drm/i915: add FIFO watermark support

This patch from jbarnes and myself adds FIFO watermark control to the
driver.  This is needed for both power saving features on new platforms
with the so-called "big FIFO" and for controlling FIFO allocation
between pipes in multi-head configurations.

It's also necessary infrastructure to support things like framebuffer
compression and configuration supportability checks (i.e. checking a
configuration against available bandwidth).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/i915_dma.c

@@ -1082,6 +1082,44 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
 	master->driver_priv = NULL;
 }
 
+static void i915_get_mem_freq(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 tmp;
+
+	if (!IS_IGD(dev))
+		return;
+
+	tmp = I915_READ(CLKCFG);
+
+	switch (tmp & CLKCFG_FSB_MASK) {
+	case CLKCFG_FSB_533:
+		dev_priv->fsb_freq = 533; /* 133*4 */
+		break;
+	case CLKCFG_FSB_800:
+		dev_priv->fsb_freq = 800; /* 200*4 */
+		break;
+	case CLKCFG_FSB_667:
+		dev_priv->fsb_freq =  667; /* 167*4 */
+		break;
+	case CLKCFG_FSB_400:
+		dev_priv->fsb_freq = 400; /* 100*4 */
+		break;
+	}
+
+	switch (tmp & CLKCFG_MEM_MASK) {
+	case CLKCFG_MEM_533:
+		dev_priv->mem_freq = 533;
+		break;
+	case CLKCFG_MEM_667:
+		dev_priv->mem_freq = 667;
+		break;
+	case CLKCFG_MEM_800:
+		dev_priv->mem_freq = 800;
+		break;
+	}
+}
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
@@ -1165,6 +1203,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 			goto out_iomapfree;
 	}
 
+	i915_get_mem_freq(dev);
+
 	/* On the 945G/GM, the chipset reports the MSI capability on the
 	 * integrated graphics even though the support isn't actually there
 	 * according to the published specs.  It doesn't appear to function

drivers/gpu/drm/i915/i915_drv.h

@@ -225,6 +225,8 @@ typedef struct drm_i915_private {
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
 
+	unsigned int fsb_freq, mem_freq;
+
 	spinlock_t error_lock;
 	struct drm_i915_error_state *first_error;
 
@@ -889,6 +891,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define SUPPORTS_INTEGRATED_DP(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
+/* dsparb controlled by hw only */
+#define DSPARB_HWCONTROL(dev) (IS_G4X(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 

drivers/gpu/drm/i915/i915_irq.c

@@ -376,11 +376,15 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		 * Clear the PIPE(A|B)STAT regs before the IIR
 		 */
 		if (pipea_stats & 0x8000ffff) {
+			if (pipea_stats &  PIPE_FIFO_UNDERRUN_STATUS)
+				DRM_DEBUG("pipe a underrun\n");
 			I915_WRITE(PIPEASTAT, pipea_stats);
 			irq_received = 1;
 		}
 
 		if (pipeb_stats & 0x8000ffff) {
+			if (pipeb_stats &  PIPE_FIFO_UNDERRUN_STATUS)
+				DRM_DEBUG("pipe b underrun\n");
 			I915_WRITE(PIPEBSTAT, pipeb_stats);
 			irq_received = 1;
 		}

drivers/gpu/drm/i915/i915_reg.h

@@ -275,7 +275,13 @@
 #define INSTPM	        0x020c0
 #define ACTHD	        0x020c8
 #define FW_BLC		0x020d8
+#define FW_BLC2	 	0x020dc
 #define FW_BLC_SELF	0x020e0 /* 915+ only */
+#define   FW_BLC_SELF_EN (1<<15)
+#define MM_BURST_LENGTH     0x00700000
+#define MM_FIFO_WATERMARK   0x0001F000
+#define LM_BURST_LENGTH     0x00000700
+#define LM_FIFO_WATERMARK   0x0000001F
 #define MI_ARB_STATE	0x020e4 /* 915+ only */
 #define CACHE_MODE_0	0x02120 /* 915+ only */
 #define   CM0_MASK_SHIFT          16
@@ -585,17 +591,21 @@
 
 /* Clocking configuration register */
 #define CLKCFG			0x10c00
-#define CLKCFG_FSB_400					(0 << 0)	/* hrawclk 100 */
+#define CLKCFG_FSB_400					(5 << 0)	/* hrawclk 100 */
 #define CLKCFG_FSB_533					(1 << 0)	/* hrawclk 133 */
 #define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
 #define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
 #define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
 #define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
-/* this is a guess, could be 5 as well */
+/* Note, below two are guess */
 #define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
-#define CLKCFG_FSB_1600_ALT				(5 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT				(0 << 0)	/* hrawclk 400 */
 #define CLKCFG_FSB_MASK					(7 << 0)
- 
+#define CLKCFG_MEM_533					(1 << 4)
+#define CLKCFG_MEM_667					(2 << 4)
+#define CLKCFG_MEM_800					(3 << 4)
+#define CLKCFG_MEM_MASK					(7 << 4)
+
 /** GM965 GM45 render standby register */
 #define MCHBAR_RENDER_STANDBY	0x111B8
 
@@ -1595,6 +1605,34 @@
 #define   DSPARB_CSTART_SHIFT	7
 #define   DSPARB_BSTART_MASK	(0x7f)
 #define   DSPARB_BSTART_SHIFT	0
+#define   DSPARB_BEND_SHIFT	9 /* on 855 */
+#define   DSPARB_AEND_SHIFT	0
+
+#define DSPFW1			0x70034
+#define DSPFW2			0x70038
+#define DSPFW3			0x7003c
+#define   IGD_SELF_REFRESH_EN	(1<<30)
+
+/* FIFO watermark sizes etc */
+#define I915_FIFO_LINE_SIZE	64
+#define I830_FIFO_LINE_SIZE	32
+#define I945_FIFO_SIZE		127 /* 945 & 965 */
+#define I915_FIFO_SIZE		95
+#define I855GM_FIFO_SIZE	255
+#define I830_FIFO_SIZE		95
+#define I915_MAX_WM		0x3f
+
+#define IGD_DISPLAY_FIFO	512 /* in 64byte unit */
+#define IGD_FIFO_LINE_SIZE	64
+#define IGD_MAX_WM		0x1ff
+#define IGD_DFT_WM		0x3f
+#define IGD_DFT_HPLLOFF_WM	0
+#define IGD_GUARD_WM		10
+#define IGD_CURSOR_FIFO		64
+#define IGD_CURSOR_MAX_WM	0x3f
+#define IGD_CURSOR_DFT_WM	0
+#define IGD_CURSOR_GUARD_WM	5
+
 /*
  * The two pipe frame counter registers are not synchronized, so
  * reading a stable value is somewhat tricky. The following code