Commit 72144268 authored by David Brownell's avatar David Brownell Committed by Tony Lindgren

ARM: OMAP: omap2/gpmc updates

GPMC updates:
 - bugfixes: wrong/missing flags, omitted write, wrong test
 - don't map memory segments starting at zero
 - improve debug messaging
 - export gpmc_get_fclk_perio]d() since it's needed to calc timings
 - expect gpmc_cs_set_timings() caller to have initialized sync vs async

Note that this API is glitchy; likely the best fix would be to add
a member to "struct gpmc_timings" to hold GPMC_CONFIG1, since that
holds one key aspect of the GPMC timings (the gpmc_fclk divisor,
and sync vs. async == whether that divisor matters).
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 8d311403
......@@ -87,7 +87,7 @@ u32 gpmc_cs_read_reg(int cs, int idx)
}
/* TODO: Add support for gpmc_fck to clock framework and use it */
static unsigned long gpmc_get_fclk_period(void)
unsigned long gpmc_get_fclk_period(void)
{
/* In picoseconds */
return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
......@@ -119,15 +119,21 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
else
ticks = gpmc_ns_to_ticks(time);
nr_bits = end_bit - st_bit + 1;
if (ticks >= 1 << nr_bits)
if (ticks >= 1 << nr_bits) {
#ifdef DEBUG
printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n",
cs, name, time, ticks, 1 << nr_bits);
#endif
return -1;
}
mask = (1 << nr_bits) - 1;
l = gpmc_cs_read_reg(cs, reg);
#ifdef DEBUG
printk(KERN_INFO "GPMC CS%d: %-10s: %d ticks, %3lu ns (was %i ticks)\n",
printk(KERN_INFO
"GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
(l >> st_bit) & mask);
(l >> st_bit) & mask, time);
#endif
l &= ~(mask << st_bit);
l |= ticks << st_bit;
......@@ -156,7 +162,7 @@ int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
div = l / gpmc_get_fclk_period();
if (div > 4)
return -1;
if (div < 0)
if (div <= 0)
div = 1;
return div;
......@@ -190,14 +196,19 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
/* caller is expected to have initialized CONFIG1 to cover
* at least sync vs async
*/
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) {
#ifdef DEBUG
printk(KERN_INFO "GPMC CS%d CLK period is %lu (div %d)\n",
cs, gpmc_get_fclk_period(), div);
printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n",
cs, (div * gpmc_get_fclk_period()) / 1000, div);
#endif
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
l &= ~0x03;
l |= (div - 1);
l &= ~0x03;
l |= (div - 1);
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
}
return 0;
}
......@@ -338,19 +349,10 @@ void __init gpmc_mem_init(void)
int cs;
unsigned long boot_rom_space = 0;
if (cpu_is_omap242x()) {
u32 l;
l = omap_readl(OMAP242X_CONTROL_STATUS);
/* In case of internal boot the 1st MB is redirected to the
* boot ROM memory space.
*/
if (l & (1 << 3))
boot_rom_space = BOOT_ROM_SPACE;
} else
/* We assume internal boot if the mode can't be
* determined.
*/
boot_rom_space = BOOT_ROM_SPACE;
/* never allocate the first page, to facilitate bug detection;
* even if we didn't boot from ROM.
*/
boot_rom_space = BOOT_ROM_SPACE;
gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
gpmc_mem_root.end = GPMC_MEM_END;
......
......@@ -23,9 +23,10 @@
#define GPMC_CS_NAND_DATA 0x24
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 20)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29)
#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27)
#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment