Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_atp867x: add Power Management support
  pata_atp867x: PIO support fixes
  pata_atp867x: clarifications in timings calculations and cable detection
  pata_atp867x: fix it to not claim MWDMA support
  libata: fix incorrect link online check during probe
  ahci: filter FPDMA non-zero offset enable for Aspire 3810T
  libata: make gtf_filter per-dev
  libata: implement more acpi filtering options
  libata: cosmetic updates
  ahci: display all AHCI 1.3 HBA capability flags (v2)
  pata_ali: trivial fix of a very frequent spelling mistake
  ahci: disable 64bit DMA by default on SB600s

drivers/ata/libata-acpi.c

@@ -20,19 +20,9 @@
 
 #include <acpi/acpi_bus.h>
 
-enum {
-	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
-	ATA_ACPI_FILTER_LOCK	= 1 << 1,
-	ATA_ACPI_FILTER_DIPM	= 1 << 2,
-
-	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
-				  ATA_ACPI_FILTER_LOCK |
-				  ATA_ACPI_FILTER_DIPM,
-};
-
-static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
 module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
 
 #define NO_PORT_MULT		0xffff
 #define SATA_ADR(root, pmp)	(((root) << 16) | (pmp))
@@ -613,10 +603,11 @@ static void ata_acpi_gtf_to_tf(struct ata_device *dev,
 	tf->command = gtf->tf[6];	/* 0x1f7 */
 }
 
-static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+static int ata_acpi_filter_tf(struct ata_device *dev,
+			      const struct ata_taskfile *tf,
 			      const struct ata_taskfile *ptf)
 {
-	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+	if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
 		/* libata doesn't use ACPI to configure transfer mode.
 		 * It will only confuse device configuration.  Skip.
 		 */
@@ -625,7 +616,7 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
 			return 1;
 	}
 
-	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+	if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
 		/* BIOS writers, sorry but we don't wanna lock
 		 * features unless the user explicitly said so.
 		 */
@@ -647,12 +638,23 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
 			return 1;
 	}
 
-	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+	if (tf->command == ATA_CMD_SET_FEATURES &&
+	    tf->feature == SETFEATURES_SATA_ENABLE) {
 		/* inhibit enabling DIPM */
-		if (tf->command == ATA_CMD_SET_FEATURES &&
-		    tf->feature == SETFEATURES_SATA_ENABLE &&
+		if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
 		    tf->nsect == SATA_DIPM)
 			return 1;
+
+		/* inhibit FPDMA non-zero offset */
+		if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+		    (tf->nsect == SATA_FPDMA_OFFSET ||
+		     tf->nsect == SATA_FPDMA_IN_ORDER))
+			return 1;
+
+		/* inhibit FPDMA auto activation */
+		if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+		    tf->nsect == SATA_FPDMA_AA)
+			return 1;
 	}
 
 	return 0;
@@ -704,7 +706,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 		pptf = &ptf;
 	}
 
-	if (!ata_acpi_filter_tf(&tf, pptf)) {
+	if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
 		rtf = tf;
 		err_mask = ata_exec_internal(dev, &rtf, NULL,
 					     DMA_NONE, NULL, 0, 0);

drivers/ata/libata-core.c

@@ -5591,6 +5591,9 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
 
 		dev->link = link;
 		dev->devno = dev - link->device;
+#ifdef CONFIG_ATA_ACPI
+		dev->gtf_filter = ata_acpi_gtf_filter;
+#endif
 		ata_dev_init(dev);
 	}
 }

drivers/ata/libata-eh.c

@@ -2667,14 +2667,14 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		dev->pio_mode = XFER_PIO_0;
 		dev->flags &= ~ATA_DFLAG_SLEEPING;
 
-		if (!ata_phys_link_offline(ata_dev_phys_link(dev))) {
-			/* apply class override */
-			if (lflags & ATA_LFLAG_ASSUME_ATA)
-				classes[dev->devno] = ATA_DEV_ATA;
-			else if (lflags & ATA_LFLAG_ASSUME_SEMB)
-				classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
-		} else
-			classes[dev->devno] = ATA_DEV_NONE;
+		if (ata_phys_link_offline(ata_dev_phys_link(dev)))
+			continue;
+
+		/* apply class override */
+		if (lflags & ATA_LFLAG_ASSUME_ATA)
+			classes[dev->devno] = ATA_DEV_ATA;
+		else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+			classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
 	}
 
 	/* record current link speed */
@@ -2713,34 +2713,48 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ap->pflags &= ~ATA_PFLAG_EH_PENDING;
 	spin_unlock_irqrestore(link->ap->lock, flags);
 
-	/* Make sure onlineness and classification result correspond.
+	/*
+	 * Make sure onlineness and classification result correspond.
 	 * Hotplug could have happened during reset and some
 	 * controllers fail to wait while a drive is spinning up after
 	 * being hotplugged causing misdetection.  By cross checking
-	 * link onlineness and classification result, those conditions
-	 * can be reliably detected and retried.
+	 * link on/offlineness and classification result, those
+	 * conditions can be reliably detected and retried.
 	 */
 	nr_unknown = 0;
 	ata_for_each_dev(dev, link, ALL) {
-		/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
-		if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
-			classes[dev->devno] = ATA_DEV_NONE;
-			if (ata_phys_link_online(ata_dev_phys_link(dev)))
+		if (ata_phys_link_online(ata_dev_phys_link(dev))) {
+			if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+				ata_dev_printk(dev, KERN_DEBUG, "link online "
+					       "but device misclassifed\n");
+				classes[dev->devno] = ATA_DEV_NONE;
 				nr_unknown++;
+			}
+		} else if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
+			if (ata_class_enabled(classes[dev->devno]))
+				ata_dev_printk(dev, KERN_DEBUG, "link offline, "
+					       "clearing class %d to NONE\n",
+					       classes[dev->devno]);
+			classes[dev->devno] = ATA_DEV_NONE;
+		} else if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+			ata_dev_printk(dev, KERN_DEBUG, "link status unknown, "
+				       "clearing UNKNOWN to NONE\n");
+			classes[dev->devno] = ATA_DEV_NONE;
 		}
 	}
 
 	if (classify && nr_unknown) {
 		if (try < max_tries) {
 			ata_link_printk(link, KERN_WARNING, "link online but "
-				       "device misclassified, retrying\n");
+					"%d devices misclassified, retrying\n",
+					nr_unknown);
 			failed_link = link;
 			rc = -EAGAIN;
 			goto fail;
 		}
 		ata_link_printk(link, KERN_WARNING,
-			       "link online but device misclassified, "
-			       "device detection might fail\n");
+				"link online but %d devices misclassified, "
+				"device detection might fail\n", nr_unknown);
 	}
 
 	/* reset successful, schedule revalidation */

drivers/ata/libata.h

@@ -118,6 +118,8 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
 
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
+extern unsigned int ata_acpi_gtf_filter;
+
 extern void ata_acpi_associate_sata_port(struct ata_port *ap);
 extern void ata_acpi_associate(struct ata_host *host);
 extern void ata_acpi_dissociate(struct ata_host *host);

drivers/ata/pata_ali.c

@@ -290,7 +290,7 @@ static void ali_warn_atapi_dma(struct ata_device *adev)
 
 	if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
 		ata_dev_printk(adev, KERN_WARNING,
-			       "WARNING: ATAPI DMA disabled for reliablity issues.  It can be enabled\n");
+			       "WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled\n");
 		ata_dev_printk(adev, KERN_WARNING,
 			       "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
 	}

drivers/ata/pata_atp867x.c

@@ -118,20 +118,13 @@ struct atp867x_priv {
 	int		pci66mhz;
 };
 
-static inline u8 atp867x_speed_to_mode(u8 speed)
-{
-	return speed - XFER_UDMA_0 + 1;
-}
-
 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
 	struct atp867x_priv *dp = ap->private_data;
 	u8 speed = adev->dma_mode;
 	u8 b;
-	u8 mode;
-
-	mode = atp867x_speed_to_mode(speed);
+	u8 mode = speed - XFER_UDMA_0 + 1;
 
 	/*
 	 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
@@ -156,25 +149,38 @@ static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	iowrite8(b, dp->dma_mode);
 }
 
-static int atp867x_get_active_clocks_shifted(unsigned int clk)
+static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
+	unsigned int clk)
 {
+	struct atp867x_priv *dp = ap->private_data;
 	unsigned char clocks = clk;
 
+	/*
+	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
+	 * on 66MHz bus
+	 */
+	if (dp->pci66mhz)
+		clocks++;
+
 	switch (clocks) {
 	case 0:
 		clocks = 1;
 		break;
-	case 1 ... 7:
-		break;
-	case 8 ... 12:
-		clocks = 7;
+	case 1 ... 6:
 		break;
 	default:
 		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
-			"Using default 8clk.\n", clk);
-		clocks = 0;	/* 8 clk */
+			"Using 12clk.\n", clk);
+	case 9 ... 12:
+		clocks = 7;	/* 12 clk */
 		break;
+	case 7:
+	case 8:	/* default 8 clk */
+		clocks = 0;
+		goto active_clock_shift_done;
 	}
+
+active_clock_shift_done:
 	return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
 }
 
@@ -188,20 +194,20 @@ static int atp867x_get_recover_clocks_shifted(unsigned int clk)
 		break;
 	case 1 ... 11:
 		break;
-	case 12:
-		clocks = 0;
-		break;
-	case 13: case 14:
-		--clocks;
+	case 13:
+	case 14:
+		--clocks;	/* by the spec */
 		break;
 	case 15:
 		break;
 	default:
 		printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
-			"Using default 15clk.\n", clk);
-		clocks = 0;	/* 12 clk */
+			"Using default 12clk.\n", clk);
+	case 12:	/* default 12 clk */
+		clocks = 0;
 		break;
 	}
+
 	return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
 }
 
@@ -230,25 +236,38 @@ static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
 	iowrite8(b, dp->dma_mode);
 
-	b = atp867x_get_active_clocks_shifted(t.active) |
-		atp867x_get_recover_clocks_shifted(t.recover);
-	if (dp->pci66mhz)
-		b += 0x10;
+	b = atp867x_get_active_clocks_shifted(ap, t.active) |
+	    atp867x_get_recover_clocks_shifted(t.recover);
 
 	if (adev->devno & 1)
 		iowrite8(b, dp->slave_piospd);
 	else
 		iowrite8(b, dp->mstr_piospd);
 
-	/*
-	 * use the same value for comand timing as for PIO timimg
-	 */
+	b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
+	    atp867x_get_recover_clocks_shifted(t.rec8b);
+
 	iowrite8(b, dp->eightb_piospd);
 }
 
+static int atp867x_cable_override(struct pci_dev *pdev)
+{
+	if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
+		(pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
+		 pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
+		return 1;
+	}
+	return 0;
+}
+
 static int atp867x_cable_detect(struct ata_port *ap)
 {
-	return ATA_CBL_PATA40_SHORT;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (atp867x_cable_override(pdev))
+		return ATA_CBL_PATA40_SHORT;
+
+	return ATA_CBL_PATA_UNK;
 }
 
 static struct scsi_host_template atp867x_sht = {
@@ -471,7 +490,6 @@ static int atp867x_init_one(struct pci_dev *pdev,
 	static const struct ata_port_info info_867x = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA6,
 		.port_ops	= &atp867x_ops,
 	};
@@ -515,6 +533,23 @@ err_out:
 	return rc;
 }
 
+#ifdef CONFIG_PM
+static int atp867x_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	atp867x_fixup(host);
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 static struct pci_device_id atp867x_pci_tbl[] = {
 	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A),	0 },
 	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B),	0 },
@@ -526,6 +561,10 @@ static struct pci_driver atp867x_driver = {
 	.id_table 	= atp867x_pci_tbl,
 	.probe 		= atp867x_init_one,
 	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= atp867x_reinit_one,
+#endif
 };
 
 static int __init atp867x_init(void)

include/linux/ata.h

@@ -334,9 +334,12 @@ enum {
 	SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
 
 	/* SETFEATURE Sector counts for SATA features */
-	SATA_AN			= 0x05,  /* Asynchronous Notification */
-	SATA_DIPM		= 0x03,  /* Device Initiated Power Management */
-	SATA_FPDMA_AA		= 0x02,  /* DMA Setup FIS Auto-Activate */
+	SATA_FPDMA_OFFSET	= 0x01,	/* FPDMA non-zero buffer offsets */
+	SATA_FPDMA_AA		= 0x02, /* FPDMA Setup FIS Auto-Activate */
+	SATA_DIPM		= 0x03,	/* Device Initiated Power Management */
+	SATA_FPDMA_IN_ORDER	= 0x04,	/* FPDMA in-order data delivery */
+	SATA_AN			= 0x05,	/* Asynchronous Notification */
+	SATA_SSP		= 0x06,	/* Software Settings Preservation */
 
 	/* feature values for SET_MAX */
 	ATA_SET_MAX_ADDR	= 0x00,

include/linux/libata.h

@@ -418,6 +418,17 @@ enum {
 				  ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
 				  ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
 				  ATA_TIMING_UDMA,
+
+	/* ACPI constants */
+	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
+	ATA_ACPI_FILTER_LOCK	= 1 << 1,
+	ATA_ACPI_FILTER_DIPM	= 1 << 2,
+	ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3,	/* FPDMA non-zero offset */
+	ATA_ACPI_FILTER_FPDMA_AA = 1 << 4,	/* FPDMA auto activate */
+
+	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
+				  ATA_ACPI_FILTER_LOCK |
+				  ATA_ACPI_FILTER_DIPM,
 };
 
 enum ata_xfer_mask {
@@ -587,6 +598,7 @@ struct ata_device {
 #ifdef CONFIG_ATA_ACPI
 	acpi_handle		acpi_handle;
 	union acpi_object	*gtf_cache;
+	unsigned int		gtf_filter;
 #endif
 	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
 	u64			n_sectors;	/* size of device, if ATA */