Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: unusual_devs.h entry for nokia 6233
  USB: Fix for typo in ohci-ep93xx.c
  USB: disable USB_MULTITHREAD_PROBE
  USB: add vendor/device id for Option GT Max 3.6 cards
  USB: unusual_devs.h for 0x046b:ff40
  USB: make usbhid ignore Imation Disc Stakka
  USB: rndis_host: fix crash while probing a Nokia S60 mobile
  USB: asix: Detect internal PHY and enable/use accordingly
  usbtouchscreen: make ITM screens report BTN_TOUCH as zero when not touched

drivers/usb/core/Kconfig

@@ -72,22 +72,6 @@ config USB_SUSPEND
 
 	  If you are unsure about this, say N here.
 
-config USB_MULTITHREAD_PROBE
-	bool "USB Multi-threaded probe (EXPERIMENTAL)"
-	depends on USB && EXPERIMENTAL
-	default n
-	help
-	  Say Y here if you want the USB core to spawn a new thread for
-	  every USB device that is probed.  This can cause a small speedup
-	  in boot times on systems with a lot of different USB devices.
-
-	  This option should be safe to enable, but if any odd probing
-	  problems are found, please disable it, or dynamically turn it
-	  off in the /sys/module/usbcore/parameters/multithread_probe
-	  file
-
-	  When in doubt, say N.
-
 config USB_OTG
 	bool
 	depends on USB && EXPERIMENTAL

drivers/usb/core/hub.c

@@ -88,14 +88,7 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait);
 static struct task_struct *khubd_task;
 
 /* multithreaded probe logic */
-static int multithread_probe =
-#ifdef CONFIG_USB_MULTITHREAD_PROBE
-	1;
-#else
-	0;
-#endif
-module_param(multithread_probe, bool, S_IRUGO);
-MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread");
+static int multithread_probe = 0;
 
 /* cycle leds on hubs that aren't blinking for attention */
 static int blinkenlights = 0;

drivers/usb/host/ohci-ep93xx.c

@@ -169,7 +169,7 @@ static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev)
 static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ochi_hcd *ohci = hcd_to_ohci(hcd);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);

drivers/usb/input/hid-core.c

@@ -796,6 +796,9 @@ void usbhid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_USB_RECEIVER	0xc101
 
+#define USB_VENDOR_ID_IMATION		0x0718
+#define USB_DEVICE_ID_DISC_STAKKA	0xd000
+
 /*
  * Alphabetically sorted blacklist by quirk type.
  */
@@ -883,6 +886,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_GTCO_IPANEL_1, USB_DEVICE_ID_GTCO_10, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_8, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_d, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },

drivers/usb/input/usbtouchscreen.c

@@ -66,7 +66,7 @@ struct usbtouch_device_info {
 
 	void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
 	int  (*get_pkt_len) (unsigned char *pkt, int len);
-	int  (*read_data)   (unsigned char *pkt, int *x, int *y, int *touch, int *press);
+	int  (*read_data)   (struct usbtouch_usb *usbtouch, unsigned char *pkt);
 	int  (*init)        (struct usbtouch_usb *usbtouch);
 };
 
@@ -85,6 +85,9 @@ struct usbtouch_usb {
 	struct usbtouch_device_info *type;
 	char name[128];
 	char phys[64];
+
+	int x, y;
+	int touch, press;
 };
 
 
@@ -161,14 +164,14 @@ static struct usb_device_id usbtouch_devices[] = {
 #define EGALAX_PKT_TYPE_REPT		0x80
 #define EGALAX_PKT_TYPE_DIAG		0x0A
 
-static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
 		return 0;
 
-	*x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
-	*y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
-	*touch = pkt[0] & 0x01;
+	dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+	dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+	dev->touch = pkt[0] & 0x01;
 
 	return 1;
 }
@@ -195,11 +198,11 @@ static int egalax_get_pkt_len(unsigned char *buf, int len)
  * PanJit Part
  */
 #ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
-static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	*x = ((pkt[2] & 0x0F) << 8) | pkt[1];
-	*y = ((pkt[4] & 0x0F) << 8) | pkt[3];
-	*touch = pkt[0] & 0x01;
+	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
 
 	return 1;
 }
@@ -215,11 +218,11 @@ static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int
 #define MTOUCHUSB_RESET                 7
 #define MTOUCHUSB_REQ_CTRLLR_ID         10
 
-static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	*x = (pkt[8] << 8) | pkt[7];
-	*y = (pkt[10] << 8) | pkt[9];
-	*touch = (pkt[2] & 0x40) ? 1 : 0;
+	dev->x = (pkt[8] << 8) | pkt[7];
+	dev->y = (pkt[10] << 8) | pkt[9];
+	dev->touch = (pkt[2] & 0x40) ? 1 : 0;
 
 	return 1;
 }
@@ -260,14 +263,32 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
  * ITM Part
  */
 #ifdef CONFIG_USB_TOUCHSCREEN_ITM
-static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	*x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
-	*y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
-	*press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
-	*touch = ~pkt[7] & 0x20;
+	int touch;
+	/*
+	 * ITM devices report invalid x/y data if not touched.
+	 * if the screen was touched before but is not touched any more
+	 * report touch as 0 with the last valid x/y data once. then stop
+	 * reporting data until touched again.
+	 */
+	dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
+
+	touch = ~pkt[7] & 0x20;
+	if (!touch) {
+		if (dev->touch) {
+			dev->touch = 0;
+			return 1;
+		}
 
-	return *touch;
+		return 0;
+	}
+
+	dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	dev->touch = touch;
+
+	return 1;
 }
 #endif
 
@@ -276,7 +297,7 @@ static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *pr
  * eTurboTouch part
  */
 #ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
-static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	unsigned int shift;
 
@@ -285,9 +306,9 @@ static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int
 		return 0;
 
 	shift = (6 - (pkt[0] & 0x03));
-	*x = ((pkt[3] << 7) | pkt[4]) >> shift;
-	*y = ((pkt[1] << 7) | pkt[2]) >> shift;
-	*touch = (pkt[0] & 0x10) ? 1 : 0;
+	dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
+	dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
+	dev->touch = (pkt[0] & 0x10) ? 1 : 0;
 
 	return 1;
 }
@@ -307,14 +328,14 @@ static int eturbo_get_pkt_len(unsigned char *buf, int len)
  * Gunze part
  */
 #ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
-static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
 		return 0;
 
-	*x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
-	*y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
-	*touch = pkt[0] & 0x20;
+	dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
+	dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	dev->touch = pkt[0] & 0x20;
 
 	return 1;
 }
@@ -383,11 +404,11 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 }
 
 
-static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	*x = ((pkt[2] & 0x03) << 8) | pkt[1];
-	*y = ((pkt[4] & 0x03) << 8) | pkt[3];
-	*touch = pkt[0] & 0x01;
+	dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
 
 	return 1;
 }
@@ -492,23 +513,22 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
                                  unsigned char *pkt, int len)
 {
-	int x, y, touch, press;
 	struct usbtouch_device_info *type = usbtouch->type;
 
-	if (!type->read_data(pkt, &x, &y, &touch, &press))
+	if (!type->read_data(usbtouch, pkt))
 			return;
 
-	input_report_key(usbtouch->input, BTN_TOUCH, touch);
+	input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
 
 	if (swap_xy) {
-		input_report_abs(usbtouch->input, ABS_X, y);
-		input_report_abs(usbtouch->input, ABS_Y, x);
+		input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
+		input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
 	} else {
-		input_report_abs(usbtouch->input, ABS_X, x);
-		input_report_abs(usbtouch->input, ABS_Y, y);
+		input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
+		input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
 	}
 	if (type->max_press)
-		input_report_abs(usbtouch->input, ABS_PRESSURE, press);
+		input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
 	input_sync(usbtouch->input);
 }
 

drivers/usb/net/asix.c

@@ -898,7 +898,7 @@ static int ax88772_link_reset(struct usbnet *dev)
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret;
+	int ret, embd_phy;
 	void *buf;
 	u16 rx_ctl;
 	struct asix_data *data = (struct asix_data *)&dev->data;
@@ -919,13 +919,15 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0)
 		goto out2;
 
+	/* 0x10 is the phy id of the embedded 10/100 ethernet phy */
+	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
 	if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
-				1, 0, 0, buf)) < 0) {
+				embd_phy, 0, 0, buf)) < 0) {
 		dbg("Select PHY #1 failed: %d", ret);
 		goto out2;
 	}
 
-	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD)) < 0)
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL)) < 0)
 		goto out2;
 
 	msleep(150);
@@ -933,8 +935,14 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 		goto out2;
 
 	msleep(150);
-	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
-		goto out2;
+	if (embd_phy) {
+		if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0)
+			goto out2;
+	}
+	else {
+		if ((ret = asix_sw_reset(dev, AX_SWRESET_PRTE)) < 0)
+			goto out2;
+	}
 
 	msleep(150);
 	rx_ctl = asix_read_rx_ctl(dev);

drivers/usb/net/rndis_host.c

@@ -379,6 +379,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int			retval;
 	struct net_device	*net = dev->net;
+	struct cdc_state	*info = (void *) &dev->data;
 	union {
 		void			*buf;
 		struct rndis_msg_hdr	*header;
@@ -397,7 +398,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
 		return -ENOMEM;
 	retval = usbnet_generic_cdc_bind(dev, intf);
 	if (retval < 0)
-		goto done;
+		goto fail;
 
 	net->hard_header_len += sizeof (struct rndis_data_hdr);
 
@@ -412,10 +413,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (unlikely(retval < 0)) {
 		/* it might not even be an RNDIS device!! */
 		dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
-fail:
-		usb_driver_release_interface(driver_of(intf),
-			((struct cdc_state *)&(dev->data))->data);
-		goto done;
+		goto fail_and_release;
 	}
 	dev->hard_mtu = le32_to_cpu(u.init_c->max_transfer_size);
 	/* REVISIT:  peripheral "alignment" request is ignored ... */
@@ -431,7 +429,7 @@ fail:
 	retval = rndis_command(dev, u.header);
 	if (unlikely(retval < 0)) {
 		dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
-		goto fail;
+		goto fail_and_release;
 	}
 	tmp = le32_to_cpu(u.get_c->offset);
 	if (unlikely((tmp + 8) > (1024 - ETH_ALEN)
@@ -439,7 +437,7 @@ fail:
 		dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n",
 			tmp, le32_to_cpu(u.get_c->len));
 		retval = -EDOM;
-		goto fail;
+		goto fail_and_release;
 	}
 	memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN);
 
@@ -455,11 +453,18 @@ fail:
 	retval = rndis_command(dev, u.header);
 	if (unlikely(retval < 0)) {
 		dev_err(&intf->dev, "rndis set packet filter, %d\n", retval);
-		goto fail;
+		goto fail_and_release;
 	}
 
 	retval = 0;
-done:
+
+	kfree(u.buf);
+	return retval;
+
+fail_and_release:
+	usb_set_intfdata(info->data, NULL);
+	usb_driver_release_interface(driver_of(intf), info->data);
+fail:
 	kfree(u.buf);
 	return retval;
 }

drivers/usb/serial/option.c

@@ -78,6 +78,7 @@ static int  option_send_setup(struct usb_serial_port *port);
 #define OPTION_PRODUCT_FUSION2          0x6300
 #define OPTION_PRODUCT_COBRA            0x6500
 #define OPTION_PRODUCT_COBRA2           0x6600
+#define OPTION_PRODUCT_GTMAX36          0x6701
 #define HUAWEI_PRODUCT_E600             0x1001
 #define HUAWEI_PRODUCT_E220             0x1003
 #define AUDIOVOX_PRODUCT_AIRCARD        0x0112
@@ -90,6 +91,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
@@ -104,6 +106,7 @@ static struct usb_device_id option_ids1[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },

drivers/usb/storage/unusual_devs.h

@@ -197,6 +197,13 @@ UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0370,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
+UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
+		"Nokia",
+		"Nokia 6233",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
 /* Reported by Alex Corcoles <alex@corcoles.net> */
 UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		"Nokia",
@@ -254,6 +261,18 @@ UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
 		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
 #endif
 
+/*
+ * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
+ * Reported by Pete Zaitcev <zaitcev@redhat.com>
+ * This device chokes on both version of MODE SENSE which we have, so
+ * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
+ */
+UNUSUAL_DEV(  0x046b, 0xff40, 0x0100, 0x0100,
+		"AMI",
+		"Virtual Floppy",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT),
+
 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
 		"Kyocera",