Skip to content

L
linux-davinci
Commit 70d9d825 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

parents 537a95d9 f896424c
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 792 additions and 507 deletions
Documentation/networking/s2io.txt
View file @ 70d9d825
S2IO Technologies XFrame 10 Gig adapter.
-------------------------------------------
I. Module loadable parameters.
When loaded as a module, the driver provides a host of Module loadable
parameters, so the device can be tuned as per the users needs.
A list of the Module params is given below.
(i) ring_num: This can be used to program the number of
receive rings used in the driver.
(ii) ring_len: This defines the number of descriptors each ring
can have. There can be a maximum of 8 rings.
(iii) frame_len: This is an array of size 8. Using this we can
set the maximum size of the received frame that can
be steered into the corrsponding receive ring.
(iv) fifo_num: This defines the number of Tx FIFOs thats used in
the driver.
(v) fifo_len: Each element defines the number of
Tx descriptors that can be associated with each
corresponding FIFO. There are a maximum of 8 FIFOs.
(vi) tx_prio: This is a bool, if module is loaded with a non-zero
value for tx_prio multi FIFO scheme is activated.
(vii) rx_prio: This is a bool, if module is loaded with a non-zero
value for tx_prio multi RING scheme is activated.
(viii) latency_timer: The value given against this param will be
loaded into the latency timer register in PCI Config
space, else the register is left with its reset value.
II. Performance tuning.
By changing a few sysctl parameters.
Copy the following lines into a file and run the following command,
"sysctl -p <file_name>"
### IPV4 specific settings
net.ipv4.tcp_timestamps = 0 # turns TCP timestamp support off, default 1, reduces CPU use
net.ipv4.tcp_sack = 0 # turn SACK support off, default on
# on systems with a VERY fast bus -> memory interface this is the big gainer
net.ipv4.tcp_rmem = 10000000 10000000 10000000 # sets min/default/max TCP read buffer, default 4096 87380 174760
net.ipv4.tcp_wmem = 10000000 10000000 10000000 # sets min/pressure/max TCP write buffer, default 4096 16384 131072
net.ipv4.tcp_mem = 10000000 10000000 10000000 # sets min/pressure/max TCP buffer space, default 31744 32256 32768
### CORE settings (mostly for socket and UDP effect)
net.core.rmem_max = 524287 # maximum receive socket buffer size, default 131071
net.core.wmem_max = 524287 # maximum send socket buffer size, default 131071
net.core.rmem_default = 524287 # default receive socket buffer size, default 65535
net.core.wmem_default = 524287 # default send socket buffer size, default 65535
net.core.optmem_max = 524287 # maximum amount of option memory buffers, default 10240
net.core.netdev_max_backlog = 300000 # number of unprocessed input packets before kernel starts dropping them, default 300
---End of performance tuning file---
Release notes for Neterion's (Formerly S2io) Xframe I/II PCI-X 10GbE driver.
Contents
=======
- 1. Introduction
- 2. Identifying the adapter/interface
- 3. Features supported
- 4. Command line parameters
- 5. Performance suggestions
- 6. Available Downloads
1. Introduction:
This Linux driver supports Neterion's Xframe I PCI-X 1.0 and
Xframe II PCI-X 2.0 adapters. It supports several features
such as jumbo frames, MSI/MSI-X, checksum offloads, TSO, UFO and so on.
See below for complete list of features.
All features are supported for both IPv4 and IPv6.
2. Identifying the adapter/interface:
a. Insert the adapter(s) in your system.
b. Build and load driver
# insmod s2io.ko
c. View log messages
# dmesg | tail -40
You will see messages similar to:
eth3: Neterion Xframe I 10GbE adapter (rev 3), Version 2.0.9.1, Intr type INTA
eth4: Neterion Xframe II 10GbE adapter (rev 2), Version 2.0.9.1, Intr type INTA
eth4: Device is on 64 bit 133MHz PCIX(M1) bus
The above messages identify the adapter type(Xframe I/II), adapter revision,
driver version, interface name(eth3, eth4), Interrupt type(INTA, MSI, MSI-X).
In case of Xframe II, the PCI/PCI-X bus width and frequency are displayed
as well.
To associate an interface with a physical adapter use "ethtool -p <ethX>".
The corresponding adapter's LED will blink multiple times.
3. Features supported:
a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes,
modifiable using ifconfig command.
b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit
and receive, TSO.
c. Multi-buffer receive mode. Scattering of packet across multiple
buffers. Currently driver supports 2-buffer mode which yields
significant performance improvement on certain platforms(SGI Altix,
IBM xSeries).
d. MSI/MSI-X. Can be enabled on platforms which support this feature
(IA64, Xeon) resulting in noticeable performance improvement(upto 7%
on certain platforms).
e. NAPI. Compile-time option(CONFIG_S2IO_NAPI) for better Rx interrupt
moderation.
f. Statistics. Comprehensive MAC-level and software statistics displayed
using "ethtool -S" option.
g. Multi-FIFO/Ring. Supports up to 8 transmit queues and receive rings,
with multiple steering options.
4. Command line parameters
a. tx_fifo_num
Number of transmit queues
Valid range: 1-8
Default: 1
b. rx_ring_num
Number of receive rings
Valid range: 1-8
Default: 1
c. tx_fifo_len
Size of each transmit queue
Valid range: Total length of all queues should not exceed 8192
Default: 4096
d. rx_ring_sz
Size of each receive ring(in 4K blocks)
Valid range: Limited by memory on system
Default: 30
e. intr_type
Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X)
Valid range: 1-3
Default: 1
5. Performance suggestions
General:
a. Set MTU to maximum(9000 for switch setup, 9600 in back-to-back configuration)
b. Set TCP windows size to optimal value.
For instance, for MTU=1500 a value of 210K has been observed to result in
good performance.
# sysctl -w net.ipv4.tcp_rmem="210000 210000 210000"
# sysctl -w net.ipv4.tcp_wmem="210000 210000 210000"
For MTU=9000, TCP window size of 10 MB is recommended.
# sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000"
# sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000"
Transmit performance:
a. By default, the driver respects BIOS settings for PCI bus parameters.
However, you may want to experiment with PCI bus parameters
max-split-transactions(MOST) and MMRBC (use setpci command).
A MOST value of 2 has been found optimal for Opterons and 3 for Itanium.
It could be different for your hardware.
Set MMRBC to 4K**.
For example you can set
For opteron
#setpci -d 17d5:* 62=1d
For Itanium
#setpci -d 17d5:* 62=3d
For detailed description of the PCI registers, please see Xframe User Guide.
b. Ensure Transmit Checksum offload is enabled. Use ethtool to set/verify this
parameter.
c. Turn on TSO(using "ethtool -K")
# ethtool -K <ethX> tso on
Receive performance:
a. By default, the driver respects BIOS settings for PCI bus parameters.
However, you may want to set PCI latency timer to 248.
#setpci -d 17d5:* LATENCY_TIMER=f8
For detailed description of the PCI registers, please see Xframe User Guide.
b. Use 2-buffer mode. This results in large performance boost on
on certain platforms(eg. SGI Altix, IBM xSeries).
c. Ensure Receive Checksum offload is enabled. Use "ethtool -K ethX" command to
set/verify this option.
d. Enable NAPI feature(in kernel configuration Device Drivers ---> Network
device support ---> Ethernet (10000 Mbit) ---> S2IO 10Gbe Xframe NIC) to
bring down CPU utilization.
** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are
recommended as safe parameters.
For more information, please review the AMD8131 errata at
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf
6. Available Downloads
Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up
to date, also the latest "s2io" code (including support for 2.4 kernels) is
available via "Support" link on the Neterion site: http://www.neterion.com.
For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com,
user: linuxdocs password: HALdocs
7. Support
For further support please contact either your 10GbE Xframe NIC vendor (IBM,
HP, SGI etc.) or click on the "Support" link on the Neterion site:
http://www.neterion.com.
MAINTAINERS
View file @ 70d9d825
......@@ -910,6 +910,15 @@ L: linux-fbdev-devel@lists.sourceforge.net
W: http://linux-fbdev.sourceforge.net/
S: Maintained
FREESCALE SOC FS_ENET DRIVER
P: Pantelis Antoniou
M: pantelis.antoniou@gmail.com
P: Vitaly Bordug
M: vbordug@ru.mvista.com
L: linuxppc-embedded@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
FILE LOCKING (flock() and fcntl()/lockf())
P: Matthew Wilcox
M: matthew@wil.cx
......
drivers/net/Kconfig
View file @ 70d9d825
......@@ -1203,7 +1203,7 @@ config IBM_EMAC_RX_SKB_HEADROOM
config IBM_EMAC_PHY_RX_CLK_FIX
bool "PHY Rx clock workaround"
depends on IBM_EMAC && (405EP || 440GX || 440EP)
depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
help
Enable this if EMAC attached to a PHY which doesn't generate
RX clock if there is no link, if this is the case, you will
......@@ -2258,17 +2258,6 @@ config S2IO_NAPI
If in doubt, say N.
config 2BUFF_MODE
bool "Use 2 Buffer Mode on Rx side."
depends on S2IO
---help---
On enabling the 2 buffer mode, the received frame will be
split into 2 parts before being DMA'ed to the hosts memory.
The parts are the ethernet header and ethernet payload.
This is useful on systems where DMA'ing to to unaligned
physical memory loactions comes with a heavy price.
If not sure please say N.
endmenu
if !UML
......
drivers/net/fec_8xx/Kconfig
View file @ 70d9d825
config FEC_8XX
tristate "Motorola 8xx FEC driver"
depends on NET_ETHERNET && 8xx && (NETTA || NETPHONE)
depends on NET_ETHERNET
select MII
config FEC_8XX_GENERIC_PHY
......@@ -12,3 +12,9 @@ config FEC_8XX_DM9161_PHY
bool "Support DM9161 PHY"
depends on FEC_8XX
default n
config FEC_8XX_LXT971_PHY
bool "Support LXT971/LXT972 PHY"
depends on FEC_8XX
default n
drivers/net/fec_8xx/fec_mii.c
View file @ 70d9d825
......@@ -203,6 +203,39 @@ static void dm9161_shutdown(struct net_device *dev)
#endif
#ifdef CONFIG_FEC_8XX_LXT971_PHY
/* Support for LXT971/972 PHY */
#define MII_LXT971_PCR 16 /* Port Control Register */
#define MII_LXT971_SR2 17 /* Status Register 2 */
#define MII_LXT971_IER 18 /* Interrupt Enable Register */
#define MII_LXT971_ISR 19 /* Interrupt Status Register */
#define MII_LXT971_LCR 20 /* LED Control Register */
#define MII_LXT971_TCR 30 /* Transmit Control Register */
static void lxt971_startup(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x00F2);
}
static void lxt971_ack_int(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
fec_mii_read(dev, fep->mii_if.phy_id, MII_LXT971_ISR);
}
static void lxt971_shutdown(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x0000);
}
#endif
/**********************************************************************************/
static const struct phy_info phy_info[] = {
......@@ -215,6 +248,15 @@ static const struct phy_info phy_info[] = {
.shutdown = dm9161_shutdown,
},
#endif
#ifdef CONFIG_FEC_8XX_LXT971_PHY
{
.id = 0x0001378e,
.name = "LXT971/972",
.startup = lxt971_startup,
.ack_int = lxt971_ack_int,
.shutdown = lxt971_shutdown,
},
#endif
#ifdef CONFIG_FEC_8XX_GENERIC_PHY
{
.id = 0,
......
drivers/net/fs_enet/fs_enet-main.c
View file @ 70d9d825
......@@ -130,7 +130,7 @@ static int fs_enet_rx_napi(struct net_device *dev, int *budget)
skb = fep->rx_skbuff[curidx];
dma_unmap_single(fep->dev, skb->data,
dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
......@@ -144,7 +144,7 @@ static int fs_enet_rx_napi(struct net_device *dev, int *budget)
skb = fep->rx_skbuff[curidx];
dma_unmap_single(fep->dev, skb->data,
dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
......@@ -268,7 +268,7 @@ static int fs_enet_rx_non_napi(struct net_device *dev)
skb = fep->rx_skbuff[curidx];
dma_unmap_single(fep->dev, skb->data,
dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
......@@ -278,7 +278,7 @@ static int fs_enet_rx_non_napi(struct net_device *dev)
skb = fep->rx_skbuff[curidx];
dma_unmap_single(fep->dev, skb->data,
dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
......@@ -399,7 +399,8 @@ static void fs_enet_tx(struct net_device *dev)
fep->stats.collisions++;
/* unmap */
dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
skb->len, DMA_TO_DEVICE);
/*
* Free the sk buffer associated with this last transmit.
......@@ -547,17 +548,19 @@ void fs_cleanup_bds(struct net_device *dev)
{
struct fs_enet_private *fep = netdev_priv(dev);
struct sk_buff *skb;
cbd_t *bdp;
int i;
/*
* Reset SKB transmit buffers.
*/
for (i = 0; i < fep->tx_ring; i++) {
for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) {
if ((skb = fep->tx_skbuff[i]) == NULL)
continue;
/* unmap */
dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
skb->len, DMA_TO_DEVICE);
fep->tx_skbuff[i] = NULL;
dev_kfree_skb(skb);
......@@ -566,12 +569,12 @@ void fs_cleanup_bds(struct net_device *dev)
/*
* Reset SKB receive buffers
*/
for (i = 0; i < fep->rx_ring; i++) {
for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) {
if ((skb = fep->rx_skbuff[i]) == NULL)
continue;
/* unmap */
dma_unmap_single(fep->dev, skb->data,
dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
......
drivers/net/ibm_emac/ibm_emac.h
View file @ 70d9d825
......@@ -26,7 +26,8 @@
/* This is a simple check to prevent use of this driver on non-tested SoCs */
#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
!defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
!defined(CONFIG_440EP) && !defined(CONFIG_NP405H)
!defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \
!defined(CONFIG_440GR)
#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
#endif
......@@ -246,6 +247,25 @@ struct emac_regs {
#define EMAC_STACR_PCDA_SHIFT 5
#define EMAC_STACR_PRA_MASK 0x1f
/*
* For the 440SPe, AMCC inexplicably changed the polarity of
* the "operation complete" bit in the MII control register.
*/
#if defined(CONFIG_440SPE)
static inline int emac_phy_done(u32 stacr)
{
return !(stacr & EMAC_STACR_OC);
};
#define EMAC_STACR_START EMAC_STACR_OC
#else /* CONFIG_440SPE */
static inline int emac_phy_done(u32 stacr)
{
return stacr & EMAC_STACR_OC;
};
#define EMAC_STACR_START 0
#endif /* !CONFIG_440SPE */
/* EMACx_TRTR */
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_TRTR_SHIFT 27
......
drivers/net/ibm_emac/ibm_emac_core.c
View file @ 70d9d825
......@@ -87,10 +87,11 @@ MODULE_LICENSE("GPL");
*/
static u32 busy_phy_map;
#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP))
#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \
(defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR))
/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
* with PHY RX clock problem.
* 440EP has more sane SDR0_MFR register implementation than 440GX, which
* 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which
* also allows controlling each EMAC clock
*/
static inline void EMAC_RX_CLK_TX(int idx)
......@@ -100,7 +101,7 @@ static inline void EMAC_RX_CLK_TX(int idx)
#if defined(CONFIG_405EP)
mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
#else /* CONFIG_440EP */
#else /* CONFIG_440EP || CONFIG_440GR */
SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
#endif
......@@ -546,7 +547,7 @@ static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
/* Wait for management interface to become idle */
n = 10;
while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
......@@ -556,11 +557,12 @@ static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
out_be32(&p->stacr,
EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
(reg & EMAC_STACR_PRA_MASK)
| ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT));
| ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)
| EMAC_STACR_START);
/* Wait for read to complete */
n = 100;
while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) {
while (!emac_phy_done(r = in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
......@@ -594,7 +596,7 @@ static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
/* Wait for management interface to be idle */
n = 10;
while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
......@@ -605,11 +607,11 @@ static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
(reg & EMAC_STACR_PRA_MASK) |
((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
(val << EMAC_STACR_PHYD_SHIFT));
(val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START);
/* Wait for write to complete */
n = 100;
while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
......
drivers/net/ibm_emac/ibm_emac_mal.h
View file @ 70d9d825
......@@ -32,9 +32,10 @@
* reflect the fact that 40x and 44x have slightly different MALs. --ebs
*/
#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
defined(CONFIG_440EP) || defined(CONFIG_NP405H)
defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H)
#define MAL_VERSION 1
#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP)
#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
defined(CONFIG_440SPE)
#define MAL_VERSION 2
#else
#error "Unknown SoC, please check chip manual and choose MAL 'version'"
......
drivers/net/ibm_emac/ibm_emac_phy.c
View file @ 70d9d825
......@@ -236,12 +236,16 @@ static struct mii_phy_def genmii_phy_def = {
};
/* CIS8201 */
#define MII_CIS8201_10BTCSR 0x16
#define TENBTCSR_ECHO_DISABLE 0x2000
#define MII_CIS8201_EPCR 0x17
#define EPCR_MODE_MASK 0x3000
#define EPCR_GMII_MODE 0x0000
#define EPCR_RGMII_MODE 0x1000
#define EPCR_TBI_MODE 0x2000
#define EPCR_RTBI_MODE 0x3000
#define MII_CIS8201_ACSR 0x1c
#define ACSR_PIN_PRIO_SELECT 0x0004
static int cis8201_init(struct mii_phy *phy)
{
......@@ -269,6 +273,14 @@ static int cis8201_init(struct mii_phy *phy)
}
phy_write(phy, MII_CIS8201_EPCR, epcr);
/* MII regs override strap pins */
phy_write(phy, MII_CIS8201_ACSR,
phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
/* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
phy_write(phy, MII_CIS8201_10BTCSR,
phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
return 0;
}
......
drivers/net/pcnet32.c
View file @ 70d9d825
......@@ -22,8 +22,8 @@
*************************************************************************/
#define DRV_NAME "pcnet32"
#define DRV_VERSION "1.31a"
#define DRV_RELDATE "12.Sep.2005"
#define DRV_VERSION "1.31c"
#define DRV_RELDATE "01.Nov.2005"
#define PFX DRV_NAME ": "
static const char *version =
......@@ -260,6 +260,11 @@ static int homepna[MAX_UNITS];
* v1.31 02 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> added set_ringparam().
* v1.31a 12 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> set min ring size to 4
* to allow loopback test to work unchanged.
* v1.31b 06 Oct 2005 Don Fry changed alloc_ring to show name of device
* if allocation fails
* v1.31c 01 Nov 2005 Don Fry Allied Telesyn 2700/2701 FX are 100Mbit only.
* Force 100Mbit FD if Auto (ASEL) is selected.
* See Bugzilla 2669 and 4551.
*/
......@@ -408,7 +413,7 @@ static int pcnet32_get_regs_len(struct net_device *dev);
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
static void pcnet32_purge_tx_ring(struct net_device *dev);
static int pcnet32_alloc_ring(struct net_device *dev);
static int pcnet32_alloc_ring(struct net_device *dev, char *name);
static void pcnet32_free_ring(struct net_device *dev);
......@@ -669,15 +674,17 @@ static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringpara
lp->rx_mod_mask = lp->rx_ring_size - 1;
lp->rx_len_bits = (i << 4);
if (pcnet32_alloc_ring(dev)) {
if (pcnet32_alloc_ring(dev, dev->name)) {
pcnet32_free_ring(dev);
spin_unlock_irqrestore(&lp->lock, flags);
return -ENOMEM;
}
spin_unlock_irqrestore(&lp->lock, flags);
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_INFO PFX "Ring Param Settings: RX: %d, TX: %d\n", lp->rx_ring_size, lp->tx_ring_size);
printk(KERN_INFO PFX "%s: Ring Param Settings: RX: %d, TX: %d\n",
dev->name, lp->rx_ring_size, lp->tx_ring_size);
if (netif_running(dev))
pcnet32_open(dev);
......@@ -981,7 +988,11 @@ static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
*buff++ = a->read_csr(ioaddr, 114);
/* read bus configuration registers */
for (i=0; i<36; i++) {
for (i=0; i<30; i++) {
*buff++ = a->read_bcr(ioaddr, i);
}
*buff++ = 0; /* skip bcr30 so as not to hang 79C976 */
for (i=31; i<36; i++) {
*buff++ = a->read_bcr(ioaddr, i);
}
......@@ -1340,7 +1351,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
}
lp->a = *a;
if (pcnet32_alloc_ring(dev)) {
/* prior to register_netdev, dev->name is not yet correct */
if (pcnet32_alloc_ring(dev, pci_name(lp->pci_dev))) {
ret = -ENOMEM;
goto err_free_ring;
}
......@@ -1448,48 +1460,63 @@ err_release_region:
}
static int pcnet32_alloc_ring(struct net_device *dev)
/* if any allocation fails, caller must also call pcnet32_free_ring */
static int pcnet32_alloc_ring(struct net_device *dev, char *name)
{
struct pcnet32_private *lp = dev->priv;
if ((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size,
&lp->tx_ring_dma_addr)) == NULL) {
lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
sizeof(struct pcnet32_tx_head) * lp->tx_ring_size,
&lp->tx_ring_dma_addr);
if (lp->tx_ring == NULL) {
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_ERR PFX "Consistent memory allocation failed.\n");
printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n",
name);
return -ENOMEM;
}
if ((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size,
&lp->rx_ring_dma_addr)) == NULL) {
lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
sizeof(struct pcnet32_rx_head) * lp->rx_ring_size,
&lp->rx_ring_dma_addr);
if (lp->rx_ring == NULL) {
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_ERR PFX "Consistent memory allocation failed.\n");
printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n",
name);
return -ENOMEM;
}
if (!(lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, GFP_ATOMIC))) {
lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size,
GFP_ATOMIC);
if (!lp->tx_dma_addr) {
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_ERR PFX "Memory allocation failed.\n");
printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size);
if (!(lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, GFP_ATOMIC))) {
lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size,
GFP_ATOMIC);
if (!lp->rx_dma_addr) {
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_ERR PFX "Memory allocation failed.\n");
printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size);
if (!(lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, GFP_ATOMIC))) {
lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size,
GFP_ATOMIC);
if (!lp->tx_skbuff) {
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_ERR PFX "Memory allocation failed.\n");
printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size);
if (!(lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, GFP_ATOMIC))) {
lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size,
GFP_ATOMIC);
if (!lp->rx_skbuff) {
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_ERR PFX "Memory allocation failed.\n");
printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size);
......@@ -1592,12 +1619,18 @@ pcnet32_open(struct net_device *dev)
val |= 0x10;
lp->a.write_csr (ioaddr, 124, val);
/* Allied Telesyn AT 2700/2701 FX looses the link, so skip that */
/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
(lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
printk(KERN_DEBUG "%s: Skipping PHY selection.\n", dev->name);
} else {
(lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
if (lp->options & PCNET32_PORT_ASEL) {
lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
if (netif_msg_link(lp))
printk(KERN_DEBUG "%s: Setting 100Mb-Full Duplex.\n",
dev->name);
}
}
{
/*
* 24 Jun 2004 according AMD, in order to change the PHY,
* DANAS (or DISPM for 79C976) must be set; then select the speed,
......
drivers/net/phy/mdio_bus.c
View file @ 70d9d825
......@@ -61,6 +61,9 @@ int mdiobus_register(struct mii_bus *bus)
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *phydev;
if (bus->phy_mask & (1 << i))
continue;
phydev = get_phy_device(bus, i);
if (IS_ERR(phydev))
......
drivers/net/s2io.c
View file @ 70d9d825
This diff is collapsed.
drivers/net/s2io.h
View file @ 70d9d825
......@@ -418,7 +418,7 @@ typedef struct list_info_hold {
void *list_virt_addr;
} list_info_hold_t;
/* Rx descriptor structure */
/* Rx descriptor structure for 1 buffer mode */
typedef struct _RxD_t {
u64 Host_Control; /* reserved for host */
u64 Control_1;
......@@ -439,49 +439,54 @@ typedef struct _RxD_t {
#define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2)
#define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62)
#ifndef CONFIG_2BUFF_MODE
#define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14)
#define SET_BUFFER0_SIZE(val) vBIT(val,2,14)
#else
#define MASK_BUFFER0_SIZE vBIT(0xFF,2,14)
#define MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16)
#define MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16)
#define SET_BUFFER0_SIZE(val) vBIT(val,8,8)
#define SET_BUFFER1_SIZE(val) vBIT(val,16,16)
#define SET_BUFFER2_SIZE(val) vBIT(val,32,16)
#endif
#define MASK_VLAN_TAG vBIT(0xFFFF,48,16)
#define SET_VLAN_TAG(val) vBIT(val,48,16)
#define SET_NUM_TAG(val) vBIT(val,16,32)
#ifndef CONFIG_2BUFF_MODE
#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0x3FFF,2,14)))
#else
#define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \
>> 48)
#define RXD_GET_BUFFER1_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER1_SIZE) \
>> 32)
#define RXD_GET_BUFFER2_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER2_SIZE) \
>> 16)
} RxD_t;
/* Rx descriptor structure for 1 buffer mode */
typedef struct _RxD1_t {
struct _RxD_t h;
#define MASK_BUFFER0_SIZE_1 vBIT(0x3FFF,2,14)
#define SET_BUFFER0_SIZE_1(val) vBIT(val,2,14)
#define RXD_GET_BUFFER0_SIZE_1(_Control_2) \
(u16)((_Control_2 & MASK_BUFFER0_SIZE_1) >> 48)
u64 Buffer0_ptr;
} RxD1_t;
/* Rx descriptor structure for 3 or 2 buffer mode */
typedef struct _RxD3_t {
struct _RxD_t h;
#define MASK_BUFFER0_SIZE_3 vBIT(0xFF,2,14)
#define MASK_BUFFER1_SIZE_3 vBIT(0xFFFF,16,16)
#define MASK_BUFFER2_SIZE_3 vBIT(0xFFFF,32,16)
#define SET_BUFFER0_SIZE_3(val) vBIT(val,8,8)
#define SET_BUFFER1_SIZE_3(val) vBIT(val,16,16)
#define SET_BUFFER2_SIZE_3(val) vBIT(val,32,16)
#define RXD_GET_BUFFER0_SIZE_3(Control_2) \
(u8)((Control_2 & MASK_BUFFER0_SIZE_3) >> 48)
#define RXD_GET_BUFFER1_SIZE_3(Control_2) \
(u16)((Control_2 & MASK_BUFFER1_SIZE_3) >> 32)
#define RXD_GET_BUFFER2_SIZE_3(Control_2) \
(u16)((Control_2 & MASK_BUFFER2_SIZE_3) >> 16)
#define BUF0_LEN 40
#define BUF1_LEN 1
#endif
u64 Buffer0_ptr;
#ifdef CONFIG_2BUFF_MODE
u64 Buffer1_ptr;
u64 Buffer2_ptr;
#endif
} RxD_t;
} RxD3_t;
/* Structure that represents the Rx descriptor block which contains
* 128 Rx descriptors.
*/
#ifndef CONFIG_2BUFF_MODE
typedef struct _RxD_block {
#define MAX_RXDS_PER_BLOCK 127
RxD_t rxd[MAX_RXDS_PER_BLOCK];
#define MAX_RXDS_PER_BLOCK_1 127
RxD1_t rxd[MAX_RXDS_PER_BLOCK_1];
u64 reserved_0;
#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
......@@ -492,18 +497,13 @@ typedef struct _RxD_block {
* the upper 32 bits should
* be 0 */
} RxD_block_t;
#else
typedef struct _RxD_block {
#define MAX_RXDS_PER_BLOCK 85
RxD_t rxd[MAX_RXDS_PER_BLOCK];
#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd
* in this blk */
u64 pNext_RxD_Blk_physical; /* Phy ponter to next blk. */
} RxD_block_t;
#define SIZE_OF_BLOCK 4096
#define RXD_MODE_1 0
#define RXD_MODE_3A 1
#define RXD_MODE_3B 2
/* Structure to hold virtual addresses of Buf0 and Buf1 in
* 2buf mode. */
typedef struct bufAdd {
......@@ -512,7 +512,6 @@ typedef struct bufAdd {
void *ba_0;
void *ba_1;
} buffAdd_t;
#endif
/* Structure which stores all the MAC control parameters */
......@@ -539,10 +538,17 @@ typedef struct {
typedef tx_curr_get_info_t tx_curr_put_info_t;
typedef struct rxd_info {
void *virt_addr;
dma_addr_t dma_addr;
}rxd_info_t;
/* Structure that holds the Phy and virt addresses of the Blocks */
typedef struct rx_block_info {
RxD_t *block_virt_addr;
void *block_virt_addr;
dma_addr_t block_dma_addr;
rxd_info_t *rxds;
} rx_block_info_t;
/* pre declaration of the nic structure */
......@@ -578,10 +584,8 @@ typedef struct ring_info {
int put_pos;
#endif
#ifdef CONFIG_2BUFF_MODE
/* Buffer Address store. */
buffAdd_t **ba;
#endif
nic_t *nic;
} ring_info_t;
......@@ -647,8 +651,6 @@ typedef struct {
/* Default Tunable parameters of the NIC. */
#define DEFAULT_FIFO_LEN 4096
#define SMALL_RXD_CNT 30 * (MAX_RXDS_PER_BLOCK+1)
#define LARGE_RXD_CNT 100 * (MAX_RXDS_PER_BLOCK+1)
#define SMALL_BLK_CNT 30
#define LARGE_BLK_CNT 100
......@@ -678,6 +680,7 @@ struct msix_info_st {
/* Structure representing one instance of the NIC */
struct s2io_nic {
int rxd_mode;
#ifdef CONFIG_S2IO_NAPI
/*
* Count of packets to be processed in a given iteration, it will be indicated
......
drivers/net/wireless/airo.c
View file @ 70d9d825
......@@ -2040,7 +2040,7 @@ static int mpi_send_packet (struct net_device *dev)
return 1;
}
static void get_tx_error(struct airo_info *ai, u32 fid)
static void get_tx_error(struct airo_info *ai, s32 fid)
{
u16 status;
......
include/linux/phy.h
View file @ 70d9d825
......@@ -72,6 +72,9 @@ struct mii_bus {
/* list of all PHYs on bus */
struct phy_device *phy_map[PHY_MAX_ADDR];
/* Phy addresses to be ignored when probing */
u32 phy_mask;
/* Pointer to an array of interrupts, each PHY's
* interrupt at the index matching its address */
int *irq;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment