Skip to content

L
linux-davinci
Commit 4e1d8807 authored by Ramesh Gupta G's avatar Ramesh Gupta G Committed by Hari Kanigeri
Browse files
Options

OMAP4 Syslink Release Notes 

This patch provides OMAP4 Syslink release notes for
L24.0.9 release.
Signed-off-by: default avatarRamesh Gupta G <grgupta@ti.com>
Signed-off-by: default avatarSuman Anna <s-anna@ti.com>
parent fac53ad0
Hide whitespace changes
Inline Side-by-side
Showing with 105 additions and 20 deletions
TI_OMAP4_Syslink_Release_Notes_L24.x.txt 100644 → 100755
View file @ 4e1d8807
......@@ -3,7 +3,7 @@ OMAP4 Syslink List Handoff
================================================================================
Author : Ramesh Gupta G / Suman Anna
Date : June 1 2009
Date : June 30 2009
===========
Summary:
......@@ -60,7 +60,7 @@ contact TI counter part.
=======
Setup:
=======
Virtio : VPOM4430_1.08a + patch1
Virtio : VPOM4430_1.09a + patch3
CCS: Version 3.3 with VPOM simulator. For more information on CCS availability
please contact TI.
CCSv4 with VPOM simulator is also supported.
......@@ -106,7 +106,7 @@ From the Kernel sources run below commands.
<M> Syslink Procmgr
<M> Proc 4430
Device Drivers --><M> DSP Bridge driver-->
[*] DSP Bridge Debug Support
[M] DSP Bridge Debug Support
Select DSP Bridge Debug Support option as above.
7. Save Configuration
......@@ -124,7 +124,10 @@ From the Kernel sources run below commands.
13. Run below command once the kernel is built.
14. Make CROSS_COMPILE=arm-none-linux-gnueabi- modules
14. Make CROSS_COMPILE=arm-none-linux-gnueabi- modules. This command
is applicable only if we select the required drivers as modules.
if all the drivers are selected as part of the kernel steps
from 14 to 23 can be ignored.
15. Bridgedriver module (bridgedriver.ko) is built under folder
drivers/dsp/bridge/ dspbridge module(dspbridge.ko) is built
......@@ -226,12 +229,19 @@ Build the syslink samples by running below commands.
Run make command as below.
2. make PREFIX=<path to syslink folder> TGTROOT=<path to syslink folder> clean
2. make PREFIX=<path to syslink folder> TGTROOT=<path to syslink folder>
KRNLSRC=<kernel sources > clean
3. make PREFIX=<path to syslink folder> TGTROOT=<path to syslink folder>
KRNLSRC=<kernel sources >
4. The sample .out files are build in the respective source directories
underneath syslink/samples folder.
5. The kernel sample procmgr_app.ko is built under
syslink/samples/proc_sample/krnl
6. make sure to build the samples from the same session from which the
kernel is built or export ARCH and PATH variables as mentioned
in above in kernel building.
========================================
Building Tesla images and Ducati samples
......@@ -255,7 +265,10 @@ Running Tesla Samples
2. Once kernel is booted, cd into the folder where all the binaries are
placed.
3. install all the drivers in the sequence as below
3. install all the drivers in the sequence as below, this step is
required only if the drivers are build as modules,
if all the drivers are build as part of the kernel one can
ignore steps 3 and 4
insmod omap_notify.ko
......@@ -339,7 +352,10 @@ Running Syslink Samples
2. Once kernel is booted, cd into the folder where all the binaries are
placed.
3. install all the drivers in the sequence as below
3. install all the drivers in the sequence as below, this step is
required only if the drivers are build as modules,
if all the drivers are build as part of the kernel one can
ignore steps 3 and 4
insmod omap_notify.ko
......@@ -393,7 +409,7 @@ Remove the IVAHD-iCONT1, IVAHD-iCONT2, and Modena.
The System Configuration must have only Tesla and Duati-ARM-M3-1, Ducati-ARM-M3-2
-------------------------------------------------------------------------------
Two baseimages Bios6Boot.xm3 and Bios6Boot_Core1.xm3 can be used to validate
Two baseimages Bios6Boot.xem3 and Bios6Boot_Core1.xem3 can be used to validate
the BIOS6 boot validation on each of the cores respectively.
Please contact TI representative for these images.
......@@ -406,7 +422,10 @@ to boot the Core1 as well.
2. Break the platform by typing 'y' in the Virtio Console after the bash
shell prompt appears.
3. install below drivers in below sequence.
3. install all the drivers in the sequence as below, this step is
required only if the drivers are build as modules,
if all the drivers are build as part of the kernel one can
ignore this step
insmod omap_notify.ko
......@@ -418,7 +437,6 @@ to boot the Core1 as well.
4. The syslink_proc4430 driver programs MMU and
updates page table entries.
5. Break the Virtio by typing y in console.
6. Open CCS and select Ducati core.
......@@ -426,9 +444,10 @@ to boot the Core1 as well.
7. Load the base image into Ducati core0.
8. In Virtio design , browse to
VPOM4430->SDP->OMAP4430-> InitValue_DUCATI_SYS_1. Right click and open.
Right click on Signal (InitValue) and select Send Signal To Platform.
VPOM4430->SDP->OMAP4430-> InitValue_DUCATI_SYS_1.
Right click and open.
Right click on Signal (InitValue) and select
Send Signal To Platform.
Send 1 and press OK. This resets the core.
9. Press F11 once to have the Reset release become effective.
......@@ -440,7 +459,9 @@ Running Notify ping sample on Ducati:
-------------------------------------
1. Boot Vartio as usual.
2. Follow the same steps as above install required drivers (step 3
above).
above), this step is required only if the drivers
are build as modules, if all the drivers are build
as part of the kernel one can ignore this step
3. create nodes for ipcnotify and notifyducatidrv accordinngly.
e.g: mknod /dev/ipcnotify c 232 0
mknod /dev/notifyducatidrv c 234 0
......@@ -453,7 +474,7 @@ Running Notify ping sample on Ducati:
7. Open CCS and select Ducati-ARM-M3-1 core.
6. Load ducati image (notifyxfer_bios6.xm3) image.
6. Load ducati image (notifyxfer_bios6.xem3) image.
7. Open source file notifyxfer_bios6.c file and add some breakpoints
in the main function.
......@@ -468,6 +489,61 @@ Running Notify ping sample on Ducati:
10. The Notifyping sample running on the Chiron shows event messages
and call back function messages.
Loading ducati images using the userspace loader:
------------------------------------------------
1. On successful ducati sample build user space binary loader
ducati_load.out is build underi folder
syslink/samples/samples/procmgr/ducati_load/
2. One can load the ducati image on to SYSM3 or APPM3 using the
userspace binary loader as below.
./ducati_load.out <image_name>
3. on successful load the loader displays the entry point for
the image at the end.
------snip----
loaded_program: 0xea19
Completed Loading Image ..... notifyxfer_bios6.xem3
entry_point is 0xea19
Hit any key to terminate cexec.
--------------
4. Due to Virtio issues we cannot start SYSM3/APPM3 from the
MPU side, one has to use CCS for SYSM3/APPM3 start by
following below step.
5. Break Virtio and open CCS, Select the processor on which
image is loaded.
6. Open the PC registers.
7. Set the PC value to the entry point displayed from the loading
step.
8. Run couple of times step run.
9. Run the Processor.
loading images on both SYSM3/APPM3 processors
---------------------------------------------
Follow below procedure to load images on both SYSM3/APPM3 using
user space loader
1. SYSM3 should be reached main() before loading the APPM3 image.
2. SYSM3 should be in running state to load APPM3 from MPU using
user space loader. Otherwise MPU will not respond.
3. Because of the above reasons, one need to introduce a continuos
while loop in both the SYSM3/APPM3 programs immediately in the main()
function at the first place. e.g:
while(flag)
;
4. Load the SYSM3 image using the loader, set the PC using CCS and tun the
SYSM3 processor. Now SYSM3 executing the while(flag) loop.
5. Load the APPM3 using the loader, set the PC using the CCS and run the
APPM3 processor, now the APPM3 is executing the while(flag) loop.
6. Stop APPM3 processor.
7. Stop SYSM3 processor.
8. Bring SYSM3 out of while loop by changing the variable flag to 0 on the
fly.
9. Bring APP3 out of while loop by changing the variable flag to 0 on the
fly.
10. Run SYSM3 and Run APPM3.
================================================================================
Highlights / Important Notes
================================================================================
......@@ -477,7 +553,6 @@ Tesla Bridge
==============
Features Introduced
--------------------------
- All modules now can be built alng with the Kernel.
- Fixed checkpatch errors and warnings for all modules under syslink.
- Dynamic Loading Support has been added.
- Bridge Trace Support has been added.
......@@ -487,7 +562,12 @@ Features Introduced
==============
Syslink
==============
- First version of Syslink IPC code.
- RCM server and client works on Chiron, Ducati SYSM3 and APPM3.
- Added load support by Proc manager.
- All modules can be built along with the Kernel.
- All modules are working as expected.
- Userspace binary image loader utility is implemented for loading images on
Ducati.
Ducati Bridge
==============
......@@ -508,6 +588,8 @@ Important Notes
set bootargs root=/dev/ram0 rw mem=54M console=ttyS0,115200n8
initrd=0x81600000,20M ramdisk_size=20480
- One need to have CCS to start the Ducati processors as the Virtio doesn't have
the PRCM support to reset Ducati processors.
- Code Composer Studio is required to write the Start DSP Address to the
PC register
* CCS_v3.3_SR9_79.exe or CCS_v3.3_SR10_80.exe or CCS_v3.3_SR11
......@@ -526,9 +608,7 @@ Important Notes
==================================
Issues Resolved
==================================
- Due to timing issues some of the static samples were not
working properly. This issue got fixed. Please refer
TI internal tracking id:OMAPS00198805
- NONE
==================================
Known Issues
......@@ -539,3 +619,8 @@ Known Issues
is not backward compatible with Virtio versions < 1.06a.
3. Notipy ping sample some times not working because of timing issues.
Need to have break points in Ducati side.
4. CCS is required to start Ducati processors (SYSM3/APPM3), as the
current Virtio doesn't have the PRCM support to reset Ducati Processors.
5. ping sample is not working in dynamic mode in Tesla due to dependant
library issue this is been tracked by internal tracking number id:
OMAPS00202802
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment