Commit 6c2b374d authored by Zhang, Yanmin's avatar Zhang, Yanmin Committed by Greg Kroah-Hartman

PCI-Express AER implemetation: AER core and aerdriver

Patch 3 implements the core part of PCI-Express AER and aerdrv
port service driver.

When a root port service device is probed, the aerdrv will call
request_irq to register irq handler for AER error interrupt.

When a device sends an PCI-Express error message to the root port,
the root port will trigger an interrupt, by either MSI or IO-APIC,
then kernel would run the irq handler. The handler collects root
error status register and schedules a work. The work will call
the core part to process the error based on its type
(Correctable/non-fatal/fatal).

As for Correctable errors, the patch chooses to just clear the correctable
error status register of the device.

As for the non-fatal error, the patch follows generic PCI error handler
rules to call the error callback functions of the endpoint's driver. If
the device is a bridge, the patch chooses to broadcast the error to
downstream devices.

As for the fatal error, the patch resets the pci-express link and
follows generic PCI error handler rules to call the error callback
functions of the endpoint's driver. If the device is a bridge, the patch
chooses to broadcast the error to downstream devices.
Signed-off-by: default avatarZhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 48408157
......@@ -34,3 +34,4 @@ config HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
When in doubt, say N.
source "drivers/pci/pcie/aer/Kconfig"
......@@ -5,3 +5,6 @@
pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
# Build PCI Express AER if needed
obj-$(CONFIG_PCIEAER) += aer/
#
# PCI Express Root Port Device AER Configuration
#
config PCIEAER
boolean "Root Port Advanced Error Reporting support"
depends on PCIEPORTBUS && ACPI
default y
help
This enables PCI Express Root Port Advanced Error Reporting
(AER) driver support. Error reporting messages sent to Root
Port will be handled by PCI Express AER driver.
#
# Makefile for PCI-Express Root Port Advanced Error Reporting Driver
#
obj-$(CONFIG_PCIEAER) += aerdriver.o
aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdrv_acpi.o
/*
* drivers/pci/pcie/aer/aerdrv.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* This file implements the AER root port service driver. The driver will
* register an irq handler. When root port triggers an AER interrupt, the irq
* handler will collect root port status and schedule a work.
*
* Copyright (C) 2006 Intel Corp.
* Tom Long Nguyen (tom.l.nguyen@intel.com)
* Zhang Yanmin (yanmin.zhang@intel.com)
*
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/pcieport_if.h>
#include "aerdrv.h"
/*
* Version Information
*/
#define DRIVER_VERSION "v1.0"
#define DRIVER_AUTHOR "tom.l.nguyen@intel.com"
#define DRIVER_DESC "Root Port Advanced Error Reporting Driver"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
static int __devinit aer_probe (struct pcie_device *dev,
const struct pcie_port_service_id *id );
static void aer_remove(struct pcie_device *dev);
static int aer_suspend(struct pcie_device *dev, pm_message_t state)
{return 0;}
static int aer_resume(struct pcie_device *dev) {return 0;}
static pci_ers_result_t aer_error_detected(struct pci_dev *dev,
enum pci_channel_state error);
static void aer_error_resume(struct pci_dev *dev);
static pci_ers_result_t aer_root_reset(struct pci_dev *dev);
/*
* PCI Express bus's AER Root service driver data structure
*/
static struct pcie_port_service_id aer_id[] = {
{
.vendor = PCI_ANY_ID,
.device = PCI_ANY_ID,
.port_type = PCIE_RC_PORT,
.service_type = PCIE_PORT_SERVICE_AER,
},
{ /* end: all zeroes */ }
};
static struct pci_error_handlers aer_error_handlers = {
.error_detected = aer_error_detected,
.resume = aer_error_resume,
};
static struct pcie_port_service_driver aerdrv = {
.name = "aer",
.id_table = &aer_id[0],
.probe = aer_probe,
.remove = aer_remove,
.suspend = aer_suspend,
.resume = aer_resume,
.err_handler = &aer_error_handlers,
.reset_link = aer_root_reset,
};
/**
* aer_irq - Root Port's ISR
* @irq: IRQ assigned to Root Port
* @context: pointer to Root Port data structure
* @r: pointer struct pt_regs
*
* Invoked when Root Port detects AER messages.
**/
static irqreturn_t aer_irq(int irq, void *context, struct pt_regs * r)
{
unsigned int status, id;
struct pcie_device *pdev = (struct pcie_device *)context;
struct aer_rpc *rpc = get_service_data(pdev);
int next_prod_idx;
unsigned long flags;
int pos;
pos = pci_find_aer_capability(pdev->port);
/*
* Must lock access to Root Error Status Reg, Root Error ID Reg,
* and Root error producer/consumer index
*/
spin_lock_irqsave(&rpc->e_lock, flags);
/* Read error status */
pci_read_config_dword(pdev->port, pos + PCI_ERR_ROOT_STATUS, &status);
if (!(status & ROOT_ERR_STATUS_MASKS)) {
spin_unlock_irqrestore(&rpc->e_lock, flags);
return IRQ_NONE;
}
/* Read error source and clear error status */
pci_read_config_dword(pdev->port, pos + PCI_ERR_ROOT_COR_SRC, &id);
pci_write_config_dword(pdev->port, pos + PCI_ERR_ROOT_STATUS, status);
/* Store error source for later DPC handler */
next_prod_idx = rpc->prod_idx + 1;
if (next_prod_idx == AER_ERROR_SOURCES_MAX)
next_prod_idx = 0;
if (next_prod_idx == rpc->cons_idx) {
/*
* Error Storm Condition - possibly the same error occurred.
* Drop the error.
*/
spin_unlock_irqrestore(&rpc->e_lock, flags);
return IRQ_HANDLED;
}
rpc->e_sources[rpc->prod_idx].status = status;
rpc->e_sources[rpc->prod_idx].id = id;
rpc->prod_idx = next_prod_idx;
spin_unlock_irqrestore(&rpc->e_lock, flags);
/* Invoke DPC handler */
schedule_work(&rpc->dpc_handler);
return IRQ_HANDLED;
}
/**
* aer_alloc_rpc - allocate Root Port data structure
* @dev: pointer to the pcie_dev data structure
*
* Invoked when Root Port's AER service is loaded.
**/
static struct aer_rpc* aer_alloc_rpc(struct pcie_device *dev)
{
struct aer_rpc *rpc;
if (!(rpc = (struct aer_rpc *)kmalloc(sizeof(struct aer_rpc),
GFP_KERNEL)))
return NULL;
memset(rpc, 0, sizeof(struct aer_rpc));
/*
* Initialize Root lock access, e_lock, to Root Error Status Reg,
* Root Error ID Reg, and Root error producer/consumer index.
*/
rpc->e_lock = SPIN_LOCK_UNLOCKED;
rpc->rpd = dev;
INIT_WORK(&rpc->dpc_handler, aer_isr, (void *)dev);
rpc->prod_idx = rpc->cons_idx = 0;
mutex_init(&rpc->rpc_mutex);
init_waitqueue_head(&rpc->wait_release);
/* Use PCIE bus function to store rpc into PCIE device */
set_service_data(dev, rpc);
return rpc;
}
/**
* aer_remove - clean up resources
* @dev: pointer to the pcie_dev data structure
*
* Invoked when PCI Express bus unloads or AER probe fails.
**/
static void aer_remove(struct pcie_device *dev)
{
struct aer_rpc *rpc = get_service_data(dev);
if (rpc) {
/* If register interrupt service, it must be free. */
if (rpc->isr)
free_irq(dev->irq, dev);
wait_event(rpc->wait_release, rpc->prod_idx == rpc->cons_idx);
aer_delete_rootport(rpc);
set_service_data(dev, NULL);
}
}
/**
* aer_probe - initialize resources
* @dev: pointer to the pcie_dev data structure
* @id: pointer to the service id data structure
*
* Invoked when PCI Express bus loads AER service driver.
**/
static int __devinit aer_probe (struct pcie_device *dev,
const struct pcie_port_service_id *id )
{
int status;
struct aer_rpc *rpc;
struct device *device = &dev->device;
/* Init */
if ((status = aer_init(dev)))
return status;
/* Alloc rpc data structure */
if (!(rpc = aer_alloc_rpc(dev))) {
printk(KERN_DEBUG "%s: Alloc rpc fails on PCIE device[%s]\n",
__FUNCTION__, device->bus_id);
aer_remove(dev);
return -ENOMEM;
}
/* Request IRQ ISR */
if ((status = request_irq(dev->irq, aer_irq, SA_SHIRQ, "aerdrv",
dev))) {
printk(KERN_DEBUG "%s: Request ISR fails on PCIE device[%s]\n",
__FUNCTION__, device->bus_id);
aer_remove(dev);
return status;
}
rpc->isr = 1;
aer_enable_rootport(rpc);
return status;
}
/**
* aer_root_reset - reset link on Root Port
* @dev: pointer to Root Port's pci_dev data structure
*
* Invoked by Port Bus driver when performing link reset at Root Port.
**/
static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
{
u16 p2p_ctrl;
u32 status;
int pos;
pos = pci_find_aer_capability(dev);
/* Disable Root's interrupt in response to error messages */
pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, 0);
/* Assert Secondary Bus Reset */
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
p2p_ctrl |= PCI_CB_BRIDGE_CTL_CB_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
/* De-assert Secondary Bus Reset */
p2p_ctrl &= ~PCI_CB_BRIDGE_CTL_CB_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
/*
* System software must wait for at least 100ms from the end
* of a reset of one or more device before it is permitted
* to issue Configuration Requests to those devices.
*/
msleep(200);
printk(KERN_DEBUG "Complete link reset at Root[%s]\n", dev->dev.bus_id);
/* Enable Root Port's interrupt in response to error messages */
pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, status);
pci_write_config_dword(dev,
pos + PCI_ERR_ROOT_COMMAND,
ROOT_PORT_INTR_ON_MESG_MASK);
return PCI_ERS_RESULT_RECOVERED;
}
/**
* aer_error_detected - update severity status
* @dev: pointer to Root Port's pci_dev data structure
* @error: error severity being notified by port bus
*
* Invoked by Port Bus driver during error recovery.
**/
static pci_ers_result_t aer_error_detected(struct pci_dev *dev,
enum pci_channel_state error)
{
/* Root Port has no impact. Always recovers. */
return PCI_ERS_RESULT_CAN_RECOVER;
}
/**
* aer_error_resume - clean up corresponding error status bits
* @dev: pointer to Root Port's pci_dev data structure
*
* Invoked by Port Bus driver during nonfatal recovery.
**/
static void aer_error_resume(struct pci_dev *dev)
{
int pos;
u32 status, mask;
u16 reg16;
/* Clean up Root device status */
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &reg16);
pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, reg16);
/* Clean AER Root Error Status */
pos = pci_find_aer_capability(dev);
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
if (dev->error_state == pci_channel_io_normal)
status &= ~mask; /* Clear corresponding nonfatal bits */
else
status &= mask; /* Clear corresponding fatal bits */
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
}
/**
* aer_service_init - register AER root service driver
*
* Invoked when AER root service driver is loaded.
**/
static int __init aer_service_init(void)
{
return pcie_port_service_register(&aerdrv);
}
/**
* aer_service_exit - unregister AER root service driver
*
* Invoked when AER root service driver is unloaded.
**/
static void __exit aer_service_exit(void)
{
pcie_port_service_unregister(&aerdrv);
}
module_init(aer_service_init);
module_exit(aer_service_exit);
/*
* Copyright (C) 2006 Intel Corp.
* Tom Long Nguyen (tom.l.nguyen@intel.com)
* Zhang Yanmin (yanmin.zhang@intel.com)
*
*/
#ifndef _AERDRV_H_
#define _AERDRV_H_
#include <linux/pcieport_if.h>
#include <linux/aer.h>
#define AER_NONFATAL 0
#define AER_FATAL 1
#define AER_CORRECTABLE 2
#define AER_UNCORRECTABLE 4
#define AER_ERROR_MASK 0x001fffff
#define AER_ERROR(d) (d & AER_ERROR_MASK)
#define OSC_METHOD_RUN_SUCCESS 0
#define OSC_METHOD_NOT_SUPPORTED 1
#define OSC_METHOD_RUN_FAILURE 2
/* Root Error Status Register Bits */
#define ROOT_ERR_STATUS_MASKS 0x0f
#define SYSTEM_ERROR_INTR_ON_MESG_MASK (PCI_EXP_RTCTL_SECEE| \
PCI_EXP_RTCTL_SENFEE| \
PCI_EXP_RTCTL_SEFEE)
#define ROOT_PORT_INTR_ON_MESG_MASK (PCI_ERR_ROOT_CMD_COR_EN| \
PCI_ERR_ROOT_CMD_NONFATAL_EN| \
PCI_ERR_ROOT_CMD_FATAL_EN)
#define ERR_COR_ID(d) (d & 0xffff)
#define ERR_UNCOR_ID(d) (d >> 16)
#define AER_SUCCESS 0
#define AER_UNSUCCESS 1
#define AER_ERROR_SOURCES_MAX 100
#define AER_LOG_TLP_MASKS (PCI_ERR_UNC_POISON_TLP| \
PCI_ERR_UNC_ECRC| \
PCI_ERR_UNC_UNSUP| \
PCI_ERR_UNC_COMP_ABORT| \
PCI_ERR_UNC_UNX_COMP| \
PCI_ERR_UNC_MALF_TLP)
/* AER Error Info Flags */
#define AER_TLP_HEADER_VALID_FLAG 0x00000001
#define AER_MULTI_ERROR_VALID_FLAG 0x00000002
#define ERR_CORRECTABLE_ERROR_MASK 0x000031c1
#define ERR_UNCORRECTABLE_ERROR_MASK 0x001ff010
struct header_log_regs {
unsigned int dw0;
unsigned int dw1;
unsigned int dw2;
unsigned int dw3;
};
struct aer_err_info {
int severity; /* 0:NONFATAL | 1:FATAL | 2:COR */
int flags;
unsigned int status; /* COR/UNCOR Error Status */
struct header_log_regs tlp; /* TLP Header */
};
struct aer_err_source {
unsigned int status;
unsigned int id;
};
struct aer_rpc {
struct pcie_device *rpd; /* Root Port device */
struct work_struct dpc_handler;
struct aer_err_source e_sources[AER_ERROR_SOURCES_MAX];
unsigned short prod_idx; /* Error Producer Index */
unsigned short cons_idx; /* Error Consumer Index */
int isr;
spinlock_t e_lock; /*
* Lock access to Error Status/ID Regs
* and error producer/consumer index
*/
struct mutex rpc_mutex; /*
* only one thread could do
* recovery on the same
* root port hierachy
*/
wait_queue_head_t wait_release;
};
struct aer_broadcast_data {
enum pci_channel_state state;
enum pci_ers_result result;
};
static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
enum pci_ers_result new)
{
switch (orig) {
case PCI_ERS_RESULT_CAN_RECOVER:
case PCI_ERS_RESULT_RECOVERED:
orig = new;
break;
case PCI_ERS_RESULT_DISCONNECT:
if (new == PCI_ERS_RESULT_NEED_RESET)
orig = new;
break;
default:
break;
}
return orig;
}
extern struct bus_type pcie_port_bus_type;
extern void aer_enable_rootport(struct aer_rpc *rpc);
extern void aer_delete_rootport(struct aer_rpc *rpc);
extern int aer_init(struct pcie_device *dev);
extern void aer_isr(void *context);
extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
extern int aer_osc_setup(struct pci_dev *dev);
#endif //_AERDRV_H_
/*
* Access ACPI _OSC method
*
* Copyright (C) 2006 Intel Corp.
* Tom Long Nguyen (tom.l.nguyen@intel.com)
* Zhang Yanmin (yanmin.zhang@intel.com)
*
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/suspend.h>
#include <linux/acpi.h>
#include <linux/pci-acpi.h>
#include <linux/delay.h>
#include "aerdrv.h"
/**
* aer_osc_setup - run ACPI _OSC method
*
* Return:
* Zero if success. Nonzero for otherwise.
*
* Invoked when PCIE bus loads AER service driver. To avoid conflict with
* BIOS AER support requires BIOS to yield AER control to OS native driver.
**/
int aer_osc_setup(struct pci_dev *dev)
{
int retval = OSC_METHOD_RUN_SUCCESS;
acpi_status status;
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
struct pci_dev *pdev = dev;
struct pci_bus *parent;
while (!handle) {
if (!pdev || !pdev->bus->parent)
break;
parent = pdev->bus->parent;
if (!parent->self)
/* Parent must be a host bridge */
handle = acpi_get_pci_rootbridge_handle(
pci_domain_nr(parent),
parent->number);
else
handle = DEVICE_ACPI_HANDLE(
&(parent->self->dev));
pdev = parent->self;
}
if (!handle)
return OSC_METHOD_NOT_SUPPORTED;
pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
status = pci_osc_control_set(handle, OSC_PCI_EXPRESS_AER_CONTROL |
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
if (ACPI_FAILURE(status)) {
if (status == AE_SUPPORT)
retval = OSC_METHOD_NOT_SUPPORTED;
else
retval = OSC_METHOD_RUN_FAILURE;
}
return retval;
}
This diff is collapsed.
/*
* drivers/pci/pcie/aer/aerdrv_errprint.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Format error messages and print them to console.
*
* Copyright (C) 2006 Intel Corp.
* Tom Long Nguyen (tom.l.nguyen@intel.com)
* Zhang Yanmin (yanmin.zhang@intel.com)
*
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/suspend.h>
#include "aerdrv.h"
#define AER_AGENT_RECEIVER 0
#define AER_AGENT_REQUESTER 1
#define AER_AGENT_COMPLETER 2
#define AER_AGENT_TRANSMITTER 3
#define AER_AGENT_REQUESTER_MASK (PCI_ERR_UNC_COMP_TIME| \
PCI_ERR_UNC_UNSUP)
#define AER_AGENT_COMPLETER_MASK PCI_ERR_UNC_COMP_ABORT
#define AER_AGENT_TRANSMITTER_MASK(t, e) (e & (PCI_ERR_COR_REP_ROLL| \
((t == AER_CORRECTABLE) ? PCI_ERR_COR_REP_TIMER: 0)))
#define AER_GET_AGENT(t, e) \
((e & AER_AGENT_COMPLETER_MASK) ? AER_AGENT_COMPLETER : \
(e & AER_AGENT_REQUESTER_MASK) ? AER_AGENT_REQUESTER : \
(AER_AGENT_TRANSMITTER_MASK(t, e)) ? AER_AGENT_TRANSMITTER : \
AER_AGENT_RECEIVER)
#define AER_PHYSICAL_LAYER_ERROR_MASK PCI_ERR_COR_RCVR
#define AER_DATA_LINK_LAYER_ERROR_MASK(t, e) \
(PCI_ERR_UNC_DLP| \
PCI_ERR_COR_BAD_TLP| \
PCI_ERR_COR_BAD_DLLP| \
PCI_ERR_COR_REP_ROLL| \
((t == AER_CORRECTABLE) ? \
PCI_ERR_COR_REP_TIMER: 0))
#define AER_PHYSICAL_LAYER_ERROR 0
#define AER_DATA_LINK_LAYER_ERROR 1
#define AER_TRANSACTION_LAYER_ERROR 2
#define AER_GET_LAYER_ERROR(t, e) \
((e & AER_PHYSICAL_LAYER_ERROR_MASK) ? \
AER_PHYSICAL_LAYER_ERROR : \
(e & AER_DATA_LINK_LAYER_ERROR_MASK(t, e)) ? \
AER_DATA_LINK_LAYER_ERROR : \
AER_TRANSACTION_LAYER_ERROR)
/*
* AER error strings
*/
static char* aer_error_severity_string[] = {
"Uncorrected (Non-Fatal)",
"Uncorrected (Fatal)",
"Corrected"
};
static char* aer_error_layer[] = {
"Physical Layer",
"Data Link Layer",
"Transaction Layer"
};
static char* aer_correctable_error_string[] = {
"Receiver Error ", /* Bit Position 0 */
NULL,
NULL,
NULL,
NULL,
NULL,
"Bad TLP ", /* Bit Position 6 */
"Bad DLLP ", /* Bit Position 7 */
"RELAY_NUM Rollover ", /* Bit Position 8 */
NULL,
NULL,
NULL,
"Replay Timer Timeout ", /* Bit Position 12 */
"Advisory Non-Fatal ", /* Bit Position 13 */
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
};
static char* aer_uncorrectable_error_string[] = {
NULL,
NULL,
NULL,
NULL,
"Data Link Protocol ", /* Bit Position 4 */
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
"Poisoned TLP ", /* Bit Position 12 */
"Flow Control Protocol ", /* Bit Position 13 */
"Completion Timeout ", /* Bit Position 14 */
"Completer Abort ", /* Bit Position 15 */
"Unexpected Completion ", /* Bit Position 16 */
"Receiver Overflow ", /* Bit Position 17 */
"Malformed TLP ", /* Bit Position 18 */
"ECRC ", /* Bit Position 19 */
"Unsupported Request ", /* Bit Position 20 */
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
};
static char* aer_agent_string[] = {
"Receiver ID",
"Requester ID",
"Completer ID",
"Transmitter ID"
};
static char * aer_get_error_source_name(int severity,
unsigned int status,
char errmsg_buff[])
{
int i;
char * errmsg = NULL;
for (i = 0; i < 32; i++) {
if (!(status & (1 << i)))
continue;
if (severity == AER_CORRECTABLE)
errmsg = aer_correctable_error_string[i];
else
errmsg = aer_uncorrectable_error_string[i];
if (!errmsg) {
sprintf(errmsg_buff, "Unknown Error Bit %2d ", i);
errmsg = errmsg_buff;
}
break;
}
return errmsg;
}
static DEFINE_SPINLOCK(logbuf_lock);
static char errmsg_buff[100];
void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
{
char * errmsg;
int err_layer, agent;
char * loglevel;
if (info->severity == AER_CORRECTABLE)
loglevel = KERN_WARNING;
else
loglevel = KERN_ERR;
printk("%s+------ PCI-Express Device Error ------+\n", loglevel);
printk("%sError Severity\t\t: %s\n", loglevel,
aer_error_severity_string[info->severity]);
if ( info->status == 0) {
printk("%sPCIE Bus Error type\t: (Unaccessible)\n", loglevel);
printk("%sUnaccessible Received\t: %s\n", loglevel,
info->flags & AER_MULTI_ERROR_VALID_FLAG ?
"Multiple" : "First");
printk("%sUnregistered Agent ID\t: %04x\n", loglevel,
(dev->bus->number << 8) | dev->devfn);
} else {
err_layer = AER_GET_LAYER_ERROR(info->severity, info->status);
printk("%sPCIE Bus Error type\t: %s\n", loglevel,
aer_error_layer[err_layer]);
spin_lock(&logbuf_lock);
errmsg = aer_get_error_source_name(info->severity,
info->status,
errmsg_buff);
printk("%s%s\t: %s\n", loglevel, errmsg,
info->flags & AER_MULTI_ERROR_VALID_FLAG ?
"Multiple" : "First");
spin_unlock(&logbuf_lock);
agent = AER_GET_AGENT(info->severity, info->status);
printk("%s%s\t\t: %04x\n", loglevel,
aer_agent_string[agent],
(dev->bus->number << 8) | dev->devfn);
printk("%sVendorID=%04xh, DeviceID=%04xh,"
" Bus=%02xh, Device=%02xh, Function=%02xh\n",
loglevel,
dev->vendor,
dev->device,
dev->bus->number,
PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
if (info->flags & AER_TLP_HEADER_VALID_FLAG) {
unsigned char *tlp = (unsigned char *) &info->tlp;
printk("%sTLB Header:\n", loglevel);
printk("%s%02x%02x%02x%02x %02x%02x%02x%02x"
" %02x%02x%02x%02x %02x%02x%02x%02x\n",
loglevel,
*(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
*(tlp + 7), *(tlp + 6), *(tlp + 5), *(tlp + 4),
*(tlp + 11), *(tlp + 10), *(tlp + 9),
*(tlp + 8), *(tlp + 15), *(tlp + 14),
*(tlp + 13), *(tlp + 12));
}
}
}
/*
* Copyright (C) 2006 Intel Corp.
* Tom Long Nguyen (tom.l.nguyen@intel.com)
* Zhang Yanmin (yanmin.zhang@intel.com)
*/
#ifndef _AER_H_
#define _AER_H_
#if defined(CONFIG_PCIEAER)
/* pci-e port driver needs this function to enable aer */
extern int pci_enable_pcie_error_reporting(struct pci_dev *dev);
extern int pci_find_aer_capability(struct pci_dev *dev);
extern int pci_disable_pcie_error_reporting(struct pci_dev *dev);
extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
#else
#define pci_enable_pcie_error_reporting(dev) do { } while (0)
#define pci_find_aer_capability(dev) do { } while (0)
#define pci_disable_pcie_error_reporting(dev) do { } while (0)
#define pci_cleanup_aer_uncorrect_error_status(dev) do { } while (0)
#endif
#endif //_AER_H_
......@@ -62,6 +62,12 @@ struct pcie_port_service_driver {
int (*suspend) (struct pcie_device *dev, pm_message_t state);
int (*resume) (struct pcie_device *dev);
/* Service Error Recovery Handler */
struct pci_error_handlers *err_handler;
/* Link Reset Capability - AER service driver specific */
pci_ers_result_t (*reset_link) (struct pci_dev *dev);
const struct pcie_port_service_id *id_table;
struct device_driver driver;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment