powerpc/mpc8313erdb: Add power management to the device tree.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8313erdb.dts

@@ -109,6 +109,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x03000000>;
+			ranges;
+
 			i2c@3000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -124,6 +131,19 @@
 				};
 			};
 
+			crypto@30000 {
+				compatible = "fsl,sec2.2", "fsl,sec2.1",
+				             "fsl,sec2.0";
+				reg = <0x30000 0x10000>;
+				interrupts = <11 0x8>;
+				interrupt-parent = <&ipic>;
+				fsl,num-channels = <1>;
+				fsl,channel-fifo-len = <24>;
+				fsl,exec-units-mask = <0x4c>;
+				fsl,descriptor-types-mask = <0x0122003f>;
+			};
+		};
+
 		i2c@3100 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -188,8 +208,26 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
 			phy_type = "utmi_wide";
+			sleep = <&pmc 0x00300000>;
 		};
 
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			sleep = <&pmc 0x20000000>;
+			ranges;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar", "simple-bus";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 0x8 36 0x8 35 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = < &phy1 >;
+			fsl,magic-packet;
+
 			mdio@24520 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -208,17 +246,6 @@
 					device_type = "ethernet-phy";
 				};
 			};
-
-		enet0: ethernet@24000 {
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 0x8 36 0x8 35 0x8>;
-			interrupt-parent = <&ipic>;
-			phy-handle = < &phy1 >;
 		};
 
 		enet1: ethernet@25000 {
@@ -231,6 +258,8 @@
 			interrupts = <34 0x8 33 0x8 32 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy4 >;
+			sleep = <&pmc 0x10000000>;
+			fsl,magic-packet;
 		};
 
 		serial0: serial@4500 {
@@ -253,17 +282,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <1>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x4c>;
-			fsl,descriptor-types-mask = <0x0122003f>;
-		};
-
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
@@ -277,13 +295,49 @@
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 8>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+			/* Remove this (or change to "okay") if you have
+			 * a REVA3 or later board, if you apply one of the
+			 * workarounds listed in section 8.5 of the board
+			 * manual, or if you are adapting this device tree
+			 * to a different board.
+			 */
+			status = "fail";
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 8 79 8 85 8 73 8>;
+			interrupt-parent = <&ipic>;
+		};
 	};
 
+	sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00010000>;
+		ranges;
+
 		pci0: pci@e0008500 {
 			cell-index = <1>;
 			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
-
 					/* IDSEL 0x0E -mini PCI */
 					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
 					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
@@ -309,4 +363,51 @@
 			compatible = "fsl,mpc8349-pci";
 			device_type = "pci";
 		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0xe00082a8 4>;
+			ranges = <0 0xe0008100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <0>;
+			};
+
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x80 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <1>;
+			};
+
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x100 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <2>;
+			};
+
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <3>;
+			};
+		};
+	};
 };