Commit 34c9ac23 authored by vikram pandita's avatar vikram pandita Committed by Tony Lindgren

omap: 3630sdp: introduce 3630 sdp board support

Add 3630SDP board support

The board shares the same peripherals as a zoom2 main.
So reuse the peripheral file of zoom platform.

Peripheral    zoom2    zoom3  sdp3630
---------------------------------------
Ethernet	smsc	smsc	smc
NOR		n/a     n/a	B
Onenand	  	n/a     n/a	B
HDMI		A	A	B (persent on different i2c)
NAND		A	A	A (same nand)
SDRAM		A	A	A (same sdram)
Keypad		A	A	A (same twl)
Camera		A	A	A (same sensor can be mounted)
LCD Display	A	A	A (same wvga display)
OPPs		A	A	A (same chip feature)
Audio		A	A	A (same audio via twl5030)

OMAP3630 details can be found here:
http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12836&contentId=52606Signed-off-by: default avatarVikram Pandita <vikram.pandita@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 9d9e5027
......@@ -109,6 +109,10 @@ config MACH_IGEP0020
bool "IGEP0020"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config MACH_OMAP_4430SDP
bool "OMAP 4430 SDP board"
depends on ARCH_OMAP4
......@@ -83,6 +83,9 @@ obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \
board-zoom-peripherals.o \
mmc-twl4030.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
......
/*
* Copyright (C) 2009 Texas Instruments Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/common.h>
#include <plat/board.h>
#include <plat/gpmc-smc91x.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include "sdram-hynix-h8mbx00u0mer-0em.h"
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
static struct omap_smc91x_platform_data board_smc91x_data = {
.cs = 3,
.flags = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
};
static void __init board_smc91x_init(void)
{
board_smc91x_data.gpio_irq = 158;
gpmc_smc91x_init(&board_smc91x_data);
}
#else
static inline void board_smc91x_init(void)
{
}
#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
static void enable_board_wakeup_source(void)
{
omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = 126,
.reset_gpio_port[1] = 61,
.reset_gpio_port[2] = -EINVAL
};
static void __init omap_sdp_map_io(void)
{
omap2_set_globals_343x();
omap2_map_common_io();
}
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
static void __init omap_sdp_init_irq(void)
{
omap_board_config = sdp_config;
omap_board_config_size = ARRAY_SIZE(sdp_config);
omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static void __init omap_sdp_init(void)
{
zoom_peripherals_init();
board_smc91x_init();
enable_board_wakeup_source();
usb_ehci_init(&ehci_pdata);
}
MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_sdp_map_io,
.init_irq = omap_sdp_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap_timer,
MACHINE_END
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment