.h

@@ -953,6 +953,20 @@
 #define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
 #define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
 
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID                      0x1A79
+#define BAYER_CONTOUR_CABLE_PID        0x6001
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID	0x9e90
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ

drivers/usb/serial/pl2303.c

@@ -95,6 +95,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/pl2303.h

@@ -126,3 +126,7 @@
 /* Cressi Edy (diving computer) PC interface */
 #define CRESSI_VENDOR_ID	0x04b8
 #define CRESSI_EDY_PRODUCT_ID	0x0521
+
+/* Sony, USB data cable for CMD-Jxx mobile phones */
+#define SONY_VENDOR_ID		0x054c
+#define SONY_QN3USB_PRODUCT_ID	0x0437

drivers/usb/storage/unusual_devs.h

@@ -838,6 +838,13 @@ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Rogerio Brito <rbrito@ime.usp.br> */
+UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
+		"Prolific Technology, Inc.",
+		"Mass Storage Device",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NOT_LOCKABLE ),
+
 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
 /* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
  * Thomas Bartosik <tbartdev@gmx-topmail.de> */