powerpc: merge irq.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

arch/powerpc/kernel/Makefile

@@ -11,7 +11,7 @@ CFLAGS_btext.o		+= -fPIC
 endif
 
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
-				   signal_32.o pmc.o
+				   irq.o signal_32.o pmc.o
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
 				   signal_64.o ptrace32.o systbl.o
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o

arch/ppc64/kernel/irq.c → arch/powerpc/kernel/irq.c

@@ -5,8 +5,8 @@
  *    Copyright (C) 1992 Linus Torvalds
  *  Adapted from arch/i386 by Gary Thomas
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Updated and modified by Cort Dougan (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Cort Dougan
+ *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
+ *    Copyright (C) 1996-2001 Cort Dougan
  *  Adapted for Power Macintosh by Paul Mackerras
  *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
  *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
@@ -21,6 +21,14 @@
  * instead of just grabbing them. Thus setups with different IRQ numbers
  * shouldn't result in any weird surprises, and installing new handlers
  * should be easier.
+ *
+ * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
+ * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
+ * mask register (of which only 16 are defined), hence the weird shifting
+ * and complement of the cached_irq_mask.  I want to be able to stuff
+ * this right into the SIU SMASK register.
+ * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
+ * to reduce code space and undefined function references.
  */
 
 #include <linux/errno.h>
@@ -29,6 +37,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/ptrace.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
@@ -40,9 +49,13 @@
 #include <linux/irq.h>
 #include <linux/proc_fs.h>
 #include <linux/random.h>
-#include <linux/kallsyms.h>
+#include <linux/seq_file.h>
+#include <linux/cpumask.h>
 #include <linux/profile.h>
 #include <linux/bitops.h>
+#ifdef CONFIG_PPC64
+#include <linux/kallsyms.h>
+#endif
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -52,35 +65,54 @@
 #include <asm/cache.h>
 #include <asm/prom.h>
 #include <asm/ptrace.h>
-#include <asm/iseries/it_lp_queue.h>
 #include <asm/machdep.h>
+#ifdef CONFIG_PPC64
+#include <asm/iseries/it_lp_queue.h>
 #include <asm/paca.h>
+#endif
 
-#ifdef CONFIG_SMP
-extern void iSeries_smp_message_recv( struct pt_regs * );
+static int ppc_spurious_interrupts;
+
+#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP)
+extern void iSeries_smp_message_recv(struct pt_regs *);
+#endif
+
+#ifdef CONFIG_PPC32
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+
+unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+atomic_t ppc_n_lost_interrupts;
+
+#ifdef CONFIG_TAU_INT
+extern int tau_initialized;
+extern int tau_interrupts(int);
+#endif
+
+#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
+extern atomic_t ipi_recv;
+extern atomic_t ipi_sent;
 #endif
+#endif /* CONFIG_PPC32 */
 
-extern irq_desc_t irq_desc[NR_IRQS];
+#ifdef CONFIG_PPC64
 EXPORT_SYMBOL(irq_desc);
 
 int distribute_irqs = 1;
 int __irq_offset_value;
-int ppc_spurious_interrupts;
 u64 ppc64_interrupt_controller;
+#endif /* CONFIG_PPC64 */
 
 int show_interrupts(struct seq_file *p, void *v)
 {
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
+	int i = *(loff_t *)v, j;
+	struct irqaction *action;
 	irq_desc_t *desc;
 	unsigned long flags;
 
 	if (i == 0) {
-		seq_printf(p, "           ");
-		for (j=0; j<NR_CPUS; j++) {
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ",j);
-		}
+		seq_puts(p, "           ");
+		for_each_online_cpu(j)
+			seq_printf(p, "CPU%d       ", j);
 		seq_putc(p, '\n');
 	}
 
@@ -92,26 +124,41 @@ int show_interrupts(struct seq_file *p, void *v)
 			goto skip;
 		seq_printf(p, "%3d: ", i);
 #ifdef CONFIG_SMP
-		for (j = 0; j < NR_CPUS; j++) {
-			if (cpu_online(j))
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
-		}
 #else
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #endif /* CONFIG_SMP */
 		if (desc->handler)
-			seq_printf(p, " %s ", desc->handler->typename );
+			seq_printf(p, " %s ", desc->handler->typename);
 		else
-			seq_printf(p, "  None      ");
+			seq_puts(p, "  None      ");
 		seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");
-		seq_printf(p, "    %s",action->name);
-		for (action=action->next; action; action = action->next)
+		seq_printf(p, "    %s", action->name);
+		for (action = action->next; action; action = action->next)
 			seq_printf(p, ", %s", action->name);
 		seq_putc(p, '\n');
 skip:
 		spin_unlock_irqrestore(&desc->lock, flags);
-	} else if (i == NR_IRQS)
+	} else if (i == NR_IRQS) {
+#ifdef CONFIG_PPC32
+#ifdef CONFIG_TAU_INT
+		if (tau_initialized){
+			seq_puts(p, "TAU: ");
+			for (j = 0; j < NR_CPUS; j++)
+				if (cpu_online(j))
+					seq_printf(p, "%10u ", tau_interrupts(j));
+			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
+		}
+#endif
+#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
+		/* should this be per processor send/receive? */
+		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
+				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
+#endif
+#endif /* CONFIG_PPC32 */
 		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
+	}
 	return 0;
 }
 
@@ -211,6 +258,13 @@ void do_IRQ(struct pt_regs *regs)
 	}
 #endif
 
+	/*
+	 * Every platform is required to implement ppc_md.get_irq.
+	 * This function will either return an irq number or -1 to
+	 * indicate there are no more pending.
+	 * The value -2 is for buggy hardware and means that this IRQ
+	 * has already been handled. -- Tom
+	 */
 	irq = ppc_md.get_irq(regs);
 
 	if (irq >= 0) {
@@ -229,15 +283,19 @@ void do_IRQ(struct pt_regs *regs)
 #endif
 			__do_IRQ(irq, regs);
 	} else
+#ifdef CONFIG_PPC32
+		if (irq != -2)
+#endif
 			/* That's not SMP safe ... but who cares ? */
 			ppc_spurious_interrupts++;
-
         irq_exit();
 }
+
 #endif	/* CONFIG_PPC_ISERIES */
 
 void __init init_IRQ(void)
 {
+#ifdef CONFIG_PPC64
 	static int once = 0;
 
 	if (once)
@@ -245,10 +303,14 @@ void __init init_IRQ(void)
 
 	once++;
 
+#endif
 	ppc_md.init_IRQ();
+#ifdef CONFIG_PPC64
 	irq_ctx_init();
+#endif
 }
 
+#ifdef CONFIG_PPC64
 #ifndef CONFIG_PPC_ISERIES
 /*
  * Virtual IRQ mapping code, used on systems with XICS interrupt controllers.
@@ -413,3 +475,4 @@ static int __init setup_noirqdistrib(char *str)
 }
 
 __setup("noirqdistrib", setup_noirqdistrib);
+#endif /* CONFIG_PPC64 */

arch/powerpc/platforms/powermac/pic.c

@@ -74,6 +74,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock);
 #define GATWICK_IRQ_POOL_SIZE        10
 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
 
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+
 /*
  * Mark an irq as "lost".  This is only used on the pmac
  * since it can lose interrupts (see pmac_set_irq_mask).

arch/ppc/kernel/Makefile

@@ -12,7 +12,7 @@ extra-$(CONFIG_6xx)		+= idle_6xx.o
 extra-$(CONFIG_POWER4)		+= idle_power4.o
 extra-y				+= vmlinux.lds
 
-obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
+obj-y				:= entry.o traps.o idle.o time.o misc.o \
 					process.o align.o \
 					setup.o \
 					ppc_htab.o
@@ -38,8 +38,7 @@ endif
 # These are here while we do the architecture merge
 
 else
-obj-y				:= irq.o idle.o \
-					align.o
+obj-y				:= idle.o align.o
 obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_MODULES)		+= module.o

arch/ppc/kernel/irq.c

-/*
- *  arch/ppc/kernel/irq.c
- *
- *  Derived from arch/i386/kernel/irq.c
- *    Copyright (C) 1992 Linus Torvalds
- *  Adapted from arch/i386 by Gary Thomas
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
- *    Copyright (C) 1996-2001 Cort Dougan
- *  Adapted for Power Macintosh by Paul Mackerras
- *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- * This file contains the code used by various IRQ handling routines:
- * asking for different IRQ's should be done through these routines
- * instead of just grabbing them. Thus setups with different IRQ numbers
- * shouldn't result in any weird surprises, and installing new handlers
- * should be easier.
- *
- * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
- * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
- * mask register (of which only 16 are defined), hence the weird shifting
- * and complement of the cached_irq_mask.  I want to be able to stuff
- * this right into the SIU SMASK register.
- * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
- * to reduce code space and undefined function references.
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/threads.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/proc_fs.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-#include <linux/cpumask.h>
-#include <linux/profile.h>
-#include <linux/bitops.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/cache.h>
-#include <asm/prom.h>
-#include <asm/ptrace.h>
-#include <asm/machdep.h>
-
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-
-extern atomic_t ipi_recv;
-extern atomic_t ipi_sent;
-
-#define MAXCOUNT 10000000
-
-int ppc_spurious_interrupts = 0;
-struct irqaction *ppc_irq_action[NR_IRQS];
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
-atomic_t ppc_n_lost_interrupts;
-
-#ifdef CONFIG_TAU_INT
-extern int tau_initialized;
-extern int tau_interrupts(int);
-#endif
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
-	unsigned long flags;
-
-	if (i == 0) {
-		seq_puts(p, "           ");
-		for (j=0; j<NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ", j);
-		seq_putc(p, '\n');
-	}
-
-	if (i < NR_IRQS) {
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
-		if ( !action || !action->handler )
-			goto skip;
-		seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ",
-					   kstat_cpu(j).irqs[i]);
-#else
-		seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
-		if (irq_desc[i].handler)
-			seq_printf(p, " %s ", irq_desc[i].handler->typename);
-		else
-			seq_puts(p, "  None      ");
-		seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge  ");
-		seq_printf(p, "    %s", action->name);
-		for (action = action->next; action; action = action->next)
-			seq_printf(p, ", %s", action->name);
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-#ifdef CONFIG_TAU_INT
-		if (tau_initialized){
-			seq_puts(p, "TAU: ");
-			for (j = 0; j < NR_CPUS; j++)
-				if (cpu_online(j))
-					seq_printf(p, "%10u ", tau_interrupts(j));
-			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
-		}
-#endif
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-		/* should this be per processor send/receive? */
-		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
-				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
-#endif
-		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
-	}
-	return 0;
-}
-
-void do_IRQ(struct pt_regs *regs)
-{
-	int irq, first = 1;
-        irq_enter();
-
-	/*
-	 * Every platform is required to implement ppc_md.get_irq.
-	 * This function will either return an irq number or -1 to
-	 * indicate there are no more pending.  But the first time
-	 * through the loop this means there wasn't and IRQ pending.
-	 * The value -2 is for buggy hardware and means that this IRQ
-	 * has already been handled. -- Tom
-	 */
-	while ((irq = ppc_md.get_irq(regs)) >= 0) {
-		__do_IRQ(irq, regs);
-		first = 0;
-	}
-	if (irq != -2 && first)
-		/* That's not SMP safe ... but who cares ? */
-		ppc_spurious_interrupts++;
-        irq_exit();
-}
-
-void __init init_IRQ(void)
-{
-	ppc_md.init_IRQ();
-}

arch/ppc/kernel/ppc_ksyms.c

@@ -78,7 +78,6 @@ EXPORT_SYMBOL(program_check_exception);
 EXPORT_SYMBOL(single_step_exception);
 EXPORT_SYMBOL(sys_sigreturn);
 EXPORT_SYMBOL(ppc_n_lost_interrupts);
-EXPORT_SYMBOL(ppc_lost_interrupts);
 
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);

arch/ppc/platforms/pmac_pic.c

@@ -75,6 +75,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock);
 #define GATWICK_IRQ_POOL_SIZE        10
 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
 
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+
 /*
  * Mark an irq as "lost".  This is only used on the pmac
  * since it can lose interrupts (see pmac_set_irq_mask).

arch/ppc64/kernel/Makefile

@@ -11,7 +11,7 @@ obj-y               :=	misc.o prom.o
 
 endif
 
-obj-y               +=	irq.o idle.o dma.o \
+obj-y               +=	idle.o dma.o \
 			align.o pacaData.o \
 			udbg.o ioctl32.o \
 			rtc.o \

include/asm-powerpc/irq.h

@@ -429,7 +429,6 @@ extern u64 ppc64_interrupt_controller;
 #define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
 /* pedantic: these are long because they are used with set_bit --RR */
 extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
 extern atomic_t ppc_n_lost_interrupts;
 
 #define virt_irq_create_mapping(x)	(x)