Commit 612f9d33 authored by Timur Tabi's avatar Timur Tabi Committed by Paul Mackerras

powerpc: Fix interrupt values for DMA2 in MPC8610 HPCD device tree

For Freescale 8xxx devices that use an MPIC, the interrupt numbers in
the device tree must be 16 greater than the values documented in the
reference manual.  In these chips, the MPIC is wired to use the first
16 numbers for external interrupts, but the documentation numbers
internal interrupts from 0.

In the MPC8610 HPCD device tree, the interrupt properties for the DMA
channels for DMA2 were not the adjusted values.  This fixes that.
Signed-off-by: default avatarTimur Tabi <timur@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent bc45eb89
...@@ -281,7 +281,7 @@ ...@@ -281,7 +281,7 @@
cell-index = <0>; cell-index = <0>;
reg = <0x0 0x80>; reg = <0x0 0x80>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <60 2>; interrupts = <76 2>;
}; };
dma-channel@1 { dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel", compatible = "fsl,mpc8610-dma-channel",
...@@ -289,7 +289,7 @@ ...@@ -289,7 +289,7 @@
cell-index = <1>; cell-index = <1>;
reg = <0x80 0x80>; reg = <0x80 0x80>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <61 2>; interrupts = <77 2>;
}; };
dma-channel@2 { dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel", compatible = "fsl,mpc8610-dma-channel",
...@@ -297,7 +297,7 @@ ...@@ -297,7 +297,7 @@
cell-index = <2>; cell-index = <2>;
reg = <0x100 0x80>; reg = <0x100 0x80>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <62 2>; interrupts = <78 2>;
}; };
dma-channel@3 { dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel", compatible = "fsl,mpc8610-dma-channel",
...@@ -305,7 +305,7 @@ ...@@ -305,7 +305,7 @@
cell-index = <3>; cell-index = <3>;
reg = <0x180 0x80>; reg = <0x180 0x80>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <63 2>; interrupts = <79 2>;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment