Merge git://git.marvell.com/orion into devel

Documentation/DMA-API.txt

@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
 	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 		int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.

Documentation/cpu-freq/user-guide.txt

@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================

Documentation/filesystems/ocfs2.txt

@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-	- extended attributes
 	- quotas
-	- cluster aware flock
-	- cluster aware lockf
 	- Directory change notification (F_NOTIFY)
 	- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 	- POSIX ACLs

Documentation/filesystems/proc.txt

@@ -44,6 +44,7 @@ Table of Contents
   2.14	/proc/<pid>/io - Display the IO accounting fields
   2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
   2.16	/proc/<pid>/mountinfo - Information about mounts
+  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -2483,4 +2484,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+

Documentation/filesystems/ramfs-rootfs-initramfs.txt

@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1

Documentation/input/input-programming.txt

@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1072,10 +1072,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  ref		Reference board
 	  dell-m4-1	Dell desktops
 	  dell-m4-2	Dell desktops
+	  dell-m4-3	Dell desktops
 
 	STAC92HD73*
 	  ref		Reference board
-	  dell-m6	Dell desktops
+	  dell-m6-amic	Dell desktops/laptops with analog mics
+	  dell-m6-dmic	Dell desktops/laptops with digital mics
+	  dell-m6	Dell desktops/laptops with both type of mics
 
 	STAC9872
 	  vaio		Setup for VAIO FE550G/SZ110

Documentation/spi/spi-summary

@@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
 	 */
-	static struct mysoc_spi_data __init pdata = { ... };
+	static struct mysoc_spi_data __initdata pdata = { ... };
 
 	static __init board_init(void)
 	{

Documentation/tracers/mmiotrace.txt

@@ -37,7 +37,7 @@ $ echo mmiotrace > /debug/tracing/current_tracer
 $ cat /debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
 $ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 Check for lost events.
 
 
@@ -66,7 +66,7 @@ which action. It is recommended to place descriptive markers about what you
 do.
 
 Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
 pressing ctrl+c.
 
@@ -81,7 +81,9 @@ are:
 $ cat /debug/tracing/trace_entries
 gives you a number. Approximately double this number and write it back, for
 instance:
+$ echo 0 > /debug/tracing/tracing_enabled
 $ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc6
-NAME = Killer Bat of Doom
+EXTRAVERSION = -rc7
+NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/Kconfig

@@ -79,8 +79,6 @@ config HAVE_KRETPROBES
 #	task_pt_regs()		in asm/processor.h or asm/ptrace.h
 #	arch_has_single_step()	if there is hardware single-step support
 #	arch_has_block_step()	if there is hardware block-step support
-#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
-#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h

arch/alpha/kernel/pci.c

@@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp)
 	return PCI_SLOT(dev->devfn);
 }
 
-void __devinit
+void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {

arch/alpha/kernel/smp.c

@@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __init
+void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __init
+static void __cpuinit
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -289,7 +289,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __init
+static int __cpuinit
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;

arch/alpha/kernel/traps.c

@@ -31,7 +31,7 @@
 
 static int opDEC_fix;
 
-static void __init
+static void __cpuinit
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@ give_sigbus:
 	return;
 }
 
-void __init
+void __cpuinit
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

arch/arm/Makefile

@@ -76,6 +76,7 @@ tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
 tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
 tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)

arch/arm/configs/corgi_defconfig

@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set

arch/arm/mach-kirkwood/common.c

@@ -57,6 +57,7 @@ void __init kirkwood_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data kirkwood_ehci_data = {
 	.dram		= &kirkwood_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;
@@ -152,6 +153,64 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 }
 
 
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data kirkwood_ge01_shared_data = {
+	.dram		= &kirkwood_mbus_dram_info,
+	.shared_smi	= &kirkwood_ge00_shared,
+};
+
+static struct resource kirkwood_ge01_shared_resources[] = {
+	{
+		.name	= "ge01 base",
+		.start	= GE01_PHYS_BASE + 0x2000,
+		.end	= GE01_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "ge01 err irq",
+		.start	= IRQ_KIRKWOOD_GE01_ERR,
+		.end	= IRQ_KIRKWOOD_GE01_ERR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_ge01_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &kirkwood_ge01_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_ge01_shared_resources),
+	.resource	= kirkwood_ge01_shared_resources,
+};
+
+static struct resource kirkwood_ge01_resources[] = {
+	{
+		.name	= "ge01 irq",
+		.start	= IRQ_KIRKWOOD_GE01_SUM,
+		.end	= IRQ_KIRKWOOD_GE01_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_ge01 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= kirkwood_ge01_resources,
+};
+
+void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &kirkwood_ge01_shared;
+	kirkwood_ge01.dev.platform_data = eth_data;
+
+	platform_device_register(&kirkwood_ge01_shared);
+	platform_device_register(&kirkwood_ge01);
+}
+
+
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/

arch/arm/mach-kirkwood/common.h

@@ -30,6 +30,7 @@ void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
 void kirkwood_ehci_init(void);
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);

arch/arm/mach-kirkwood/include/mach/irqs.h

@@ -51,6 +51,7 @@
 #define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
 #define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
 #define IRQ_KIRKWOOD_GE00_ERR	46
+#define IRQ_KIRKWOOD_GE01_ERR	47
 
 /*
  * KIRKWOOD General Purpose Pins

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -80,24 +80,38 @@ static struct dsa_platform_data rd88f6281_switch_data = {
 	.port_names[1]	= "lan2",
 	.port_names[2]	= "lan3",
 	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
 	.port_names[5]	= "cpu",
 };
 
+static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
 static struct mv_sata_platform_data rd88f6281_sata_data = {
 	.n_ports	= 2,
 };
 
 static void __init rd88f6281_init(void)
 {
+	u32 dev, rev;
+
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
 
 	kirkwood_ehci_init();
+
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
+	kirkwood_pcie_id(&dev, &rev);
+	if (rev == MV88F6281_REV_A0) {
+		rd88f6281_switch_data.sw_addr = 10;
+		kirkwood_ge01_init(&rd88f6281_ge01_data);
+	} else {
+		rd88f6281_switch_data.port_names[4] = "wan";
+	}
 	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
+
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_uart0_init();

arch/arm/mach-mv78xx0/common.c

@@ -167,6 +167,7 @@ void __init mv78xx0_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data mv78xx0_ehci_data = {
 	.dram		= &mv78xx0_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;

arch/arm/mach-orion5x/common.c

@@ -72,6 +72,7 @@ void __init orion5x_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data orion5x_ehci_data = {
 	.dram		= &orion5x_mbus_dram_info,
+	.phy_version	= EHCI_PHY_ORION,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;

arch/arm/mach-orion5x/dns323-setup.c

@@ -21,6 +21,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -64,9 +65,21 @@ static struct hw_pci dns323_pci __initdata = {
 	.map_irq	= dns323_pci_map_irq,
 };
 
+static int __init dns323_dev_id(void)
+{
+	u32 dev, rev;
+
+	orion5x_pcie_id(&dev, &rev);
+
+	return dev;
+}
+
 static int __init dns323_pci_init(void)
 {
-	if (machine_is_dns323())
+	/* The 5182 doesn't really use it's PCI bus, and initialising PCI
+	 * gets in the way of initialising the SATA controller.
+	 */
+	if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
 		pci_common_init(&dns323_pci);
 
 	return 0;
@@ -74,14 +87,6 @@ static int __init dns323_pci_init(void)
 
 subsys_initcall(dns323_pci_init);
 
-/****************************************************************************
- * Ethernet
- */
-
-static struct mv643xx_eth_platform_data dns323_eth_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
 /****************************************************************************
  * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
  *
@@ -142,6 +147,90 @@ static struct platform_device dns323_nor_flash = {
 	.num_resources	= 1,
 };
 
+/****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = dns323_parse_hex_nibble(b[0]);
+	lo = dns323_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init dns323_read_mac_addr(void)
+{
+	u_int8_t addr[6];
+	int i;
+	char *mac_page;
+
+	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
+	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
+	 */
+	mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
+	if (!mac_page)
+		return -ENOMEM;
+
+	/* Sanity check the string we're looking at */
+	for (i = 0; i < 5; i++) {
+		if (*(mac_page + (i * 3) + 2) != ':') {
+			goto error_fail;
+		}
+	}
+
+	for (i = 0; i < 6; i++)	{
+		int byte;
+
+		byte = dns323_parse_hex_byte(mac_page + (i * 3));
+		if (byte < 0) {
+			goto error_fail;
+		}
+
+		addr[i] = byte;
+	}
+
+	iounmap(mac_page);
+	printk("DNS323: Found ethernet MAC address: ");
+	for (i = 0; i < 6; i++)
+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+	memcpy(dns323_eth_data.mac_addr, addr, 6);
+
+	return 0;
+
+error_fail:
+	iounmap(mac_page);
+	return -EINVAL;
+}
+
 /****************************************************************************
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
@@ -207,10 +296,17 @@ static struct platform_device dns323_button_device = {
 	},
 };
 
+/*****************************************************************************
+ * SATA
+ */
+static struct mv_sata_platform_data dns323_sata_data = {
+       .n_ports        = 2,
+};
+
 /****************************************************************************
  * General Setup
  */
-static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
 	{  0, MPP_PCIE_RST_OUTn },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -234,6 +330,30 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
+static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED },
+	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
+	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
+	{  3, MPP_UNUSED },
+	{  4, MPP_GPIO },		/* power button LED */
+	{  5, MPP_GPIO },		/* power button LED */
+	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
+	{  7, MPP_GPIO },		/* M41T80 nIRQ/OUT/SQW */
+	{  8, MPP_GPIO },		/* triggers power off */
+	{  9, MPP_GPIO },		/* power button switch */
+	{ 10, MPP_GPIO },		/* reset button switch */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },
+	{ 13, MPP_SATA_LED },
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
 /*
  * On the DNS-323 the following devices are attached via I2C:
  *
@@ -264,16 +384,15 @@ static void __init dns323_init(void)
 	/* Setup basic Orion functions. Need to be called early. */
 	orion5x_init();
 
-	orion5x_mpp_conf(dns323_mpp_modes);
-	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-
-	/*
-	 * Configure peripherals.
+	/* Just to be tricky, the 5182 has a completely different
+	 * set of MPP modes to the 5181.
 	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&dns323_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		orion5x_mpp_conf(dns323_mv88f5182_mpp_modes);
+	else {
+		orion5x_mpp_conf(dns323_mv88f5181_mpp_modes);
+		writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+	}
 
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
@@ -288,6 +407,23 @@ static void __init dns323_init(void)
 	i2c_register_board_info(0, dns323_i2c_devices,
 				ARRAY_SIZE(dns323_i2c_devices));
 
+	/*
+	 * Configure peripherals.
+	 */
+	if (dns323_read_mac_addr() < 0)
+		printk("DNS323: Failed to read MAC address\n");
+
+	orion5x_ehci0_init();
+	orion5x_eth_init(&dns323_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	/* The 5182 has it's SATA controller on-chip, and needs it's own little
+	 * init routine.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		orion5x_sata_init(&dns323_sata_data);
+
 	/* register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)

arch/arm/mach-pxa/palmtx.c

@@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO115_GPIO,	/* SD r/o switch */
 
 	/* AC97 */
 	GPIO28_AC97_BITCLK,
@@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 
 	/* IrDA */
+	GPIO40_GPIO,	/* ir disable */
 	GPIO46_FICP_RXD,
 	GPIO47_FICP_TXD,
 
@@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO16_PWM0_OUT,
 
 	/* USB */
-	GPIO13_GPIO,
+	GPIO13_GPIO,	/* usb detect */
+	GPIO95_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
+	GPIO94_GPIO,	/* wifi power 1 */
+	GPIO108_GPIO,	/* wifi power 2 */
+	GPIO116_GPIO,	/* wifi ready */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MISC. */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO12_GPIO,	/* power detect */
+	GPIO107_GPIO,	/* earphone detect */
 };
 
 /******************************************************************************
@@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
 	int err = 0;
 
 	/* Setup an interrupt for detecting card insert/remove events */
-	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
-			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"SD/MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
 				__func__);
-		return err;
+		goto err2;
 	}
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
 	if (err)
-		goto pwr_err;
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+	if (err)
+		goto err4;
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
 	if (err)
-		goto ro_err;
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+	if (err)
+		goto err5;
 
 	printk(KERN_DEBUG "%s: irq registered\n", __func__);
 
 	return 0;
 
-ro_err:
+err5:
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
 	return err;
 }
 
@@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
 }
 
 static void palmtx_mci_power(struct device *dev, unsigned int vdd)
@@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = {
 
 	KEY(3, 0, KEY_RIGHT),
 	KEY(3, 2, KEY_LEFT),
-
 };
 
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
@@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev)
 	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
 	if (ret)
 		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+	if (ret)
+		goto err2;
 	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
 	if (ret)
 		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+	if (ret)
+		goto err3;
 
 	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
 err2:
 	gpio_free(GPIO_NR_PALMTX_BL_POWER);
 err:
@@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
 static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
@@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.startup		= palmtx_irda_startup,
+	.shutdown		= palmtx_irda_shutdown,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= palmtx_irda_transceiver_mode,
 };
@@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
-	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
-	udelay(50);
-	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.udc_command		= palmtx_udc_command,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup_inverted	= 0,
 };
 
 /******************************************************************************
@@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev)
 
 	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
 	if (ret)
-		goto err_cs_ac;
-
-	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
 	if (ret)
-		goto err_cs_usb;
+		goto err2;
 
 	return 0;
 
-err_cs_usb:
+err2:
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
 	return ret;
 }
 
@@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void)
 	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
-static int palmtx_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
 static void power_supply_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
@@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = {
 static struct pda_power_pdata power_supply_info = {
 	.init            = power_supply_init,
 	.is_ac_online    = palmtx_is_ac_online,
-	.is_usb_online   = palmtx_is_usb_online,
 	.exit            = power_supply_exit,
 	.supplied_to     = palmtx_supplicants,
 	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
@@ -410,12 +485,23 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	}
+}
+
+
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
+	palmtx_udc_init();
 	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -389,6 +389,7 @@ static struct soc_camera_link iclink[] = {
 		.gpio	= NR_BUILTIN_GPIO + 1,
 	}, {
 		.bus_id	= 0, /* Must match with the camera ID above */
+		.gpio	= -ENXIO,
 	}
 };
 

arch/arm/mach-s3c2410/include/mach/spi-gpio.h

@@ -18,6 +18,7 @@ struct s3c2410_spigpio_info {
 	unsigned long		 pin_mosi;
 	unsigned long		 pin_miso;
 
+	int			 num_chipselect;
 	int			 bus_num;
 
 	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);

arch/arm/plat-orion/include/plat/ehci-orion.h

@@ -11,8 +11,16 @@
 
 #include <linux/mbus.h>
 
+enum orion_ehci_phy_ver {
+	EHCI_PHY_ORION,
+	EHCI_PHY_DD,
+	EHCI_PHY_KW,
+	EHCI_PHY_NA,
+};
+
 struct orion_ehci_data {
 	struct mbus_dram_target_info	*dram;
+	enum orion_ehci_phy_ver phy_version;
 };
 
 

arch/frv/kernel/sys_frv.c

@@ -35,22 +35,21 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	int error = -EBADF;
 	struct file * file = NULL;
 
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
 	/* As with sparc32, make sure the shift for mmap2 is constant
 	   (12), no matter what PAGE_SIZE we have.... */
 
 	/* But unlike sparc32, don't just silently break if we're
 	   trying to map something we can't */
-	if (pgoff & ((1<<(PAGE_SHIFT-12))-1))
+	if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
 		return -EINVAL;
+	pgoff >>= PAGE_SHIFT - 12;
 
-	pgoff >>= (PAGE_SHIFT - 12);
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			goto out;
+	}
 
 	down_write(&current->mm->mmap_sem);
 	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);

arch/ia64/include/asm/ptrace.h

@@ -325,8 +325,6 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
   #define arch_has_block_step()   (1)
   extern void user_enable_block_step(struct task_struct *);
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 #endif /* !__KERNEL__ */
 
 /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */

arch/ia64/sn/kernel/io_init.c

@@ -292,7 +292,7 @@ EXPORT_SYMBOL(sn_io_slot_fixup);
  * sn_pci_controller_fixup() - This routine sets up a bus's resources
  *			       consistent with the Linux PCI abstraction layer.
  */
-static void
+static void __init
 sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 {
 	s64 status = 0;

arch/m32r/kernel/head.S

@@ -23,7 +23,7 @@ __INITDATA
 /*
  * References to members of the boot_cpu_data structure.
  */
-	.text
+.section .text.head, "ax"
 	.global	start_kernel
 	.global __bss_start
 	.global _end
@@ -133,7 +133,6 @@ loop1:
 /*
  * AP startup routine
  */
-	.text
 	.global	eit_vector
 ENTRY(startup_AP)
 ;; setup EVB
@@ -230,6 +229,7 @@ ENTRY(startup_AP)
 	nop
 #endif  /* CONFIG_SMP */
 
+	.text
 ENTRY(stack_start)
 	.long	init_thread_union+8192
 	.long	__KERNEL_DS

arch/m32r/kernel/vmlinux.lds.S

@@ -27,6 +27,7 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .boot : { *(.boot) } = 0
   .text : {
+	*(.text.head)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT

arch/mips/include/asm/bug.h

@@ -7,20 +7,31 @@
 
 #include <asm/break.h>
 
-#define BUG()								\
-do {									\
-	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));		\
-} while (0)
+static inline void __noreturn BUG(void)
+{
+	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+	/* Fool GCC into thinking the function doesn't return. */
+	while (1)
+		;
+}
 
 #define HAVE_ARCH_BUG
 
 #if (_MIPS_ISA > _MIPS_ISA_MIPS1)
 
-#define BUG_ON(condition)						\
-do {									\
-	__asm__ __volatile__("tne $0, %0, %1"				\
-			     : : "r" (condition), "i" (BRK_BUG));	\
-} while (0)
+static inline void  __BUG_ON(unsigned long condition)
+{
+	if (__builtin_constant_p(condition)) {
+		if (condition)
+			BUG();
+		else
+			return;
+	}
+	__asm__ __volatile__("tne $0, %0, %1"
+			     : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
 
 #define HAVE_ARCH_BUG_ON
 

arch/mips/include/asm/ptrace.h

@@ -9,10 +9,6 @@
 #ifndef _ASM_PTRACE_H
 #define _ASM_PTRACE_H
 
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
 /* 0 - 31 are integer registers, 32 - 63 are fp registers.  */
 #define FPR_BASE	32
 #define PC		64

arch/mn10300/kernel/gdb-stub.c

@@ -522,17 +522,7 @@ static int gdbstub_single_step(struct pt_regs *regs)
 	} else {
 		switch (cur) {
 			/* Bxx (d8,PC) */
-		case 0xc0:
-		case 0xc1:
-		case 0xc2:
-		case 0xc3:
-		case 0xc4:
-		case 0xc5:
-		case 0xc6:
-		case 0xc7:
-		case 0xc8:
-		case 0xc9:
-		case 0xca:
+		case 0xc0 ... 0xca:
 			if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
 				goto fault;
 			if (!__gdbstub_mark_bp(pc + 2, 0))
@@ -543,17 +533,7 @@ static int gdbstub_single_step(struct pt_regs *regs)
 			break;
 
 			/* LXX (d8,PC) */
-		case 0xd0:
-		case 0xd1:
-		case 0xd2:
-		case 0xd3:
-		case 0xd4:
-		case 0xd5:
-		case 0xd6:
-		case 0xd7:
-		case 0xd8:
-		case 0xd9:
-		case 0xda:
+		case 0xd0 ... 0xda:
 			if (!__gdbstub_mark_bp(pc + 1, 0))
 				goto fault;
 			if (regs->pc != regs->lar &&

arch/parisc/include/asm/parisc-device.h

@@ -42,9 +42,9 @@ struct parisc_driver {
 #define to_parisc_driver(d)	container_of(d, struct parisc_driver, drv)
 #define parisc_parent(d)	to_parisc_device(d->dev.parent)
 
-static inline char *parisc_pathname(struct parisc_device *d)
+static inline const char *parisc_pathname(struct parisc_device *d)
 {
-	return d->dev.bus_id;
+	return dev_name(&d->dev);
 }
 
 static inline void

arch/parisc/include/asm/posix_types.h

@@ -24,13 +24,12 @@ typedef int			__kernel_daddr_t;
 typedef unsigned long		__kernel_size_t;
 typedef long			__kernel_ssize_t;
 typedef long			__kernel_ptrdiff_t;
-typedef long			__kernel_time_t;
 #else
 typedef unsigned int		__kernel_size_t;
 typedef int			__kernel_ssize_t;
 typedef int			__kernel_ptrdiff_t;
-typedef long			__kernel_time_t;
 #endif
+typedef long			__kernel_time_t;
 typedef char *			__kernel_caddr_t;
 
 typedef unsigned short		__kernel_uid16_t;

arch/parisc/include/asm/ptrace.h

@@ -47,8 +47,6 @@ struct pt_regs {
 
 #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 struct task_struct;
 #define arch_has_single_step()	1
 void user_disable_single_step(struct task_struct *task);

arch/parisc/kernel/drivers.c

@@ -43,7 +43,7 @@ struct hppa_dma_ops *hppa_dma_ops __read_mostly;
 EXPORT_SYMBOL(hppa_dma_ops);
 
 static struct device root = {
-	.bus_id = "parisc",
+	.init_name = "parisc",
 };
 
 static inline int check_dev(struct device *dev)
@@ -393,7 +393,8 @@ EXPORT_SYMBOL(print_pci_hwpath);
 static void setup_bus_id(struct parisc_device *padev)
 {
 	struct hardware_path path;
-	char *output = padev->dev.bus_id;
+	char name[20];
+	char *output = name;
 	int i;
 
 	get_node_path(padev->dev.parent, &path);
@@ -404,6 +405,7 @@ static void setup_bus_id(struct parisc_device *padev)
 		output += sprintf(output, "%u:", (unsigned char) path.bc[i]);
 	}
 	sprintf(output, "%u", (unsigned char) padev->hw_path);
+	dev_set_name(&padev->dev, name);
 }
 
 struct parisc_device * create_tree_node(char id, struct device *parent)

arch/parisc/kernel/traps.c

@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/console.h>
-#include <linux/kallsyms.h>
 #include <linux/bug.h>
 
 #include <asm/assembly.h>
@@ -51,7 +50,7 @@
 DEFINE_SPINLOCK(pa_dbit_lock);
 #endif
 
-void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
 	struct pt_regs *regs);
 
 static int printbinary(char *buf, unsigned long x, int nbits)
@@ -121,18 +120,19 @@ static void print_fr(char *level, struct pt_regs *regs)
 
 void show_regs(struct pt_regs *regs)
 {
-	int i;
+	int i, user;
 	char *level;
 	unsigned long cr30, cr31;
 
-	level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
+	user = user_mode(regs);
+	level = user ? KERN_DEBUG : KERN_CRIT;
 
 	print_gr(level, regs);
 
 	for (i = 0; i < 8; i += 4)
 		PRINTREGS(level, regs->sr, "sr", RFMT, i);
 
-	if (user_mode(regs))
+	if (user)
 		print_fr(level, regs);
 
 	cr30 = mfctl(30);
@@ -145,14 +145,18 @@ void show_regs(struct pt_regs *regs)
 	printk("%s CPU: %8d   CR30: " RFMT " CR31: " RFMT "\n",
 	       level, current_thread_info()->cpu, cr30, cr31);
 	printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
-	printk(level);
-	print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]);
-	printk(level);
-	print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
-	printk(level);
-	print_symbol(" RP(r2): %s\n", regs->gr[2]);
-
-	parisc_show_stack(current, NULL, regs);
+
+	if (user) {
+		printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
+		printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
+		printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
+	} else {
+		printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
+		printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
+		printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
+
+		parisc_show_stack(current, NULL, regs);
+	}
 }
 
 
@@ -173,20 +177,15 @@ static void do_show_stack(struct unwind_frame_info *info)
 			break;
 
 		if (__kernel_text_address(info->ip)) {
-			printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
-#ifdef CONFIG_KALLSYMS
-			print_symbol("%s\n", info->ip);
-#else
-			if ((i & 0x03) == 0)
-				printk("\n");
-#endif
+			printk(KERN_CRIT " [<" RFMT ">] %pS\n",
+				info->ip, (void *) info->ip);
 			i++;
 		}
 	}
-	printk("\n");
+	printk(KERN_CRIT "\n");
 }
 
-void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
 	struct pt_regs *regs)
 {
 	struct unwind_frame_info info;

arch/powerpc/boot/dts/mpc832x_rdb.dts

@@ -18,8 +18,8 @@
 	#size-cells = <1>;
 
 	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
+		ethernet0 = &enet1;
+		ethernet1 = &enet0;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;

arch/powerpc/boot/dts/mpc8572ds.dts

@@ -90,7 +90,7 @@
 			compatible = "fsl,mpc8572-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
+			cache-size = <0x100000>; // L2, 1M
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 		};

arch/powerpc/configs/86xx/gef_sbc610_defconfig

@@ -838,7 +838,7 @@ CONFIG_PHYLIB=y
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set

arch/powerpc/include/asm/mmu-hash64.h

@@ -280,7 +280,6 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
-extern void set_huge_psize(int psize);
 extern void add_gpage(unsigned long addr, unsigned long page_size,
 			  unsigned long number_of_pages);
 extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);

arch/powerpc/include/asm/ptrace.h

@@ -55,8 +55,6 @@ struct pt_regs {
 
 #ifdef __powerpc64__
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 #define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
 #define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
 #define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)

arch/powerpc/kernel/cpu_setup_44x.S

@@ -34,7 +34,12 @@ _GLOBAL(__setup_cpu_440grx)
 	blr
 _GLOBAL(__setup_cpu_460ex)
 _GLOBAL(__setup_cpu_460gt)
-	b	__init_fpu_44x
+	mflr	r4
+	bl	__init_fpu_44x
+	bl	__fixup_440A_mcheck
+	mtlr	r4
+	blr
+
 _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
 	b	__fixup_440A_mcheck

arch/powerpc/kernel/entry_64.S

@@ -57,12 +57,18 @@ system_call_common:
 	beq-	1f
 	ld	r1,PACAKSAVE(r13)
 1:	std	r10,0(r1)
-	crclr	so
 	std	r11,_NIP(r1)
 	std	r12,_MSR(r1)
 	std	r0,GPR0(r1)
 	std	r10,GPR1(r1)
 	ACCOUNT_CPU_USER_ENTRY(r10, r11)
+	/*
+	 * This "crclr so" clears CR0.SO, which is the error indication on
+	 * return from this system call.  There must be no cmp instruction
+	 * between it and the "mfcr r9" below, otherwise if XER.SO is set,
+	 * CR0.SO will get set, causing all system calls to appear to fail.
+	 */
+	crclr	so
 	std	r2,GPR2(r1)
 	std	r3,GPR3(r1)
 	std	r4,GPR4(r1)

arch/powerpc/kernel/prom_parse.c

@@ -250,8 +250,11 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 	 * parsing
 	 */
 	dn = pci_device_to_OF_node(pdev);
-	if (dn)
-		return of_irq_map_one(dn, 0, out_irq);
+	if (dn) {
+		rc = of_irq_map_one(dn, 0, out_irq);
+		if (!rc)
+			return rc;
+	}
 
 	/* Ok, we don't, time to have fun. Let's start by building up an
 	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard