siimage: convert to use ->host_priv

While at it:

* Reserve PCI BAR 5 in siimage_init_one() and remove no longer needed
  setup_mmio_siimage().
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 96776f3b
......@@ -127,9 +127,10 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
{
struct ide_host *host = pci_get_drvdata(dev);
u8 tmp = 0;
if (pci_get_drvdata(dev))
if (host->host_priv)
tmp = readb((void __iomem *)addr);
else
pci_read_config_byte(dev, addr, &tmp);
......@@ -139,9 +140,10 @@ static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
{
struct ide_host *host = pci_get_drvdata(dev);
u16 tmp = 0;
if (pci_get_drvdata(dev))
if (host->host_priv)
tmp = readw((void __iomem *)addr);
else
pci_read_config_word(dev, addr, &tmp);
......@@ -151,7 +153,9 @@ static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
{
if (pci_get_drvdata(dev))
struct ide_host *host = pci_get_drvdata(dev);
if (host->host_priv)
writeb(val, (void __iomem *)addr);
else
pci_write_config_byte(dev, addr, val);
......@@ -159,7 +163,9 @@ static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
{
if (pci_get_drvdata(dev))
struct ide_host *host = pci_get_drvdata(dev);
if (host->host_priv)
writew(val, (void __iomem *)addr);
else
pci_write_config_word(dev, addr, val);
......@@ -167,7 +173,9 @@ static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
{
if (pci_get_drvdata(dev))
struct ide_host *host = pci_get_drvdata(dev);
if (host->host_priv)
writel(val, (void __iomem *)addr);
else
pci_write_config_dword(dev, addr, val);
......@@ -444,44 +452,6 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
}
}
/**
* setup_mmio_siimage - switch controller into MMIO mode
* @dev: PCI device we are configuring
* @name: device name
*
* Attempt to put the device into MMIO mode. There are some slight
* complications here with certain systems where the MMIO BAR isn't
* mapped, so we have to be sure that we can fall back to I/O.
*/
static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name)
{
resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
void __iomem *ioaddr;
/*
* Drop back to PIO if we can't map the MMIO. Some systems
* seem to get terminally confused in the PCI spaces.
*/
if (!request_mem_region(bar5, barsize, name)) {
printk(KERN_WARNING "siimage: IDE controller MMIO ports not "
"available.\n");
return 0;
}
ioaddr = ioremap(bar5, barsize);
if (ioaddr == NULL) {
release_mem_region(bar5, barsize);
return 0;
}
pci_set_master(dev);
pci_set_drvdata(dev, (void *) ioaddr);
return 1;
}
/**
* init_chipset_siimage - set up an SI device
* @dev: PCI device
......@@ -494,17 +464,15 @@ static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name)
static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
const char *name)
{
struct ide_host *host = pci_get_drvdata(dev);
void __iomem *ioaddr = host->host_priv;
unsigned long base, scsc_addr;
void __iomem *ioaddr = NULL;
u8 rev = dev->revision, tmp, BA5_EN;
u8 rev = dev->revision, tmp;
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
pci_read_config_byte(dev, 0x8A, &BA5_EN);
if ((BA5_EN & 0x01) || pci_resource_start(dev, 5))
if (setup_mmio_siimage(dev, name))
ioaddr = pci_get_drvdata(dev);
if (ioaddr)
pci_set_master(dev);
base = (unsigned long)ioaddr;
......@@ -592,7 +560,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
void *addr = pci_get_drvdata(dev);
struct ide_host *host = pci_get_drvdata(dev);
void *addr = host->host_priv;
u8 ch = hwif->channel;
struct ide_io_ports *io_ports = &hwif->io_ports;
unsigned long base;
......@@ -691,16 +660,15 @@ static void __devinit sil_quirkproc(ide_drive_t *drive)
static void __devinit init_iops_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
hwif->hwif_data = NULL;
/* Pessimal until we finish probing */
hwif->rqsize = 15;
if (pci_get_drvdata(dev) == NULL)
return;
init_mmio_iops_siimage(hwif);
if (host->host_priv)
init_mmio_iops_siimage(hwif);
}
/**
......@@ -778,8 +746,13 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = {
static int __devinit siimage_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
void __iomem *ioaddr = NULL;
resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
int rc;
struct ide_port_info d;
u8 idx = id->driver_data;
u8 BA5_EN;
d = siimage_chipsets[idx];
......@@ -795,7 +768,36 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
}
return ide_pci_init_one(dev, &d, NULL);
rc = pci_enable_device(dev);
if (rc)
return rc;
pci_read_config_byte(dev, 0x8A, &BA5_EN);
if ((BA5_EN & 0x01) || bar5) {
/*
* Drop back to PIO if we can't map the MMIO. Some systems
* seem to get terminally confused in the PCI spaces.
*/
if (!request_mem_region(bar5, barsize, d.name)) {
printk(KERN_WARNING "siimage: IDE controller MMIO "
"ports not available.\n");
} else {
ioaddr = ioremap(bar5, barsize);
if (ioaddr == NULL)
release_mem_region(bar5, barsize);
}
}
rc = ide_pci_init_one(dev, &d, ioaddr);
if (rc) {
if (ioaddr) {
iounmap(ioaddr);
release_mem_region(bar5, barsize);
}
pci_disable_device(dev);
}
return rc;
}
static const struct pci_device_id siimage_pci_tbl[] = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment