Skip to content

L
linux-davinci
Commit 57436612 authored by Scott Wood's avatar Scott Wood Committed by Kumar Gala
Browse files
Options

powerpc/mpc8313erdb: Add power management to the device tree. 

Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent d49747bd
Hide whitespace changes
Inline Side-by-side
Showing with 171 additions and 70 deletions
arch/powerpc/boot/dts/mpc8313erdb.dts
View file @ 57436612
...@@ -109,18 +109,38 @@ ...@@ -109,18 +109,38 @@
reg = <0x200 0x100>; reg = <0x200 0x100>;
}; };
i2c@3000 { sleep-nexus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <1>;
cell-index = <0>; compatible = "simple-bus";
compatible = "fsl-i2c"; sleep = <&pmc 0x03000000>;
reg = <0x3000 0x100>; ranges;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>; i2c@3000 {
dfsrr; #address-cells = <1>;
rtc@68 { #size-cells = <0>;
compatible = "dallas,ds1339"; cell-index = <0>;
reg = <0x68>; compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
crypto@30000 {
compatible = "fsl,sec2.2", "fsl,sec2.1",
"fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
fsl,num-channels = <1>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
}; };
}; };
...@@ -188,37 +208,44 @@ ...@@ -188,37 +208,44 @@
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
interrupts = <38 0x8>; interrupts = <38 0x8>;
phy_type = "utmi_wide"; phy_type = "utmi_wide";
sleep = <&pmc 0x00300000>;
}; };
mdio@24520 { enet0: ethernet@24000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <1>;
compatible = "fsl,gianfar-mdio"; sleep = <&pmc 0x20000000>;
reg = <0x24520 0x20>; ranges;
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x4>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar", "simple-bus";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 0x8 36 0x8 35 0x8>; interrupts = <37 0x8 36 0x8 35 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
phy-handle = < &phy1 >; phy-handle = < &phy1 >;
fsl,magic-packet;
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x4>;
device_type = "ethernet-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
...@@ -231,6 +258,8 @@ ...@@ -231,6 +258,8 @@
interrupts = <34 0x8 33 0x8 32 0x8>; interrupts = <34 0x8 33 0x8 32 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
phy-handle = < &phy4 >; phy-handle = < &phy4 >;
sleep = <&pmc 0x10000000>;
fsl,magic-packet;
}; };
serial0: serial@4500 { serial0: serial@4500 {
...@@ -253,17 +282,6 @@ ...@@ -253,17 +282,6 @@
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
}; };
crypto@30000 {
compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
fsl,num-channels = <1>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
};
/* IPIC /* IPIC
* interrupts cell = <intr #, sense> * interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines: * sense values match linux IORESOURCE_IRQ_* defines:
...@@ -277,36 +295,119 @@ ...@@ -277,36 +295,119 @@
reg = <0x700 0x100>; reg = <0x700 0x100>;
device_type = "ipic"; device_type = "ipic";
}; };
pmc: power@b00 {
compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 8>;
interrupt-parent = <&ipic>;
fsl,mpc8313-wakeup-timer = <&gtm1>;
/* Remove this (or change to "okay") if you have
* a REVA3 or later board, if you apply one of the
* workarounds listed in section 8.5 of the board
* manual, or if you are adapting this device tree
* to a different board.
*/
status = "fail";
};
gtm1: timer@500 {
compatible = "fsl,mpc8313-gtm", "fsl,gtm";
reg = <0x500 0x100>;
interrupts = <90 8 78 8 84 8 72 8>;
interrupt-parent = <&ipic>;
};
timer@600 {
compatible = "fsl,mpc8313-gtm", "fsl,gtm";
reg = <0x600 0x100>;
interrupts = <91 8 79 8 85 8 73 8>;
interrupt-parent = <&ipic>;
};
}; };
pci0: pci@e0008500 { sleep-nexus {
cell-index = <1>; #address-cells = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; #size-cells = <1>;
interrupt-map = < compatible = "simple-bus";
sleep = <&pmc 0x00010000>;
/* IDSEL 0x0E -mini PCI */ ranges;
0x7000 0x0 0x0 0x1 &ipic 18 0x8
0x7000 0x0 0x0 0x2 &ipic 18 0x8 pci0: pci@e0008500 {
0x7000 0x0 0x0 0x3 &ipic 18 0x8 cell-index = <1>;
0x7000 0x0 0x0 0x4 &ipic 18 0x8 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0F - PCI slot */ /* IDSEL 0x0E -mini PCI */
0x7800 0x0 0x0 0x1 &ipic 17 0x8 0x7000 0x0 0x0 0x1 &ipic 18 0x8
0x7800 0x0 0x0 0x2 &ipic 18 0x8 0x7000 0x0 0x0 0x2 &ipic 18 0x8
0x7800 0x0 0x0 0x3 &ipic 17 0x8 0x7000 0x0 0x0 0x3 &ipic 18 0x8
0x7800 0x0 0x0 0x4 &ipic 18 0x8>; 0x7000 0x0 0x0 0x4 &ipic 18 0x8
interrupt-parent = <&ipic>;
interrupts = <66 0x8>; /* IDSEL 0x0F - PCI slot */
bus-range = <0x0 0x0>; 0x7800 0x0 0x0 0x1 &ipic 17 0x8
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x7800 0x0 0x0 0x2 &ipic 18 0x8
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x7800 0x0 0x0 0x3 &ipic 17 0x8
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
clock-frequency = <66666666>; interrupt-parent = <&ipic>;
#interrupt-cells = <1>; interrupts = <66 0x8>;
#size-cells = <2>; bus-range = <0x0 0x0>;
#address-cells = <3>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
reg = <0xe0008500 0x100>; 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
compatible = "fsl,mpc8349-pci"; 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
device_type = "pci"; clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
reg = <0xe00082a8 4>;
ranges = <0 0xe0008100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
dma-channel@0 {
compatible = "fsl,mpc8313-dma-channel",
"fsl,elo-dma-channel";
reg = <0 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
};
dma-channel@80 {
compatible = "fsl,mpc8313-dma-channel",
"fsl,elo-dma-channel";
reg = <0x80 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <1>;
};
dma-channel@100 {
compatible = "fsl,mpc8313-dma-channel",
"fsl,elo-dma-channel";
reg = <0x100 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <2>;
};
dma-channel@180 {
compatible = "fsl,mpc8313-dma-channel",
"fsl,elo-dma-channel";
reg = <0x180 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <3>;
};
};
}; };
}; };
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment