[PATCH] remove two obsolete net drivers

  
  The options FMV18X and SK_G16 do depend on the non-available
  CONFIG_OBSOLETE even in kernel 2.4 - IOW, the last time it was able to
  select them was in kernel 2.2 (or even before).
  
  Since it seems noone misses these drivers, this patch removes them.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Documentation/networking/multicast.txt

@@ -47,7 +47,6 @@ ni52		<------------------ Buggy ------------------>
 ni65		YES		YES		YES		Software(#)
 seeq		NO		NO		NO		N/A
 sgiseek		<------------------ Buggy ------------------>
-sk_g16		NO		NO		YES		N/A
 smc-ultra	YES		YES		YES		Hardware
 sunlance	YES		YES		YES		Hardware
 tulip		YES		YES		YES		Hardware

Documentation/networking/net-modules.txt

@@ -284,9 +284,6 @@ ppp.c:
 seeq8005.c: *Not modularized*
 	(Probes ports: 0x300, 0x320, 0x340, 0x360)
 
-sk_g16.c: *Not modularized*
-	(Probes ports: 0x100, 0x180, 0x208, 0x220m 0x288, 0x320, 0x328, 0x390)
-
 skeleton.c: *Skeleton*
 
 slhc.c:

drivers/net/Kconfig

@@ -989,21 +989,6 @@ config EEXPRESS_PRO
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called eepro.
 
-config FMV18X
-	tristate "FMV-181/182/183/184 support (OBSOLETE)"
-	depends on NET_ISA && OBSOLETE
-	---help---
-	  If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card,
-	  say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  If you use an FMV-183 or FMV-184 and it is not working, you may need
-	  to disable Plug & Play mode of the card.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
-	  will be called fmv18x.
-
 config HPLAN_PLUS
 	tristate "HP PCLAN+ (27247B and 27252A) support"
 	depends on NET_ISA
@@ -1092,14 +1077,6 @@ config SEEQ8005
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called seeq8005.
 
-config SK_G16
-	tristate "SK_G16 support (OBSOLETE)"
-	depends on NET_ISA && OBSOLETE
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
 config SKMC
 	tristate "SKnet MCA support"
 	depends on NET_ETHERNET && MCA && BROKEN

drivers/net/Makefile

@@ -73,7 +73,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
 obj-$(CONFIG_APNE) += apne.o 8390.o
 obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
 obj-$(CONFIG_SHAPER) += shaper.o
-obj-$(CONFIG_SK_G16) += sk_g16.o
 obj-$(CONFIG_HP100) += hp100.o
 obj-$(CONFIG_SMC9194) += smc9194.o
 obj-$(CONFIG_FEC) += fec.o
@@ -121,7 +120,6 @@ obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
 obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_FMV18X) += fmv18x.o
 obj-$(CONFIG_EL1) += 3c501.o
 obj-$(CONFIG_EL16) += 3c507.o
 obj-$(CONFIG_ELMC) += 3c523.o

drivers/net/Space.c

@@ -210,9 +210,6 @@ static struct devprobe2 isa_probes[] __initdata = {
 #ifdef CONFIG_AT1700
 	{at1700_probe, 0},
 #endif
-#ifdef CONFIG_FMV18X		/* Fujitsu FMV-181/182 */
-	{fmv18x_probe, 0},
-#endif
 #ifdef CONFIG_ETH16I
 	{eth16i_probe, 0},	/* ICL EtherTeam 16i/32 */
 #endif
@@ -243,9 +240,6 @@ static struct devprobe2 isa_probes[] __initdata = {
 #ifdef CONFIG_ELPLUS		/* 3c505 */
 	{elplus_probe, 0},
 #endif
-#ifdef CONFIG_SK_G16
-	{SK_init, 0},
-#endif
 #ifdef CONFIG_NI5010
 	{ni5010_probe, 0},
 #endif

drivers/net/sk_g16.h

-/*-
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * Module         : sk_g16.h
- * Version        : $Revision$  
- *
- * Author         : M.Hipp (mhipp@student.uni-tuebingen.de)
- * changes by     : Patrick J.D. Weichmann
- *
- * Date Created   : 94/05/25
- *
- * Description    : In here are all necessary definitions of  
- *                  the am7990 (LANCE) chip used for writing a
- *                  network device driver which uses this chip 
- *
- * $Log$
--*/
-
-#ifndef SK_G16_H
-
-#define SK_G16_H
-
-
-/*
- * 	Control and Status Register 0 (CSR0) bit definitions
- *
- * (R=Readable) (W=Writeable) (S=Set on write) (C-Clear on write)
- *
- */
-
-#define CSR0_ERR	0x8000	/* Error summary (R) */
-#define CSR0_BABL	0x4000	/* Babble transmitter timeout error (RC) */
-#define CSR0_CERR	0x2000	/* Collision Error (RC) */
-#define CSR0_MISS	0x1000	/* Missed packet (RC) */
-#define CSR0_MERR	0x0800	/* Memory Error  (RC) */ 
-#define CSR0_RINT	0x0400	/* Receiver Interrupt (RC) */
-#define CSR0_TINT       0x0200	/* Transmit Interrupt (RC) */ 
-#define CSR0_IDON	0x0100	/* Initialization Done (RC) */
-#define CSR0_INTR	0x0080	/* Interrupt Flag (R) */
-#define CSR0_INEA	0x0040	/* Interrupt Enable (RW) */
-#define CSR0_RXON	0x0020	/* Receiver on (R) */
-#define CSR0_TXON	0x0010  /* Transmitter on (R) */
-#define CSR0_TDMD	0x0008	/* Transmit Demand (RS) */
-#define CSR0_STOP	0x0004 	/* Stop (RS) */
-#define CSR0_STRT	0x0002	/* Start (RS) */
-#define CSR0_INIT	0x0001	/* Initialize (RS) */
-
-#define CSR0_CLRALL     0x7f00  /* mask for all clearable bits */
-
-/*
- *    Control and Status Register 3 (CSR3) bit definitions
- *
- */
-
-#define CSR3_BSWAP	0x0004	/* Byte Swap (RW) */
-#define CSR3_ACON	0x0002  /* ALE Control (RW) */
-#define CSR3_BCON	0x0001	/* Byte Control (RW) */
-
-/*
- *	Initialization Block Mode operation Bit Definitions.
- */
-
-#define MODE_PROM	0x8000	/* Promiscuous Mode */
-#define MODE_INTL	0x0040  /* Internal Loopback */
-#define MODE_DRTY	0x0020  /* Disable Retry */ 
-#define MODE_COLL	0x0010	/* Force Collision */
-#define MODE_DTCR	0x0008	/* Disable Transmit CRC) */
-#define MODE_LOOP	0x0004	/* Loopback */
-#define MODE_DTX	0x0002	/* Disable the Transmitter */ 
-#define MODE_DRX	0x0001  /* Disable the Receiver */
-
-#define MODE_NORMAL 	0x0000  /* Normal operation mode */
-
-/*
- * 	Receive message descriptor status bit definitions.
- */
-
-#define RX_OWN		0x80	/* Owner bit 0 = host, 1 = lance */
-#define RX_ERR		0x40	/* Error Summary */
-#define RX_FRAM		0x20	/* Framing Error */
-#define RX_OFLO		0x10	/* Overflow Error */
-#define RX_CRC		0x08	/* CRC Error */ 
-#define RX_BUFF		0x04	/* Buffer Error */
-#define RX_STP		0x02	/* Start of Packet */
-#define RX_ENP		0x01	/* End of Packet */
-
-
-/*
- *	Transmit message descriptor status bit definitions.
- */
-
-#define TX_OWN		0x80	/* Owner bit 0 = host, 1 = lance */
-#define TX_ERR		0x40    /* Error Summary */
-#define TX_MORE		0x10	/* More the 1 retry needed to Xmit */
-#define TX_ONE		0x08	/* One retry needed to Xmit */
-#define TX_DEF		0x04	/* Deferred */
-#define TX_STP 		0x02	/* Start of Packet */
-#define TX_ENP		0x01	/* End of Packet */
-
-/*
- *      Transmit status (2) (valid if TX_ERR == 1)
- */
-
-#define TX_BUFF 	0x8000  /* Buffering error (no ENP) */
-#define TX_UFLO 	0x4000  /* Underflow (late memory) */
-#define TX_LCOL 	0x1000  /* Late collision */
-#define TX_LCAR 	0x0400  /* Loss of Carrier */
-#define TX_RTRY 	0x0200  /* Failed after 16 retransmissions  */
-#define TX_TDR          0x003f  /* Time-domain-reflectometer-value */
-
-
-/* 
- * Structures used for Communication with the LANCE 
- */
-
-/* LANCE Initialize Block */
-
-struct init_block 
-{
-  unsigned short mode;     /* Mode Register */
-  unsigned char  paddr[6]; /* Physical Address (MAC) */
-  unsigned char  laddr[8]; /* Logical Filter Address (not used) */
-  unsigned int   rdrp;     /* Receive Descriptor Ring pointer */
-  unsigned int   tdrp;     /* Transmit Descriptor Ring pointer */
-};
-
-
-/* Receive Message Descriptor Entry */
-
-struct rmd 
-{ 
-  union
-  {
-    unsigned long buffer;     /* Address of buffer */
-    struct 
-    {
-      unsigned char unused[3]; 
-      unsigned volatile char status;   /* Status Bits */
-    } s;
-  } u;
-  volatile short blen;        /* Buffer Length (two's complement) */
-  unsigned short mlen;        /* Message Byte Count */
-};
-
-
-/* Transmit Message Descriptor Entry */
-
-struct tmd   
-{
-  union 
-  {
-    unsigned long  buffer;    /* Address of buffer */
-    struct 
-    {
-      unsigned char unused[3];
-      unsigned volatile char status;   /* Status Bits */
-    } s;
-  } u;
-  unsigned short blen;             /* Buffer Length (two's complement) */
-  unsigned volatile short status2; /* Error Status Bits */
-};
-
-#endif /* End of SK_G16_H */