Merge branch 'davinci-mtd' into davinci-reset

drivers/mtd/mtdpart.c

@@ -26,6 +26,7 @@ static LIST_HEAD(mtd_partitions);
 struct mtd_part {
 	struct mtd_info mtd;
 	struct mtd_info *master;
+	struct memory_accessor macc;
 	uint64_t offset;
 	struct list_head list;
 };
@@ -327,6 +328,39 @@ int del_mtd_partitions(struct mtd_info *master)
 }
 EXPORT_SYMBOL(del_mtd_partitions);
 
+/*
+ * This lets other kernel code access the flash data. For example, it
+ * might hold a board's Ethernet address, or board-specific calibration
+ * data generated on the manufacturing floor.
+ */
+static ssize_t mtd_macc_read(struct memory_accessor *macc, char *buf,
+			off_t offset, size_t count)
+{
+	struct mtd_part *part = container_of(macc, struct mtd_part, macc);
+	ssize_t ret = -EIO;
+	size_t retlen;
+
+	if (part_read((struct mtd_info *)part, offset, count,
+			&retlen, buf) == 0)
+		ret = retlen;
+
+	return ret;
+}
+
+static ssize_t mtd_macc_write(struct memory_accessor *macc, const char *buf,
+			off_t offset, size_t count)
+{
+	struct mtd_part *part = container_of(macc, struct mtd_part, macc);
+	ssize_t ret = -EIO;
+	size_t retlen;
+
+	if (part_write((struct mtd_info *)part, offset, count,
+			&retlen, buf) == 0)
+		ret = retlen;
+
+	return ret;
+}
+
 static struct mtd_part *add_one_partition(struct mtd_info *master,
 		const struct mtd_partition *part, int partno,
 		uint64_t cur_offset)
@@ -364,6 +398,9 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	slave->mtd.read = part_read;
 	slave->mtd.write = part_write;
 
+	slave->macc.read = mtd_macc_read;
+	slave->macc.write = mtd_macc_write;
+
 	if (master->panic_write)
 		slave->mtd.panic_write = part_panic_write;
 
@@ -428,6 +465,9 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset,
 		(unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name);
 
+	if (part->setup)
+		part->setup(&slave->macc, (void *)part->context);
+
 	/* let's do some sanity checks */
 	if (slave->offset >= master->size) {
 		/* let's register it anyway to preserve ordering */

drivers/mtd/nand/davinci_nand.c

@@ -311,7 +311,9 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd,
 	unsigned short ecc10[8];
 	unsigned short *ecc16;
 	u32 syndrome[4];
+	u32 ecc_state;
 	unsigned num_errors, corrected;
+	unsigned long timeo = jiffies + msecs_to_jiffies(100);
 
 	/* All bytes 0xff?  It's an erased page; ignore its ECC. */
 	for (i = 0; i < 10; i++) {
@@ -361,6 +363,21 @@ compare:
 	 */
 	davinci_nand_writel(info, NANDFCR_OFFSET,
 			davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+
+	/*
+	 * ECC_STATE field reads 0x3 (Error correction complete) immediately
+	 * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
+	 * begin trying to poll for the state, you may fall right out of your
+	 * loop without any of the correction calculations having taken place.
+	 * The recommendation from the hardware team is to wait till ECC_STATE
+	 * reads less than 4, which means ECC HW has entered correction state.
+	 */
+	do {
+		ecc_state = (davinci_nand_readl(info,
+				NANDFSR_OFFSET) >> 8) & 0x0f;
+		cpu_relax();
+	} while ((ecc_state < 4) && time_before(jiffies, timeo));
+
 	for (;;) {
 		u32	fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
 

include/linux/mtd/partitions.h

@@ -10,6 +10,7 @@
 #define MTD_PARTITIONS_H
 
 #include <linux/types.h>
+#include <linux/memory.h>
 
 
 /*
@@ -40,6 +41,8 @@ struct mtd_partition {
 	uint64_t offset;		/* offset within the master MTD space */
 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
+	void (*setup)(struct memory_accessor *, void *context);
+	void *context;
 };
 
 #define MTDPART_OFS_NXTBLK	(-2)