Commit 35783ec0 authored by Bryan O'Sullivan's avatar Bryan O'Sullivan Committed by Linus Torvalds

[PATCH] IB/ipath: fix a bug that results in addresses near 0 being written via DMA

We can't tell for sure if any packets are in the infinipath receive buffer
when we shut down a chip port.  Normally this is taken care of by orderly
shutdown, but when processes are terminated, or sending process has a bug, we
can continue to receive packets.  So rather than writing zero to the address
registers for the closing port, we point it at a dummy memory.
Signed-off-by: default avatarDave Olson <dave.olson@qlogic.com>
Signed-off-by: default avatarBryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 6d8e9dd0
......@@ -1824,6 +1824,12 @@ static void cleanup_device(struct ipath_devdata *dd)
dd->ipath_pioavailregs_phys);
dd->ipath_pioavailregs_dma = NULL;
}
if (dd->ipath_dummy_hdrq) {
dma_free_coherent(&dd->pcidev->dev,
dd->ipath_pd[0]->port_rcvhdrq_size,
dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
dd->ipath_dummy_hdrq = NULL;
}
if (dd->ipath_pageshadow) {
struct page **tmpp = dd->ipath_pageshadow;
......
......@@ -1486,42 +1486,51 @@ static int ipath_close(struct inode *in, struct file *fp)
}
if (dd->ipath_kregbase) {
ipath_write_kreg_port(
dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
port, 0ULL);
ipath_write_kreg_port(
dd, dd->ipath_kregs->kr_rcvhdraddr,
pd->port_port, 0);
int i;
/* atomically clear receive enable port. */
clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + port,
&dd->ipath_rcvctrl);
ipath_write_kreg( dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
/* and read back from chip to be sure that nothing
* else is in flight when we do the rest */
(void)ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
/* clean up the pkeys for this port user */
ipath_clean_part_key(pd, dd);
if (port < dd->ipath_cfgports) {
int i = dd->ipath_pbufsport * (port - 1);
ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport);
/* atomically clear receive enable port. */
clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + port,
&dd->ipath_rcvctrl);
ipath_write_kreg(
dd,
dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
if (dd->ipath_pageshadow)
unlock_expected_tids(pd);
ipath_stats.sps_ports--;
ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
pd->port_comm, pd->port_pid,
dd->ipath_unit, port);
}
/*
* be paranoid, and never write 0's to these, just use an
* unused part of the port 0 tail page. Of course,
* rcvhdraddr points to a large chunk of memory, so this
* could still trash things, but at least it won't trash
* page 0, and by disabling the port, it should stop "soon",
* even if a packet or two is in already in flight after we
* disabled the port.
*/
ipath_write_kreg_port(dd,
dd->ipath_kregs->kr_rcvhdrtailaddr, port,
dd->ipath_dummy_hdrq_phys);
ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
pd->port_port, dd->ipath_dummy_hdrq_phys);
i = dd->ipath_pbufsport * (port - 1);
ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport);
if (dd->ipath_pageshadow)
unlock_expected_tids(pd);
ipath_stats.sps_ports--;
ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
pd->port_comm, pd->port_pid,
dd->ipath_unit, port);
dd->ipath_f_clear_tids(dd, pd->port_port);
}
pd->port_cnt = 0;
pd->port_pid = 0;
dd->ipath_f_clear_tids(dd, pd->port_port);
dd->ipath_pd[pd->port_port] = NULL; /* before releasing mutex */
mutex_unlock(&ipath_mutex);
ipath_free_pddata(dd, pd); /* after releasing the mutex */
......
......@@ -647,6 +647,7 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
u32 val32, kpiobufs;
u64 val;
struct ipath_portdata *pd = NULL; /* keep gcc4 happy */
gfp_t gfp_flags = GFP_USER | __GFP_COMP;
ret = init_housekeeping(dd, &pd, reinit);
if (ret)
......@@ -834,6 +835,22 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
else
enable_chip(dd, pd, reinit);
if (!ret && !reinit) {
/* used when we close a port, for DMA already in flight at close */
dd->ipath_dummy_hdrq = dma_alloc_coherent(
&dd->pcidev->dev, pd->port_rcvhdrq_size,
&dd->ipath_dummy_hdrq_phys,
gfp_flags);
if (!dd->ipath_dummy_hdrq ) {
dev_info(&dd->pcidev->dev,
"Couldn't allocate 0x%lx bytes for dummy hdrq\n",
pd->port_rcvhdrq_size);
/* fallback to just 0'ing */
dd->ipath_dummy_hdrq_phys = 0UL;
}
}
/*
* cause retrigger of pending interrupts ignored during init,
* even if we had errors
......
......@@ -352,6 +352,8 @@ struct ipath_devdata {
/* check for stale messages in rcv queue */
/* only allow one intr at a time. */
unsigned long ipath_rcv_pending;
void *ipath_dummy_hdrq; /* used after port close */
dma_addr_t ipath_dummy_hdrq_phys;
/*
* Shadow copies of registers; size indicates read access size.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment