Commit 4fe8a0f4 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6

parents 529980c8 344a0761
......@@ -339,12 +339,6 @@ config IA64_PALINFO
To use this option, you have to ensure that the "/proc file system
support" (CONFIG_PROC_FS) is enabled, too.
config ACPI_DEALLOCATE_IRQ
bool
depends on ACPI
depends on IOSAPIC && EXPERIMENTAL
default y
source "drivers/firmware/Kconfig"
source "fs/Kconfig.binfmt"
......
......@@ -111,7 +111,6 @@ CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
CONFIG_ACPI_DEALLOCATE_IRQ=y
#
# Firmware Drivers
......
......@@ -109,7 +109,6 @@ CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
CONFIG_ACPI_DEALLOCATE_IRQ=y
#
# Firmware Drivers
......
......@@ -109,7 +109,6 @@ CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
CONFIG_ACPI_DEALLOCATE_IRQ=y
#
# Firmware Drivers
......
......@@ -99,7 +99,6 @@ CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
CONFIG_ACPI_DEALLOCATE_IRQ=y
#
# Firmware Drivers
......@@ -335,7 +334,7 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_FC=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
......
......@@ -583,14 +583,12 @@ int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
EXPORT_SYMBOL(acpi_register_gsi);
#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
void acpi_unregister_gsi(u32 gsi)
{
iosapic_unregister_intr(gsi);
}
EXPORT_SYMBOL(acpi_unregister_gsi);
#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */
static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size)
{
......
......@@ -204,9 +204,6 @@ GLOBAL_ENTRY(ia64_switch_to)
(p6) br.cond.dpnt .map
;;
.done:
(p6) ssm psr.ic // if we had to map, reenable the psr.ic bit FIRST!!!
;;
(p6) srlz.d
ld8 sp=[r21] // load kernel stack pointer of new task
mov IA64_KR(CURRENT)=in0 // update "current" application register
mov r8=r13 // return pointer to previously running task
......@@ -234,6 +231,9 @@ GLOBAL_ENTRY(ia64_switch_to)
mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped...
;;
itr.d dtr[r25]=r23 // wire in new mapping...
ssm psr.ic // reenable the psr.ic bit
;;
srlz.d
br.cond.sptk .done
END(ia64_switch_to)
......
......@@ -782,7 +782,6 @@ again:
return vector;
}
#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
void
iosapic_unregister_intr (unsigned int gsi)
{
......@@ -865,7 +864,6 @@ iosapic_unregister_intr (unsigned int gsi)
spin_unlock(&iosapic_lock);
spin_unlock_irqrestore(&idesc->lock, flags);
}
#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */
/*
* ACPI calls this when it finds an entry for a platform interrupt.
......
......@@ -625,8 +625,11 @@ EK(.ex_handler, (p17) st8 [dst1]=r39,8); \
clrrrb
;;
alloc saved_pfs_stack=ar.pfs,3,3,3,0
cmp.lt p8,p0=A,r0
sub B = dst0, saved_in0 // how many byte copied so far
;;
(p8) mov A = 0; // A shouldn't be negative, cap it
;;
sub C = A, B
sub D = saved_in2, A
;;
......
......@@ -230,9 +230,6 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
return;
}
if (ia64_done_with_exception(regs))
return;
/*
* Since we have no vma's for region 5, we might get here even if the address is
* valid, due to the VHPT walker inserting a non present translation that becomes
......@@ -243,6 +240,9 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
if (REGION_NUMBER(address) == 5 && mapped_kernel_page_is_present(address))
return;
if (ia64_done_with_exception(regs))
return;
/*
* Oops. The kernel tried to access some bad page. We'll have to terminate things
* with extreme prejudice.
......
......@@ -498,13 +498,11 @@ pcibios_enable_device (struct pci_dev *dev, int mask)
return acpi_pci_irq_enable(dev);
}
#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
void
pcibios_disable_device (struct pci_dev *dev)
{
acpi_pci_irq_disable(dev);
}
#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */
void
pcibios_align_resource (void *data, struct resource *res,
......
......@@ -56,7 +56,7 @@
DEFINE_PER_CPU(struct pda_s, pda_percpu);
#define MAX_PHYS_MEMORY (1UL << 49) /* 1 TB */
#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */
lboard_t *root_lboard[MAX_COMPACT_NODES];
......
......@@ -885,6 +885,10 @@ xpc_init(void)
pid_t pid;
if (!ia64_platform_is("sn2")) {
return -ENODEV;
}
/*
* xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
* both a partition's reserved page and its XPC variables. Its size was
......
......@@ -636,6 +636,10 @@ xpnet_init(void)
int result = -ENOMEM;
if (!ia64_platform_is("sn2")) {
return -ENODEV;
}
dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
/*
......
......@@ -80,12 +80,9 @@ extern int iosapic_remove (unsigned int gsi_base);
#endif /* CONFIG_HOTPLUG */
extern int gsi_to_vector (unsigned int gsi);
extern int gsi_to_irq (unsigned int gsi);
extern void iosapic_enable_intr (unsigned int vector);
extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
unsigned long trigger);
#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
extern void iosapic_unregister_intr (unsigned int irq);
#endif
extern void __init iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
unsigned long polarity,
unsigned long trigger);
......@@ -97,7 +94,6 @@ extern int __init iosapic_register_platform_intr (u32 int_type,
unsigned long trigger);
extern unsigned int iosapic_version (char __iomem *addr);
extern void iosapic_pci_fixup (int);
#ifdef CONFIG_NUMA
extern void __devinit map_iosapic_to_node (unsigned int, int);
#endif
......
......@@ -35,8 +35,4 @@ extern void disable_irq_nosync (unsigned int);
extern void enable_irq (unsigned int);
extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
struct irqaction;
struct pt_regs;
int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
#endif /* _ASM_IA64_IRQ_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment