Merge branch 'master' into for-linus

MAINTAINERS

@@ -4343,6 +4343,16 @@ L:	linux-wireless@vger.kernel.org
 W:	http://oops.ghostprotocols.net:81/blog
 S:	Maintained
 
+WM97XX TOUCHSCREEN DRIVERS
+P:	Mark Brown
+M:	broonie@opensource.wolfsonmicro.com
+P:	Liam Girdwood
+M:	liam.girdwood@wolfsonmicro.com
+L:	linux-input@vger.kernel.org
+T:	git git://opensource.wolfsonmicro.com/linux-2.6-touch
+W:	http://opensource.wolfsonmicro.com/node/7
+S:	Supported
+
 X.25 NETWORK LAYER
 P:	Henner Eisen
 M:	eis@baty.hanse.de

drivers/char/keyboard.c

@@ -42,6 +42,7 @@
 #include <linux/input.h>
 #include <linux/reboot.h>
 #include <linux/notifier.h>
+#include <linux/jiffies.h>
 
 extern void ctrl_alt_del(void);
 
@@ -928,7 +929,8 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
 	if (up_flag) {
 		if (brl_timeout) {
 			if (!committing ||
-			    jiffies - releasestart > (brl_timeout * HZ) / 1000) {
+			    time_after(jiffies,
+				       releasestart + msecs_to_jiffies(brl_timeout))) {
 				committing = pressed;
 				releasestart = jiffies;
 			}
@@ -1237,6 +1239,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 	}
 
 	param.shift = shift_final = (shift_state | kbd->slockstate) ^ kbd->lockstate;
+	param.ledstate = kbd->ledflagstate;
 	key_map = key_maps[shift_final];
 
 	if (atomic_notifier_call_chain(&keyboard_notifier_list, KBD_KEYCODE, &param) == NOTIFY_STOP || !key_map) {
@@ -1285,6 +1288,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 
 	(*k_handler[type])(vc, keysym & 0xff, !down);
 
+	param.ledstate = kbd->ledflagstate;
 	atomic_notifier_call_chain(&keyboard_notifier_list, KBD_POST_KEYSYM, &param);
 
 	if (type != KT_SLOCK)

drivers/hid/usbhid/hid-quirks.c

@@ -405,6 +405,9 @@
 #define USB_VENDOR_ID_YEALINK		0x6993
 #define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K	0xb001
 
+#define USB_VENDOR_ID_KYE		0x0458
+#define USB_DEVICE_ID_KYE_GPEN_560	0x5003
+
 /*
  * Alphabetically sorted blacklist by quirk type.
  */
@@ -703,6 +706,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_63, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_64, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR, USB_DEVICE_ID_N_S_HARMONY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560, HID_QUIRK_IGNORE },
 
 	{ 0, 0 }
 };

drivers/input/input-polldev.c

@@ -73,7 +73,7 @@ static void input_polled_device_work(struct work_struct *work)
 
 static int input_open_polled_device(struct input_dev *input)
 {
-	struct input_polled_dev *dev = input->private;
+	struct input_polled_dev *dev = input_get_drvdata(input);
 	int error;
 
 	error = input_polldev_start_workqueue();
@@ -91,7 +91,7 @@ static int input_open_polled_device(struct input_dev *input)
 
 static void input_close_polled_device(struct input_dev *input)
 {
-	struct input_polled_dev *dev = input->private;
+	struct input_polled_dev *dev = input_get_drvdata(input);
 
 	cancel_delayed_work_sync(&dev->work);
 	input_polldev_stop_workqueue();
@@ -151,10 +151,10 @@ int input_register_polled_device(struct input_polled_dev *dev)
 {
 	struct input_dev *input = dev->input;
 
+	input_set_drvdata(input, dev);
 	INIT_DELAYED_WORK(&dev->work, input_polled_device_work);
 	if (!dev->poll_interval)
 		dev->poll_interval = 500;
-	input->private = dev;
 	input->open = input_open_polled_device;
 	input->close = input_close_polled_device;
 

drivers/input/joystick/Kconfig

@@ -193,6 +193,18 @@ config JOYSTICK_TWIDJOY
 	  To compile this driver as a module, choose M here: the
 	  module will be called twidjoy.
 
+config JOYSTICK_ZHENHUA
+	tristate "5-byte Zhenhua RC transmitter"
+	select SERIO
+	help
+	  Say Y here if you have a Zhen Hua PPM-4CH transmitter which is
+	  supplied with a ready to fly micro electric indoor helicopters
+	  such as EasyCopter, Lama, MiniCopter, DragonFly or Jabo and want
+	  to use it via serial cable as a joystick.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zhenhua.
+
 config JOYSTICK_DB9
 	tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads"
 	depends on PARPORT

drivers/input/joystick/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_JOYSTICK_GF2K)		+= gf2k.o
 obj-$(CONFIG_JOYSTICK_GRIP)		+= grip.o
 obj-$(CONFIG_JOYSTICK_GRIP_MP)		+= grip_mp.o
 obj-$(CONFIG_JOYSTICK_GUILLEMOT)	+= guillemot.o
+obj-$(CONFIG_JOYSTICK_IFORCE)		+= iforce/
 obj-$(CONFIG_JOYSTICK_INTERACT)		+= interact.o
 obj-$(CONFIG_JOYSTICK_JOYDUMP)		+= joydump.o
 obj-$(CONFIG_JOYSTICK_MAGELLAN)		+= magellan.o
@@ -27,5 +28,5 @@ obj-$(CONFIG_JOYSTICK_TURBOGRAFX)	+= turbografx.o
 obj-$(CONFIG_JOYSTICK_TWIDJOY)		+= twidjoy.o
 obj-$(CONFIG_JOYSTICK_WARRIOR)		+= warrior.o
 obj-$(CONFIG_JOYSTICK_XPAD)		+= xpad.o
+obj-$(CONFIG_JOYSTICK_ZHENHUA)		+= zhenhua.o
 
-obj-$(CONFIG_JOYSTICK_IFORCE)		+= iforce/

drivers/input/joystick/zhenhua.c

+/*
+ *  derived from "twidjoy.c"
+ *
+ *  Copyright (c) 2008 Martin Kebert
+ *  Copyright (c) 2001 Arndt Schoenewald
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *  Copyright (c) 2000 Mark Fletcher
+ *
+ */
+
+/*
+ * Driver to use 4CH RC transmitter using Zhen Hua 5-byte protocol (Walkera Lama,
+ * EasyCopter etc.) as a joystick under Linux.
+ *
+ * RC transmitters using Zhen Hua 5-byte protocol are cheap four channels
+ * transmitters for control a RC planes or RC helicopters with possibility to
+ * connect on a serial port.
+ * Data coming from transmitter is in this order:
+ * 1. byte = synchronisation byte
+ * 2. byte = X axis
+ * 3. byte = Y axis
+ * 4. byte = RZ axis
+ * 5. byte = Z axis
+ * (and this is repeated)
+ *
+ * For questions or feedback regarding this driver module please contact:
+ * Martin Kebert <gkmarty@gmail.com> - but I am not a C-programmer nor kernel
+ * coder :-(
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"RC transmitter with 5-byte Zhen Hua protocol joystick driver"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Constants.
+ */
+
+#define ZHENHUA_MAX_LENGTH 5
+
+/*
+ * Zhen Hua data.
+ */
+
+struct zhenhua {
+	struct input_dev *dev;
+	int idx;
+	unsigned char data[ZHENHUA_MAX_LENGTH];
+	char phys[32];
+};
+
+
+/* bits in all incoming bytes needs to be "reversed" */
+static int zhenhua_bitreverse(int x)
+{
+	x = ((x & 0xaa) >> 1) | ((x & 0x55) << 1);
+	x = ((x & 0xcc) >> 2) | ((x & 0x33) << 2);
+	x = ((x & 0xf0) >> 4) | ((x & 0x0f) << 4);
+	return x;
+}
+
+/*
+ * zhenhua_process_packet() decodes packets the driver receives from the
+ * RC transmitter. It updates the data accordingly.
+ */
+
+static void zhenhua_process_packet(struct zhenhua *zhenhua)
+{
+	struct input_dev *dev = zhenhua->dev;
+	unsigned char *data = zhenhua->data;
+
+	input_report_abs(dev, ABS_Y, data[1]);
+	input_report_abs(dev, ABS_X, data[2]);
+	input_report_abs(dev, ABS_RZ, data[3]);
+	input_report_abs(dev, ABS_Z, data[4]);
+
+	input_sync(dev);
+}
+
+/*
+ * zhenhua_interrupt() is called by the low level driver when characters
+ * are ready for us. We then buffer them for further processing, or call the
+ * packet processing routine.
+ */
+
+static irqreturn_t zhenhua_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+	struct zhenhua *zhenhua = serio_get_drvdata(serio);
+
+	/* All Zhen Hua packets are 5 bytes. The fact that the first byte
+	 * is allways 0xf7 and all others are in range 0x32 - 0xc8 (50-200)
+	 * can be used to check and regain sync. */
+
+	if (data == 0xef)
+		zhenhua->idx = 0;	/* this byte starts a new packet */
+	else if (zhenhua->idx == 0)
+		return IRQ_HANDLED;	/* wrong MSB -- ignore this byte */
+
+	if (zhenhua->idx < ZHENHUA_MAX_LENGTH)
+		zhenhua->data[zhenhua->idx++] = zhenhua_bitreverse(data);
+
+	if (zhenhua->idx == ZHENHUA_MAX_LENGTH) {
+		zhenhua_process_packet(zhenhua);
+		zhenhua->idx = 0;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * zhenhua_disconnect() is the opposite of zhenhua_connect()
+ */
+
+static void zhenhua_disconnect(struct serio *serio)
+{
+	struct zhenhua *zhenhua = serio_get_drvdata(serio);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(zhenhua->dev);
+	kfree(zhenhua);
+}
+
+/*
+ * zhenhua_connect() is the routine that is called when someone adds a
+ * new serio device. It looks for the Twiddler, and if found, registers
+ * it as an input device.
+ */
+
+static int zhenhua_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct zhenhua *zhenhua;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+
+	zhenhua = kzalloc(sizeof(struct zhenhua), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!zhenhua || !input_dev)
+		goto fail1;
+
+	zhenhua->dev = input_dev;
+	snprintf(zhenhua->phys, sizeof(zhenhua->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "Zhen Hua 5-byte device";
+	input_dev->phys = zhenhua->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_ZHENHUA;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT(EV_ABS);
+	input_set_abs_params(input_dev, ABS_X, 50, 200, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 50, 200, 0, 0);
+	input_set_abs_params(input_dev, ABS_Z, 50, 200, 0, 0);
+	input_set_abs_params(input_dev, ABS_RZ, 50, 200, 0, 0);
+
+	serio_set_drvdata(serio, zhenhua);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(zhenhua->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(zhenhua);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id zhenhua_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_ZHENHUA,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, zhenhua_serio_ids);
+
+static struct serio_driver zhenhua_drv = {
+	.driver		= {
+		.name	= "zhenhua",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= zhenhua_serio_ids,
+	.interrupt	= zhenhua_interrupt,
+	.connect	= zhenhua_connect,
+	.disconnect	= zhenhua_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init zhenhua_init(void)
+{
+	return serio_register_driver(&zhenhua_drv);
+}
+
+static void __exit zhenhua_exit(void)
+{
+	serio_unregister_driver(&zhenhua_drv);
+}
+
+module_init(zhenhua_init);
+module_exit(zhenhua_exit);

drivers/input/keyboard/aaed2000_kbd.c

@@ -156,11 +156,15 @@ static int __devexit aaedkbd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:aaed2000-keyboard");
+
 static struct platform_driver aaedkbd_driver = {
 	.probe		= aaedkbd_probe,
 	.remove		= __devexit_p(aaedkbd_remove),
 	.driver		= {
 		.name	= "aaed2000-keyboard",
+		.owner	= THIS_MODULE,
 	},
 };
 

drivers/input/keyboard/bf54x-keys.c

@@ -312,6 +312,8 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev)
 
 	bfin_write_KPAD_CTL(bfin_read_KPAD_CTL() | KPAD_EN);
 
+	device_init_wakeup(&pdev->dev, 1);
+
 	printk(KERN_ERR DRV_NAME
 		": Blackfin BF54x Keypad registered IRQ %d\n", bf54x_kpad->irq);
 
@@ -354,12 +356,40 @@ static int __devexit bfin_kpad_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int bfin_kpad_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(bf54x_kpad->irq);
+
+	return 0;
+}
+
+static int bfin_kpad_resume(struct platform_device *pdev)
+{
+	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(bf54x_kpad->irq);
+
+	return 0;
+}
+#else
+# define bfin_kpad_suspend NULL
+# define bfin_kpad_resume  NULL
+#endif
+
 struct platform_driver bfin_kpad_device_driver = {
-	.probe		= bfin_kpad_probe,
-	.remove		= __devexit_p(bfin_kpad_remove),
 	.driver		= {
 		.name	= DRV_NAME,
-	}
+		.owner	= THIS_MODULE,
+	},
+	.probe		= bfin_kpad_probe,
+	.remove		= __devexit_p(bfin_kpad_remove),
+	.suspend	= bfin_kpad_suspend,
+	.resume		= bfin_kpad_resume,
 };
 
 static int __init bfin_kpad_init(void)
@@ -378,3 +408,4 @@ module_exit(bfin_kpad_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("Keypad driver for BF54x Processors");
+MODULE_ALIAS("platform:bf54x-keys");

drivers/input/keyboard/corgikbd.c

@@ -392,6 +392,7 @@ static struct platform_driver corgikbd_driver = {
 	.resume		= corgikbd_resume,
 	.driver		= {
 		.name	= "corgi-keyboard",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -411,3 +412,4 @@ module_exit(corgikbd_exit);
 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
 MODULE_DESCRIPTION("Corgi Keyboard Driver");
 MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:corgi-keyboard");

drivers/input/keyboard/gpio_keys.c

@@ -43,10 +43,11 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 
 			input_event(input, type, button->code, !!state);
 			input_sync(input);
+			return IRQ_HANDLED;
 		}
 	}
 
-	return IRQ_HANDLED;
+	return IRQ_NONE;
 }
 
 static int __devinit gpio_keys_probe(struct platform_device *pdev)
@@ -213,6 +214,7 @@ struct platform_driver gpio_keys_device_driver = {
 	.resume		= gpio_keys_resume,
 	.driver		= {
 		.name	= "gpio-keys",
+		.owner	= THIS_MODULE,
 	}
 };
 
@@ -232,3 +234,4 @@ module_exit(gpio_keys_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>");
 MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs");
+MODULE_ALIAS("platform:gpio-keys");

drivers/input/keyboard/jornada680_kbd.c

@@ -254,6 +254,7 @@ static int __devexit jornada680kbd_remove(struct platform_device *pdev)
 static struct platform_driver jornada680kbd_driver = {
 	.driver	= {
 		.name	= "jornada680_kbd",
+		.owner	= THIS_MODULE,
 	},
 	.probe	= jornada680kbd_probe,
 	.remove	= __devexit_p(jornada680kbd_remove),
@@ -275,3 +276,4 @@ module_exit(jornada680kbd_exit);
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver");
 MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:jornada680_kbd");

drivers/input/keyboard/jornada720_kbd.c

@@ -162,9 +162,13 @@ static int __devexit jornada720_kbd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:jornada720_kbd");
+
 static struct platform_driver jornada720_kbd_driver = {
 	.driver  = {
 		.name    = "jornada720_kbd",
+		.owner	= THIS_MODULE,
 	 },
 	.probe   = jornada720_kbd_probe,
 	.remove  = __devexit_p(jornada720_kbd_remove),

drivers/input/keyboard/locomokbd.c

 /*
- *  Copyright (c) 2005 John Lenz
+ * LoCoMo keyboard driver for Linux-based ARM PDAs:
+ * 	- SHARP Zaurus Collie (SL-5500)
+ * 	- SHARP Zaurus Poodle (SL-5600)
  *
+ * Copyright (c) 2005 John Lenz
  * Based on from xtkbd.c
- */
-
-/*
- * LoCoMo keyboard driver for Linux/ARM
- */
-
-/*
+ *
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -47,7 +45,8 @@ MODULE_LICENSE("GPL");
 #define KEY_CONTACT		KEY_F18
 #define KEY_CENTER		KEY_F15
 
-static unsigned char locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
+static const unsigned char
+locomokbd_keycode[LOCOMOKBD_NUMKEYS] __devinitconst = {
 	0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0,				/* 0 - 9 */
 	0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT,			/* 10 - 19 */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0,						/* 20 - 29 */
@@ -67,22 +66,21 @@ static unsigned char locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
 #define KB_COLS			8
 #define KB_ROWMASK(r)		(1 << (r))
 #define SCANCODE(c,r)		( ((c)<<4) + (r) + 1 )
-#define	NR_SCANCODES		128
 
 #define KB_DELAY		8
 #define SCAN_INTERVAL		(HZ/10)
-#define LOCOMOKBD_PRESSED	1
 
 struct locomokbd {
 	unsigned char keycode[LOCOMOKBD_NUMKEYS];
 	struct input_dev *input;
 	char phys[32];
 
-	struct locomo_dev *ldev;
 	unsigned long base;
 	spinlock_t lock;
 
 	struct timer_list timer;
+	unsigned long suspend_jiffies;
+	unsigned int count_cancel;
 };
 
 /* helper functions for reading the keyboard matrix */
@@ -128,7 +126,7 @@ static inline void locomokbd_reset_col(unsigned long membase, int col)
 /* Scan the hardware keyboard and push any changes up through the input layer */
 static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
 {
-	unsigned int row, col, rowd, scancode;
+	unsigned int row, col, rowd;
 	unsigned long flags;
 	unsigned int num_pressed;
 	unsigned long membase = locomokbd->base;
@@ -145,13 +143,33 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
 
 		rowd = ~locomo_readl(membase + LOCOMO_KIB);
 		for (row = 0; row < KB_ROWS; row++) {
+			unsigned int scancode, pressed, key;
+
 			scancode = SCANCODE(col, row);
-			if (rowd & KB_ROWMASK(row)) {
-				num_pressed += 1;
-				input_report_key(locomokbd->input, locomokbd->keycode[scancode], 1);
-			} else {
-				input_report_key(locomokbd->input, locomokbd->keycode[scancode], 0);
-			}
+			pressed = rowd & KB_ROWMASK(row);
+			key = locomokbd->keycode[scancode];
+
+			input_report_key(locomokbd->input, key, pressed);
+			if (likely(!pressed))
+				continue;
+
+			num_pressed++;
+
+			/* The "Cancel/ESC" key is labeled "On/Off" on
+			 * Collie and Poodle and should suspend the device
+			 * if it was pressed for more than a second. */
+			if (unlikely(key == KEY_ESC)) {
+				if (!time_after(jiffies,
+					locomokbd->suspend_jiffies + HZ))
+					continue;
+				if (locomokbd->count_cancel++
+					!= (HZ/SCAN_INTERVAL + 1))
+					continue;
+				input_event(locomokbd->input, EV_PWR,
+					KEY_SUSPEND, 1);
+				locomokbd->suspend_jiffies = jiffies;
+			} else
+				locomokbd->count_cancel = 0;
 		}
 		locomokbd_reset_col(membase, col);
 	}
@@ -162,6 +180,8 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
 	/* if any keys are pressed, enable the timer */
 	if (num_pressed)
 		mod_timer(&locomokbd->timer, jiffies + SCAN_INTERVAL);
+	else
+		locomokbd->count_cancel = 0;
 
 	spin_unlock_irqrestore(&locomokbd->lock, flags);
 }
@@ -186,10 +206,11 @@ static irqreturn_t locomokbd_interrupt(int irq, void *dev_id)
 static void locomokbd_timer_callback(unsigned long data)
 {
 	struct locomokbd *locomokbd = (struct locomokbd *) data;
+
 	locomokbd_scankeyboard(locomokbd);
 }
 
-static int locomokbd_probe(struct locomo_dev *dev)
+static int __devinit locomokbd_probe(struct locomo_dev *dev)
 {
 	struct locomokbd *locomokbd;
 	struct input_dev *input_dev;
@@ -211,7 +232,6 @@ static int locomokbd_probe(struct locomo_dev *dev)
 		goto err_free_mem;
 	}
 
-	locomokbd->ldev = dev;
 	locomo_set_drvdata(dev, locomokbd);
 
 	locomokbd->base = (unsigned long) dev->mapbase;
@@ -222,6 +242,8 @@ static int locomokbd_probe(struct locomo_dev *dev)
 	locomokbd->timer.function = locomokbd_timer_callback;
 	locomokbd->timer.data = (unsigned long) locomokbd;
 
+	locomokbd->suspend_jiffies = jiffies;
+
 	locomokbd->input = input_dev;
 	strcpy(locomokbd->phys, "locomokbd/input0");
 
@@ -233,9 +255,10 @@ static int locomokbd_probe(struct locomo_dev *dev)
 	input_dev->id.version = 0x0100;
 	input_dev->dev.parent = &dev->dev;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
+				BIT_MASK(EV_PWR);
 	input_dev->keycode = locomokbd->keycode;
-	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodesize = sizeof(locomokbd_keycode[0]);
 	input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode);
 
 	memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode));
@@ -268,7 +291,7 @@ static int locomokbd_probe(struct locomo_dev *dev)
 	return err;
 }
 
-static int locomokbd_remove(struct locomo_dev *dev)
+static int __devexit locomokbd_remove(struct locomo_dev *dev)
 {
 	struct locomokbd *locomokbd = locomo_get_drvdata(dev);
 
@@ -292,7 +315,7 @@ static struct locomo_driver keyboard_driver = {
 	},
 	.devid	= LOCOMO_DEVID_KEYBOARD,
 	.probe	= locomokbd_probe,
-	.remove	= locomokbd_remove,
+	.remove	= __devexit_p(locomokbd_remove),
 };
 
 static int __init locomokbd_init(void)

drivers/input/keyboard/omap-keypad.c

@@ -352,6 +352,9 @@ static int __init omap_kp_probe(struct platform_device *pdev)
 			}
 			omap_set_gpio_direction(row_gpios[row_idx], 1);
 		}
+	} else {
+		col_idx = 0;
+		row_idx = 0;
 	}
 
 	setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);
@@ -415,10 +418,10 @@ err4:
 err3:
 	device_remove_file(&pdev->dev, &dev_attr_enable);
 err2:
-	for (i = row_idx-1; i >=0; i--)
+	for (i = row_idx - 1; i >=0; i--)
 		omap_free_gpio(row_gpios[i]);
 err1:
-	for (i = col_idx-1; i >=0; i--)
+	for (i = col_idx - 1; i >=0; i--)
 		omap_free_gpio(col_gpios[i]);
 
 	kfree(omap_kp);
@@ -464,6 +467,7 @@ static struct platform_driver omap_kp_driver = {
 	.resume		= omap_kp_resume,
 	.driver		= {
 		.name	= "omap-keypad",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -484,3 +488,4 @@ module_exit(omap_kp_exit);
 MODULE_AUTHOR("Timo Teräs");
 MODULE_DESCRIPTION("OMAP Keypad Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-keypad");

drivers/input/keyboard/pxa27x_keypad.c

@@ -545,6 +545,9 @@ static int __devexit pxa27x_keypad_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-keypad");
+
 static struct platform_driver pxa27x_keypad_driver = {
 	.probe		= pxa27x_keypad_probe,
 	.remove		= __devexit_p(pxa27x_keypad_remove),
@@ -552,6 +555,7 @@ static struct platform_driver pxa27x_keypad_driver = {
 	.resume		= pxa27x_keypad_resume,
 	.driver		= {
 		.name	= "pxa27x-keypad",
+		.owner	= THIS_MODULE,
 	},
 };
 

drivers/input/keyboard/spitzkbd.c

@@ -494,3 +494,4 @@ module_exit(spitzkbd_exit);
 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
 MODULE_DESCRIPTION("Spitz Keyboard Driver");
 MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:spitz-keyboard");

drivers/input/keyboard/tosakbd.c

@@ -52,7 +52,7 @@ KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_
 struct tosakbd {
 	unsigned int keycode[ARRAY_SIZE(tosakbd_keycode)];
 	struct input_dev *input;
-
+	int suspended;
 	spinlock_t lock; /* protect kbd scanning */
 	struct timer_list timer;
 };
@@ -133,6 +133,9 @@ static void tosakbd_scankeyboard(struct platform_device *dev)
 
 	spin_lock_irqsave(&tosakbd->lock, flags);
 
+	if (tosakbd->suspended)
+		goto out;
+
 	for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) {
 		/*
 		 * Discharge the output driver capacitatance
@@ -174,6 +177,7 @@ static void tosakbd_scankeyboard(struct platform_device *dev)
 	if (num_pressed)
 		mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL);
 
+ out:
 	spin_unlock_irqrestore(&tosakbd->lock, flags);
 }
 
@@ -200,6 +204,7 @@ static irqreturn_t tosakbd_interrupt(int irq, void *__dev)
 static void tosakbd_timer_callback(unsigned long __dev)
 {
 	struct platform_device *dev = (struct platform_device *)__dev;
+
 	tosakbd_scankeyboard(dev);
 }
 
@@ -207,6 +212,13 @@ static void tosakbd_timer_callback(unsigned long __dev)
 static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct tosakbd *tosakbd = platform_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tosakbd->lock, flags);
+	PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT);
+	PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT);
+	tosakbd->suspended = 1;
+	spin_unlock_irqrestore(&tosakbd->lock, flags);
 
 	del_timer_sync(&tosakbd->timer);
 
@@ -215,6 +227,9 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
 
 static int tosakbd_resume(struct platform_device *dev)
 {
+	struct tosakbd *tosakbd = platform_get_drvdata(dev);
+
+	tosakbd->suspended = 0;
 	tosakbd_scankeyboard(dev);
 
 	return 0;
@@ -365,8 +380,8 @@ fail:
 	return error;
 }
 
-static int __devexit tosakbd_remove(struct platform_device *dev) {
-
+static int __devexit tosakbd_remove(struct platform_device *dev)
+{
 	int i;
 	struct tosakbd *tosakbd = platform_get_drvdata(dev);
 
@@ -394,6 +409,7 @@ static struct platform_driver tosakbd_driver = {
 	.resume		= tosakbd_resume,
 	.driver		= {
 		.name	= "tosa-keyboard",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -413,3 +429,4 @@ module_exit(tosakbd_exit);
 MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
 MODULE_DESCRIPTION("Tosa Keyboard Driver");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tosa-keyboard");

drivers/input/misc/cobalt_btns.c

@@ -148,6 +148,9 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:Cobalt buttons");
+
 static struct platform_driver cobalt_buttons_driver = {
 	.probe	= cobalt_buttons_probe,
 	.remove	= __devexit_p(cobalt_buttons_remove),

drivers/input/mouse/gpio_mouse.c

@@ -171,10 +171,14 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:gpio_mouse");
+
 struct platform_driver gpio_mouse_device_driver = {
 	.remove		= __devexit_p(gpio_mouse_remove),
 	.driver		= {
 		.name	= "gpio_mouse",
+		.owner	= THIS_MODULE,
 	}
 };
 

drivers/input/serio/Kconfig

@@ -88,6 +88,16 @@ config SERIO_RPCKBD
 	  To compile this driver as a module, choose M here: the
 	  module will be called rpckbd.
 
+config SERIO_AT32PSIF
+	tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
+	depends on AVR32
+	help
+	  Say Y here if you want to use the PSIF peripheral on AVR32 devices
+	  and connect a PS/2 keyboard and/or mouse to it.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called at32psif.
+
 config SERIO_AMBAKMI
 	tristate "AMBA KMI keyboard controller"
 	depends on ARM_AMBA

drivers/input/serio/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIO_CT82C710)	+= ct82c710.o
 obj-$(CONFIG_SERIO_RPCKBD)	+= rpckbd.o
 obj-$(CONFIG_SERIO_SA1111)	+= sa1111ps2.o
 obj-$(CONFIG_SERIO_AMBAKMI)	+= ambakmi.o
+obj-$(CONFIG_SERIO_AT32PSIF)	+= at32psif.o
 obj-$(CONFIG_SERIO_Q40KBD)	+= q40kbd.o
 obj-$(CONFIG_SERIO_GSCPS2)	+= gscps2.o
 obj-$(CONFIG_HP_SDC)		+= hp_sdc.o

drivers/input/serio/at32psif.c

+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Driver for the AT32AP700X PS/2 controller (PSIF).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/* PSIF register offsets */
+#define PSIF_CR				0x00
+#define PSIF_RHR			0x04
+#define PSIF_THR			0x08
+#define PSIF_SR				0x10
+#define PSIF_IER			0x14
+#define PSIF_IDR			0x18
+#define PSIF_IMR			0x1c
+#define PSIF_PSR			0x24
+
+/* Bitfields in control register. */
+#define PSIF_CR_RXDIS_OFFSET		1
+#define PSIF_CR_RXDIS_SIZE		1
+#define PSIF_CR_RXEN_OFFSET		0
+#define PSIF_CR_RXEN_SIZE		1
+#define PSIF_CR_SWRST_OFFSET		15
+#define PSIF_CR_SWRST_SIZE		1
+#define PSIF_CR_TXDIS_OFFSET		9
+#define PSIF_CR_TXDIS_SIZE		1
+#define PSIF_CR_TXEN_OFFSET		8
+#define PSIF_CR_TXEN_SIZE		1
+
+/* Bitfields in interrupt disable, enable, mask and status register. */
+#define PSIF_NACK_OFFSET		8
+#define PSIF_NACK_SIZE			1
+#define PSIF_OVRUN_OFFSET		5
+#define PSIF_OVRUN_SIZE			1
+#define PSIF_PARITY_OFFSET		9
+#define PSIF_PARITY_SIZE		1
+#define PSIF_RXRDY_OFFSET		4
+#define PSIF_RXRDY_SIZE			1
+#define PSIF_TXEMPTY_OFFSET		1
+#define PSIF_TXEMPTY_SIZE		1
+#define PSIF_TXRDY_OFFSET		0
+#define PSIF_TXRDY_SIZE			1
+
+/* Bitfields in prescale register. */
+#define PSIF_PSR_PRSCV_OFFSET		0
+#define PSIF_PSR_PRSCV_SIZE		12
+
+/* Bitfields in receive hold register. */
+#define PSIF_RHR_RXDATA_OFFSET		0
+#define PSIF_RHR_RXDATA_SIZE		8
+
+/* Bitfields in transmit hold register. */
+#define PSIF_THR_TXDATA_OFFSET		0
+#define PSIF_THR_TXDATA_SIZE		8
+
+/* Bit manipulation macros */
+#define PSIF_BIT(name)					\
+	(1 << PSIF_##name##_OFFSET)
+
+#define PSIF_BF(name, value)				\
+	(((value) & ((1 << PSIF_##name##_SIZE) - 1))	\
+	 << PSIF_##name##_OFFSET)
+
+#define PSIF_BFEXT(name, value)				\
+	(((value) >> PSIF_##name##_OFFSET)		\
+	 & ((1 << PSIF_##name##_SIZE) - 1))
+
+#define PSIF_BFINS(name, value, old)			\
+	(((old) & ~(((1 << PSIF_##name##_SIZE) - 1)	\
+		    << PSIF_##name##_OFFSET))		\
+	 | PSIF_BF(name, value))
+
+/* Register access macros */
+#define psif_readl(port, reg)				\
+	__raw_readl((port)->regs + PSIF_##reg)
+
+#define psif_writel(port, reg, value)			\
+	__raw_writel((value), (port)->regs + PSIF_##reg)
+
+struct psif {
+	struct platform_device	*pdev;
+	struct clk		*pclk;
+	struct serio		*io;
+	void __iomem		*regs;
+	unsigned int		irq;
+	unsigned int		open;
+	/* Prevent concurrent writes to PSIF THR. */
+	spinlock_t		lock;
+};
+
+static irqreturn_t psif_interrupt(int irq, void *_ptr)
+{
+	struct psif *psif = _ptr;
+	int retval = IRQ_NONE;
+	unsigned int io_flags = 0;
+	unsigned long status;
+
+	status = psif_readl(psif, SR);
+
+	if (status & PSIF_BIT(RXRDY)) {
+		unsigned char val = (unsigned char) psif_readl(psif, RHR);
+
+		if (status & PSIF_BIT(PARITY))
+			io_flags |= SERIO_PARITY;
+		if (status & PSIF_BIT(OVRUN))
+			dev_err(&psif->pdev->dev, "overrun read error\n");
+
+		serio_interrupt(psif->io, val, io_flags);
+
+		retval = IRQ_HANDLED;
+	}
+
+	return retval;
+}
+
+static int psif_write(struct serio *io, unsigned char val)
+{
+	struct psif *psif = io->port_data;
+	unsigned long flags;
+	int timeout = 10;
+	int retval = 0;
+
+	spin_lock_irqsave(&psif->lock, flags);
+
+	while (!(psif_readl(psif, SR) & PSIF_BIT(TXEMPTY)) && timeout--)
+		msleep(10);
+
+	if (timeout >= 0) {
+		psif_writel(psif, THR, val);
+	} else {
+		dev_dbg(&psif->pdev->dev, "timeout writing to THR\n");
+		retval = -EBUSY;
+	}
+
+	spin_unlock_irqrestore(&psif->lock, flags);
+
+	return retval;
+}
+
+static int psif_open(struct serio *io)
+{
+	struct psif *psif = io->port_data;
+	int retval;
+
+	retval = clk_enable(psif->pclk);
+	if (retval)
+		goto out;
+
+	psif_writel(psif, CR, PSIF_BIT(CR_TXEN) | PSIF_BIT(CR_RXEN));
+	psif_writel(psif, IER, PSIF_BIT(RXRDY));
+
+	psif->open = 1;
+out:
+	return retval;
+}
+
+static void psif_close(struct serio *io)
+{
+	struct psif *psif = io->port_data;
+
+	psif->open = 0;
+
+	psif_writel(psif, IDR, ~0UL);
+	psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
+
+	clk_disable(psif->pclk);
+}
+
+static void psif_set_prescaler(struct psif *psif)
+{
+	unsigned long prscv;
+	unsigned long rate = clk_get_rate(psif->pclk);
+
+	/* PRSCV = Pulse length (100 us) * PSIF module frequency. */
+	prscv = 100 * (rate / 1000000UL);
+
+	if (prscv > ((1<<PSIF_PSR_PRSCV_SIZE) - 1)) {
+		prscv = (1<<PSIF_PSR_PRSCV_SIZE) - 1;
+		dev_dbg(&psif->pdev->dev, "pclk too fast, "
+				"prescaler set to max\n");
+	}
+
+	clk_enable(psif->pclk);
+	psif_writel(psif, PSR, prscv);
+	clk_disable(psif->pclk);
+}
+
+static int __init psif_probe(struct platform_device *pdev)
+{
+	struct resource *regs;
+	struct psif *psif;
+	struct serio *io;
+	struct clk *pclk;
+	int irq;
+	int ret;
+
+	psif = kzalloc(sizeof(struct psif), GFP_KERNEL);
+	if (!psif) {
+		dev_dbg(&pdev->dev, "out of memory\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+	psif->pdev = pdev;
+
+	io = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!io) {
+		dev_dbg(&pdev->dev, "out of memory\n");
+		ret = -ENOMEM;
+		goto out_free_psif;
+	}
+	psif->io = io;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_dbg(&pdev->dev, "no mmio resources defined\n");
+		ret = -ENOMEM;
+		goto out_free_io;
+	}
+
+	psif->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!psif->regs) {
+		ret = -ENOMEM;
+		dev_dbg(&pdev->dev, "could not map I/O memory\n");
+		goto out_free_io;
+	}
+
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(pclk)) {
+		dev_dbg(&pdev->dev, "could not get peripheral clock\n");
+		ret = PTR_ERR(pclk);
+		goto out_iounmap;
+	}
+	psif->pclk = pclk;
+
+	/* Reset the PSIF to enter at a known state. */
+	ret = clk_enable(pclk);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not enable pclk\n");
+		goto out_put_clk;
+	}
+	psif_writel(psif, CR, PSIF_BIT(CR_SWRST));
+	clk_disable(pclk);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_dbg(&pdev->dev, "could not get irq\n");
+		ret = -ENXIO;
+		goto out_put_clk;
+	}
+	ret = request_irq(irq, psif_interrupt, IRQF_SHARED, "at32psif", psif);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
+		goto out_put_clk;
+	}
+	psif->irq = irq;
+
+	io->id.type	= SERIO_8042;
+	io->write	= psif_write;
+	io->open	= psif_open;
+	io->close	= psif_close;
+	snprintf(io->name, sizeof(io->name), "AVR32 PS/2 port%d", pdev->id);
+	snprintf(io->phys, sizeof(io->phys), "at32psif/serio%d", pdev->id);
+	io->port_data	= psif;
+	io->dev.parent	= &pdev->dev;
+
+	psif_set_prescaler(psif);
+
+	spin_lock_init(&psif->lock);
+	serio_register_port(psif->io);
+	platform_set_drvdata(pdev, psif);
+
+	dev_info(&pdev->dev, "Atmel AVR32 PSIF PS/2 driver on 0x%08x irq %d\n",
+			(int)psif->regs, psif->irq);
+
+	return 0;
+
+out_put_clk:
+	clk_put(psif->pclk);
+out_iounmap:
+	iounmap(psif->regs);
+out_free_io:
+	kfree(io);
+out_free_psif:
+	kfree(psif);
+out:
+	return ret;
+}
+
+static int __exit psif_remove(struct platform_device *pdev)
+{
+	struct psif *psif = platform_get_drvdata(pdev);
+
+	psif_writel(psif, IDR, ~0UL);
+	psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
+
+	serio_unregister_port(psif->io);
+	iounmap(psif->regs);
+	free_irq(psif->irq, psif);
+	clk_put(psif->pclk);
+	kfree(psif);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int psif_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct psif *psif = platform_get_drvdata(pdev);
+
+	if (psif->open) {
+		psif_writel(psif, CR, PSIF_BIT(CR_RXDIS) | PSIF_BIT(CR_TXDIS));
+		clk_disable(psif->pclk);
+	}
+
+	return 0;
+}
+
+static int psif_resume(struct platform_device *pdev)
+{
+	struct psif *psif = platform_get_drvdata(pdev);
+
+	if (psif->open) {
+		clk_enable(psif->pclk);
+		psif_set_prescaler(psif);
+		psif_writel(psif, CR, PSIF_BIT(CR_RXEN) | PSIF_BIT(CR_TXEN));
+	}
+
+	return 0;
+}
+#else
+#define psif_suspend	NULL
+#define psif_resume	NULL
+#endif
+
+static struct platform_driver psif_driver = {
+	.remove		= __exit_p(psif_remove),
+	.driver		= {
+		.name	= "atmel_psif",
+	},
+	.suspend	= psif_suspend,
+	.resume		= psif_resume,
+};
+
+static int __init psif_init(void)
+{
+	return platform_driver_probe(&psif_driver, psif_probe);
+}
+
+static void __exit psif_exit(void)
+{
+	platform_driver_unregister(&psif_driver);
+}
+
+module_init(psif_init);
+module_exit(psif_exit);
+
+MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
+MODULE_LICENSE("GPL");

drivers/input/serio/i8042-x86ia64io.h

@@ -370,10 +370,10 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
 	if (pnp_irq_valid(dev,0))
 		i8042_pnp_kbd_irq = pnp_irq(dev, 0);
 
-	strncpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name));
+	strlcpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name));
 	if (strlen(pnp_dev_name(dev))) {
-		strncat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name));
-		strncat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
+		strlcat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name));
+		strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
 	}
 
 	i8042_pnp_kbd_devices++;
@@ -391,10 +391,10 @@ static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *
 	if (pnp_irq_valid(dev, 0))
 		i8042_pnp_aux_irq = pnp_irq(dev, 0);
 
-	strncpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name));
+	strlcpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name));
 	if (strlen(pnp_dev_name(dev))) {
-		strncat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name));
-		strncat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
+		strlcat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name));
+		strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
 	}
 
 	i8042_pnp_aux_devices++;

drivers/input/serio/rpckbd.c

@@ -45,6 +45,7 @@
 MODULE_AUTHOR("Vojtech Pavlik, Russell King");
 MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kart");
 
 static int rpckbd_write(struct serio *port, unsigned char val)
 {
@@ -140,6 +141,7 @@ static struct platform_driver rpckbd_driver = {
 	.remove		= __devexit_p(rpckbd_remove),
 	.driver		= {
 		.name	= "kart",
+		.owner	= THIS_MODULE,
 	},
 };
 

drivers/input/tablet/Kconfig

@@ -25,14 +25,14 @@ config TABLET_USB_ACECAD
 	  module will be called acecad.
 
 config TABLET_USB_AIPTEK
-	tristate "Aiptek 6000U/8000U tablet support (USB)"
+	tristate "Aiptek 6000U/8000U and Genius G_PEN tablet support (USB)"
 	depends on USB_ARCH_HAS_HCD
 	select USB
 	help
-	  Say Y here if you want to use the USB version of the Aiptek 6000U
-	  or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
+	  Say Y here if you want to use the USB version of the Aiptek 6000U,
+	  Aiptek 8000U or Genius G-PEN 560 tablet.  Make sure to say Y to
+	  "Mouse support" (CONFIG_INPUT_MOUSEDEV) and/or "Event interface
+	  support" (CONFIG_INPUT_EVDEV) as well.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called aiptek.

drivers/input/tablet/aiptek.c

@@ -184,6 +184,7 @@
  */
 
 #define USB_VENDOR_ID_AIPTEK				0x08ca
+#define USB_VENDOR_ID_KYE				0x0458
 #define USB_REQ_GET_REPORT				0x01
 #define USB_REQ_SET_REPORT				0x09
 
@@ -832,6 +833,7 @@ static const struct usb_device_id aiptek_ids[] = {
 	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
 	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
 	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
+	{USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)},
 	{}
 };
 

drivers/input/tablet/wacom.h

@@ -101,8 +101,11 @@ struct wacom {
 	dma_addr_t data_dma;
 	struct input_dev *dev;
 	struct usb_device *usbdev;
+	struct usb_interface *intf;
 	struct urb *irq;
 	struct wacom_wac * wacom_wac;
+	struct mutex lock;
+	int open:1;
 	char phys[32];
 };
 

drivers/input/tablet/wacom_sys.c

@@ -70,6 +70,7 @@ static void wacom_sys_irq(struct urb *urb)
 		input_sync(get_input_dev(&wcombo));
 
  exit:
+	usb_mark_last_busy(wacom->usbdev);
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
@@ -124,10 +125,25 @@ static int wacom_open(struct input_dev *dev)
 {
 	struct wacom *wacom = input_get_drvdata(dev);
 
+	mutex_lock(&wacom->lock);
+
 	wacom->irq->dev = wacom->usbdev;
-	if (usb_submit_urb(wacom->irq, GFP_KERNEL))
+
+	if (usb_autopm_get_interface(wacom->intf) < 0) {
+		mutex_unlock(&wacom->lock);
 		return -EIO;
+	}
+
+	if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
+		usb_autopm_put_interface(wacom->intf);
+		mutex_unlock(&wacom->lock);
+		return -EIO;
+	}
+
+	wacom->open = 1;
+	wacom->intf->needs_remote_wakeup = 1;
 
+	mutex_unlock(&wacom->lock);
 	return 0;
 }
 
@@ -135,7 +151,11 @@ static void wacom_close(struct input_dev *dev)
 {
 	struct wacom *wacom = input_get_drvdata(dev);
 
+	mutex_lock(&wacom->lock);
 	usb_kill_urb(wacom->irq);
+	wacom->open = 0;
+	wacom->intf->needs_remote_wakeup = 0;
+	mutex_unlock(&wacom->lock);
 }
 
 void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -243,6 +263,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	wacom->usbdev = dev;
 	wacom->dev = input_dev;
+	wacom->intf = intf;
+	mutex_init(&wacom->lock);
 	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
 	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
 
@@ -304,23 +326,57 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 static void wacom_disconnect(struct usb_interface *intf)
 {
-	struct wacom *wacom = usb_get_intfdata (intf);
+	struct wacom *wacom = usb_get_intfdata(intf);
 
 	usb_set_intfdata(intf, NULL);
-	if (wacom) {
-		usb_kill_urb(wacom->irq);
-		input_unregister_device(wacom->dev);
-		usb_free_urb(wacom->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
-		kfree(wacom->wacom_wac);
-		kfree(wacom);
-	}
+
+	usb_kill_urb(wacom->irq);
+	input_unregister_device(wacom->dev);
+	usb_free_urb(wacom->irq);
+	usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+	kfree(wacom->wacom_wac);
+	kfree(wacom);
+}
+
+static int wacom_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct wacom *wacom = usb_get_intfdata(intf);
+
+	mutex_lock(&wacom->lock);
+	usb_kill_urb(wacom->irq);
+	mutex_unlock(&wacom->lock);
+
+	return 0;
+}
+
+static int wacom_resume(struct usb_interface *intf)
+{
+	struct wacom *wacom = usb_get_intfdata(intf);
+	int rv;
+
+	mutex_lock(&wacom->lock);
+	if (wacom->open)
+		rv = usb_submit_urb(wacom->irq, GFP_NOIO);
+	else
+		rv = 0;
+	mutex_unlock(&wacom->lock);
+
+	return rv;
+}
+
+static int wacom_reset_resume(struct usb_interface *intf)
+{
+	return wacom_resume(intf);
 }
 
 static struct usb_driver wacom_driver = {
 	.name =		"wacom",
 	.probe =	wacom_probe,
 	.disconnect =	wacom_disconnect,
+	.suspend =	wacom_suspend,
+	.resume =	wacom_resume,
+	.reset_resume =	wacom_reset_resume,
+	.supports_autosuspend = 1,
 };
 
 static int __init wacom_init(void)

drivers/input/tablet/wacom_wac.c

@@ -649,6 +649,7 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Intuos3 6x11",  10, 54204, 31750, 1023, 63, INTUOS3 },
 	{ "Wacom Intuos3 4x6",   10, 31496, 19685, 1023, 63, INTUOS3S },
 	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 63, CINTIQ },
+	{ "Wacom Cintiq 20WSX",  10, 86680, 54180, 1023, 63, WACOM_BEE },
 	{ "Wacom Cintiq 12WX",   10, 53020, 33440, 1023, 63, WACOM_BEE },
 	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
 	{ }
@@ -702,6 +703,7 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
 	{ }

drivers/input/touchscreen/Kconfig

@@ -185,6 +185,59 @@ config TOUCHSCREEN_UCB1400
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_ts.
 
+config TOUCHSCREEN_WM97XX
+	tristate "Support for WM97xx AC97 touchscreen controllers"
+	depends on AC97_BUS
+	help
+	  Say Y here if you have a Wolfson Microelectronics WM97xx
+	  touchscreen connected to your system. Note that this option
+	  only enables core driver, you will also need to select
+	  support for appropriate chip below.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wm97xx-ts.
+
+config TOUCHSCREEN_WM9705
+	bool "WM9705 Touchscreen interface support"
+	depends on TOUCHSCREEN_WM97XX
+	help
+	  Say Y here if you have a Wolfson Microelectronics WM9705
+	  touchscreen controller connected to your system.
+
+	  If unsure, say N.
+
+config TOUCHSCREEN_WM9712
+	bool "WM9712 Touchscreen interface support"
+	depends on TOUCHSCREEN_WM97XX
+	help
+	  Say Y here if you have a Wolfson Microelectronics WM9712
+	  touchscreen controller connected to your system.
+
+	  If unsure, say N.
+
+config TOUCHSCREEN_WM9713
+	bool "WM9713 Touchscreen interface support"
+	depends on TOUCHSCREEN_WM97XX
+	help
+	  Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
+	  controller connected to your system.
+
+	  If unsure, say N.
+
+config TOUCHSCREEN_WM97XX_MAINSTONE
+	tristate "WM97xx Mainstone accelerated touch"
+	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
+	help
+	  Say Y here for support for streaming mode with WM97xx touchscreens
+	  on Mainstone systems.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mainstone-wm97xx.
+
 config TOUCHSCREEN_USB_COMPOSITE
 	tristate "USB Touchscreen Driver"
 	depends on USB_ARCH_HAS_HCD

drivers/input/touchscreen/Makefile

@@ -4,6 +4,8 @@
 
 # Each configuration option enables a list of files.
 
+wm97xx-ts-y := wm97xx-core.o
+
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
@@ -19,3 +21,8 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o

drivers/input/touchscreen/ads7846.c

@@ -87,6 +87,7 @@ struct ads7846 {
 #endif
 
 	u16			model;
+	u16			vref_mv;
 	u16			vref_delay_usecs;
 	u16			x_plate_ohms;
 	u16			pressure_max;
@@ -184,9 +185,6 @@ struct ads7846 {
  * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
  * ads7846 lets that pin be unconnected, to use internal vREF.
  */
-static unsigned vREF_mV;
-module_param(vREF_mV, uint, 0);
-MODULE_PARM_DESC(vREF_mV, "external vREF voltage, in milliVolts");
 
 struct ser_req {
 	u8			ref_on;
@@ -213,7 +211,6 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	struct ads7846		*ts = dev_get_drvdata(dev);
 	struct ser_req		*req = kzalloc(sizeof *req, GFP_KERNEL);
 	int			status;
-	int			uninitialized_var(sample);
 	int			use_internal;
 
 	if (!req)
@@ -270,13 +267,13 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 
 	if (status == 0) {
 		/* on-wire is a must-ignore bit, a BE12 value, then padding */
-		sample = be16_to_cpu(req->sample);
-		sample = sample >> 3;
-		sample &= 0x0fff;
+		status = be16_to_cpu(req->sample);
+		status = status >> 3;
+		status &= 0x0fff;
 	}
 
 	kfree(req);
-	return status ? status : sample;
+	return status;
 }
 
 #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
@@ -317,7 +314,7 @@ static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
 	unsigned retval = v;
 
 	/* external resistors may scale vAUX into 0..vREF */
-	retval *= vREF_mV;
+	retval *= ts->vref_mv;
 	retval = retval >> 12;
 	return retval;
 }
@@ -375,14 +372,14 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
 	/* hwmon sensors need a reference voltage */
 	switch (ts->model) {
 	case 7846:
-		if (!vREF_mV) {
+		if (!ts->vref_mv) {
 			dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
-			vREF_mV = 2500;
+			ts->vref_mv = 2500;
 		}
 		break;
 	case 7845:
 	case 7843:
-		if (!vREF_mV) {
+		if (!ts->vref_mv) {
 			dev_warn(&spi->dev,
 				"external vREF for ADS%d not specified\n",
 				ts->model);
@@ -875,6 +872,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	ts->spi = spi;
 	ts->input = input_dev;
+	ts->vref_mv = pdata->vref_mv;
 
 	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	ts->timer.function = ads7846_timer;

drivers/input/touchscreen/corgi_ts.c

@@ -361,6 +361,7 @@ static struct platform_driver corgits_driver = {
 	.resume		= corgits_resume,
 	.driver		= {
 		.name	= "corgi-ts",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -380,3 +381,4 @@ module_exit(corgits_exit);
 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
 MODULE_DESCRIPTION("Corgi TouchScreen Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:corgi-ts");

drivers/input/touchscreen/jornada720_ts.c

@@ -160,11 +160,15 @@ static int __devexit jornada720_ts_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:jornada_ts");
+
 static struct platform_driver jornada720_ts_driver = {
 	.probe		= jornada720_ts_probe,
 	.remove		= __devexit_p(jornada720_ts_remove),
 	.driver		= {
 		.name	= "jornada_ts",
+		.owner	= THIS_MODULE,
 	},
 };
 

drivers/input/touchscreen/mainstone-wm97xx.c

+/*
+ * mainstone-wm97xx.c  --  Mainstone Continuous Touch screen driver for
+ *                         Wolfson WM97xx AC97 Codecs.
+ *
+ * Copyright 2004, 2007 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Notes:
+ *     This is a wm97xx extended touch driver to capture touch
+ *     data in a continuous manner on the Intel XScale archictecture
+ *
+ *  Features:
+ *       - codecs supported:- WM9705, WM9712, WM9713
+ *       - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/wm97xx.h>
+#include <linux/io.h>
+#include <asm/arch/pxa-regs.h>
+
+#define VERSION		"0.13"
+
+struct continuous {
+	u16 id;    /* codec id */
+	u8 code;   /* continuous code */
+	u8 reads;  /* number of coord reads per read cycle */
+	u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+	{WM9705_ID2, 0, WM_READS(94), 94},
+	{WM9705_ID2, 1, WM_READS(188), 188},
+	{WM9705_ID2, 2, WM_READS(375), 375},
+	{WM9705_ID2, 3, WM_READS(750), 750},
+	{WM9712_ID2, 0, WM_READS(94), 94},
+	{WM9712_ID2, 1, WM_READS(188), 188},
+	{WM9712_ID2, 2, WM_READS(375), 375},
+	{WM9712_ID2, 3, WM_READS(750), 750},
+	{WM9713_ID2, 0, WM_READS(94), 94},
+	{WM9713_ID2, 1, WM_READS(120), 120},
+	{WM9713_ID2, 2, WM_READS(154), 154},
+	{WM9713_ID2, 3, WM_READS(188), 188},
+};
+
+/* continuous speed index */
+static int sp_idx;
+static u16 last, tries;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 200;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pen down detection.
+ *
+ * This driver can either poll or use an interrupt to indicate a pen down
+ * event. If the irq request fails then it will fall back to polling mode.
+ */
+static int pen_int;
+module_param(pen_int, int, 0);
+MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+
+/* flush AC97 slot 5 FIFO on pxa machines */
+#ifdef CONFIG_PXA27x
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+	schedule_timeout_uninterruptible(1);
+
+	while (MISR & (1 << 2))
+		MODR;
+}
+#else
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+	int count = 16;
+	schedule_timeout_uninterruptible(1);
+
+	while (count < 16) {
+		MODR;
+		count--;
+	}
+}
+#endif
+
+static int wm97xx_acc_pen_down(struct wm97xx *wm)
+{
+	u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
+	int reads = 0;
+
+	/* When the AC97 queue has been drained we need to allow time
+	 * to buffer up samples otherwise we end up spinning polling
+	 * for samples.  The controller can't have a suitably low
+	 * threashold set to use the notifications it gives.
+	 */
+	schedule_timeout_uninterruptible(1);
+
+	if (tries > 5) {
+		tries = 0;
+		return RC_PENUP;
+	}
+
+	x = MODR;
+	if (x == last) {
+		tries++;
+		return RC_AGAIN;
+	}
+	last = x;
+	do {
+		if (reads)
+			x = MODR;
+		y = MODR;
+		if (pressure)
+			p = MODR;
+
+		/* are samples valid */
+		if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
+		    (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
+		    (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+			goto up;
+
+		/* coordinate is good */
+		tries = 0;
+		input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
+		input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
+		input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+		input_sync(wm->input_dev);
+		reads++;
+	} while (reads < cinfo[sp_idx].reads);
+up:
+	return RC_PENDOWN | RC_AGAIN;
+}
+
+static int wm97xx_acc_startup(struct wm97xx *wm)
+{
+	int idx = 0;
+
+	/* check we have a codec */
+	if (wm->ac97 == NULL)
+		return -ENODEV;
+
+	/* Go you big red fire engine */
+	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+		if (wm->id != cinfo[idx].id)
+			continue;
+		sp_idx = idx;
+		if (cont_rate <= cinfo[idx].speed)
+			break;
+	}
+	wm->acc_rate = cinfo[sp_idx].code;
+	wm->acc_slot = ac97_touch_slot;
+	dev_info(wm->dev,
+		 "mainstone accelerated touchscreen driver, %d samples/sec\n",
+		 cinfo[sp_idx].speed);
+
+	/* codec specific irq config */
+	if (pen_int) {
+		switch (wm->id) {
+		case WM9705_ID2:
+			wm->pen_irq = IRQ_GPIO(4);
+			set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
+			break;
+		case WM9712_ID2:
+		case WM9713_ID2:
+			/* enable pen down interrupt */
+			/* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
+			wm->pen_irq = MAINSTONE_AC97_IRQ;
+			wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+					   WM97XX_GPIO_POL_HIGH,
+					   WM97XX_GPIO_STICKY,
+					   WM97XX_GPIO_WAKE);
+			wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
+					   WM97XX_GPIO_POL_HIGH,
+					   WM97XX_GPIO_NOTSTICKY,
+					   WM97XX_GPIO_NOWAKE);
+			break;
+		default:
+			dev_err(wm->dev,
+				"pen down irq not supported on this device\n");
+			pen_int = 0;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void wm97xx_acc_shutdown(struct wm97xx *wm)
+{
+	/* codec specific deconfig */
+	if (pen_int) {
+		switch (wm->id & 0xffff) {
+		case WM9705_ID2:
+			wm->pen_irq = 0;
+			break;
+		case WM9712_ID2:
+		case WM9713_ID2:
+			/* disable interrupt */
+			wm->pen_irq = 0;
+			break;
+		}
+	}
+}
+
+static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+	if (enable)
+		enable_irq(wm->pen_irq);
+	else
+		disable_irq(wm->pen_irq);
+}
+
+static struct wm97xx_mach_ops mainstone_mach_ops = {
+	.acc_enabled = 1,
+	.acc_pen_up = wm97xx_acc_pen_up,
+	.acc_pen_down = wm97xx_acc_pen_down,
+	.acc_startup = wm97xx_acc_startup,
+	.acc_shutdown = wm97xx_acc_shutdown,
+	.irq_enable = wm97xx_irq_enable,
+	.irq_gpio = WM97XX_GPIO_2,
+};
+
+static int mainstone_wm97xx_probe(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+
+	return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
+}
+
+static int mainstone_wm97xx_remove(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+
+	wm97xx_unregister_mach_ops(wm);
+	return 0;
+}
+
+static struct platform_driver mainstone_wm97xx_driver = {
+	.probe = mainstone_wm97xx_probe,
+	.remove = mainstone_wm97xx_remove,
+	.driver = {
+		.name = "wm97xx-touch",
+	},
+};
+
+static int __init mainstone_wm97xx_init(void)
+{
+	return platform_driver_register(&mainstone_wm97xx_driver);
+}
+
+static void __exit mainstone_wm97xx_exit(void)
+{
+	platform_driver_unregister(&mainstone_wm97xx_driver);
+}
+
+module_init(mainstone_wm97xx_init);
+module_exit(mainstone_wm97xx_exit);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
+MODULE_LICENSE("GPL");

drivers/input/touchscreen/ucb1400_ts.c

@@ -427,10 +427,6 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
 	unsigned long mask, timeout;
 
 	mask = probe_irq_on();
-	if (!mask) {
-		probe_irq_off(mask);
-		return -EBUSY;
-	}
 
 	/* Enable the ADC interrupt. */
 	ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);

drivers/input/touchscreen/usbtouchscreen.c

@@ -396,9 +396,12 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 {
 	struct usb_device *dev = usbtouch->udev;
-	int ret;
-	unsigned char buf[2];
+	int ret = -ENOMEM;
+	unsigned char *buf;
 
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		goto err_nobuf;
 	/* reset */
 	buf[0] = buf[1] = 0xFF;
 	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
@@ -406,9 +409,11 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 	                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
 	if (ret < 0)
-		return ret;
-	if (buf[0] != 0x06 || buf[1] != 0x00)
-		return -ENODEV;
+		goto err_out;
+	if (buf[0] != 0x06 || buf[1] != 0x00) {
+		ret = -ENODEV;
+		goto err_out;
+	}
 
 	/* set coordinate output rate */
 	buf[0] = buf[1] = 0xFF;
@@ -417,20 +422,22 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 	                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
 	if (ret < 0)
-		return ret;
+		goto err_out;
 	if ((buf[0] != 0x06 || buf[1] != 0x00) &&
-	    (buf[0] != 0x15 || buf[1] != 0x01))
-		return -ENODEV;
+	    (buf[0] != 0x15 || buf[1] != 0x01)) {
+		ret = -ENODEV;
+		goto err_out;
+	}
 
 	/* start sending data */
 	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
 	                      TSC10_CMD_DATA1,
 	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (ret < 0)
-		return ret;
-
-	return 0;
+err_out:
+	kfree(buf);
+err_nobuf:
+	return ret;
 }
 
 

drivers/input/touchscreen/wm9705.c

+/*
+ * wm9705.c  --  Codec driver for Wolfson WM9705 AC97 Codec.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *                   Russell King <rmk@arm.linux.org.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/wm97xx.h>
+
+#define TS_NAME			"wm97xx"
+#define WM9705_VERSION		"1.00"
+#define DEFAULT_PRESSURE	0xb0c0
+
+/*
+ * Module parameters
+ */
+
+/*
+ * Set current used for pressure measurement.
+ *
+ * Set pil = 2 to use 400uA
+ *     pil = 1 to use 200uA and
+ *     pil = 0 to disable pressure measurement.
+ *
+ * This is used to increase the range of values returned by the adc
+ * when measureing touchpanel pressure.
+ */
+static int pil;
+module_param(pil, int, 0);
+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
+
+/*
+ * Set threshold for pressure measurement.
+ *
+ * Pen down pressure below threshold is ignored.
+ */
+static int pressure = DEFAULT_PRESSURE & 0xfff;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
+
+/*
+ * Set adc sample delay.
+ *
+ * For accurate touchpanel measurements, some settling time may be
+ * required between the switch matrix applying a voltage across the
+ * touchpanel plate and the ADC sampling the signal.
+ *
+ * This delay can be set by setting delay = n, where n is the array
+ * position of the delay in the array delay_table below.
+ * Long delays > 1ms are supported for completeness, but are not
+ * recommended.
+ */
+static int delay = 4;
+module_param(delay, int, 0);
+MODULE_PARM_DESC(delay, "Set adc sample delay.");
+
+/*
+ * Pen detect comparator threshold.
+ *
+ * 0 to Vmid in 15 steps, 0 = use zero power comparator with Vmid threshold
+ * i.e. 1 =  Vmid/15 threshold
+ *      15 =  Vmid/1 threshold
+ *
+ * Adjust this value if you are having problems with pen detect not
+ * detecting any down events.
+ */
+static int pdd = 8;
+module_param(pdd, int, 0);
+MODULE_PARM_DESC(pdd, "Set pen detect comparator threshold");
+
+/*
+ * Set adc mask function.
+ *
+ * Sources of glitch noise, such as signals driving an LCD display, may feed
+ * through to the touch screen plates and affect measurement accuracy. In
+ * order to minimise this, a signal may be applied to the MASK pin to delay or
+ * synchronise the sampling.
+ *
+ * 0 = No delay or sync
+ * 1 = High on pin stops conversions
+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
+ * 3 = Edge triggered, edge on pin starts conversion after delay param
+ */
+static int mask;
+module_param(mask, int, 0);
+MODULE_PARM_DESC(mask, "Set adc mask function.");
+
+/*
+ * ADC sample delay times in uS
+ */
+static const int delay_table[] = {
+	21,    /* 1 AC97 Link frames */
+	42,    /* 2                  */
+	84,    /* 4                  */
+	167,   /* 8                  */
+	333,   /* 16                 */
+	667,   /* 32                 */
+	1000,  /* 48                 */
+	1333,  /* 64                 */
+	2000,  /* 96                 */
+	2667,  /* 128                */
+	3333,  /* 160                */
+	4000,  /* 192                */
+	4667,  /* 224                */
+	5333,  /* 256                */
+	6000,  /* 288                */
+	0      /* No delay, switch matrix always on */
+};
+
+/*
+ * Delay after issuing a POLL command.
+ *
+ * The delay is 3 AC97 link frames + the touchpanel settling delay
+ */
+static inline void poll_delay(int d)
+{
+	udelay(3 * AC97_LINK_FRAME + delay_table[d]);
+}
+
+/*
+ * set up the physical settings of the WM9705
+ */
+static void wm9705_phy_init(struct wm97xx *wm)
+{
+	u16 dig1 = 0, dig2 = WM97XX_RPR;
+
+	/*
+	* mute VIDEO and AUX as they share X and Y touchscreen
+	* inputs on the WM9705
+	*/
+	wm97xx_reg_write(wm, AC97_AUX, 0x8000);
+	wm97xx_reg_write(wm, AC97_VIDEO, 0x8000);
+
+	/* touchpanel pressure current*/
+	if (pil == 2) {
+		dig2 |= WM9705_PIL;
+		dev_dbg(wm->dev,
+			"setting pressure measurement current to 400uA.");
+	} else if (pil)
+		dev_dbg(wm->dev,
+			"setting pressure measurement current to 200uA.");
+	if (!pil)
+		pressure = 0;
+
+	/* polling mode sample settling delay */
+	if (delay != 4) {
+		if (delay < 0 || delay > 15) {
+			dev_dbg(wm->dev, "supplied delay out of range.");
+			delay = 4;
+		}
+	}
+	dig1 &= 0xff0f;
+	dig1 |= WM97XX_DELAY(delay);
+	dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.",
+		delay_table[delay]);
+
+	/* WM9705 pdd */
+	dig2 |= (pdd & 0x000f);
+	dev_dbg(wm->dev, "setting pdd to Vmid/%d", 1 - (pdd & 0x000f));
+
+	/* mask */
+	dig2 |= ((mask & 0x3) << 4);
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
+}
+
+static void wm9705_dig_enable(struct wm97xx *wm, int enable)
+{
+	if (enable) {
+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
+				 wm->dig[2] | WM97XX_PRP_DET_DIG);
+		wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
+	} else
+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
+				 wm->dig[2] & ~WM97XX_PRP_DET_DIG);
+}
+
+static void wm9705_aux_prepare(struct wm97xx *wm)
+{
+	memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG);
+}
+
+static void wm9705_dig_restore(struct wm97xx *wm)
+{
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]);
+}
+
+static inline int is_pden(struct wm97xx *wm)
+{
+	return wm->dig[2] & WM9705_PDEN;
+}
+
+/*
+ * Read a sample from the WM9705 adc in polling mode.
+ */
+static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
+{
+	int timeout = 5 * delay;
+
+	if (!wm->pen_probably_down) {
+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(data & WM97XX_PEN_DOWN))
+			return RC_PENUP;
+		wm->pen_probably_down = 1;
+	}
+
+	/* set up digitiser */
+	if (adcsel & 0x8000)
+		adcsel = ((adcsel & 0x7fff) + 3) << 12;
+
+	if (wm->mach_ops && wm->mach_ops->pre_sample)
+		wm->mach_ops->pre_sample(adcsel);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
+			 adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
+
+	/* wait 3 AC97 time slots + delay for conversion */
+	poll_delay(delay);
+
+	/* wait for POLL to go low */
+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
+	       && timeout) {
+		udelay(AC97_LINK_FRAME);
+		timeout--;
+	}
+
+	if (timeout == 0) {
+		/* If PDEN is set, we can get a timeout when pen goes up */
+		if (is_pden(wm))
+			wm->pen_probably_down = 0;
+		else
+			dev_dbg(wm->dev, "adc sample timeout");
+		return RC_PENUP;
+	}
+
+	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	if (wm->mach_ops && wm->mach_ops->post_sample)
+		wm->mach_ops->post_sample(adcsel);
+
+	/* check we have correct sample */
+	if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
+		dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
+		*sample & WM97XX_ADCSEL_MASK);
+		return RC_PENUP;
+	}
+
+	if (!(*sample & WM97XX_PEN_DOWN)) {
+		wm->pen_probably_down = 0;
+		return RC_PENUP;
+	}
+
+	return RC_VALID;
+}
+
+/*
+ * Sample the WM9705 touchscreen in polling mode
+ */
+static int wm9705_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
+{
+	int rc;
+
+	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X, &data->x);
+	if (rc != RC_VALID)
+		return rc;
+	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y);
+	if (rc != RC_VALID)
+		return rc;
+	if (pil) {
+		rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p);
+		if (rc != RC_VALID)
+			return rc;
+	} else
+		data->p = DEFAULT_PRESSURE;
+
+	return RC_VALID;
+}
+
+/*
+ * Enable WM9705 continuous mode, i.e. touch data is streamed across
+ * an AC97 slot
+ */
+static int wm9705_acc_enable(struct wm97xx *wm, int enable)
+{
+	u16 dig1, dig2;
+	int ret = 0;
+
+	dig1 = wm->dig[1];
+	dig2 = wm->dig[2];
+
+	if (enable) {
+		/* continous mode */
+		if (wm->mach_ops->acc_startup &&
+		    (ret = wm->mach_ops->acc_startup(wm)) < 0)
+			return ret;
+		dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK |
+			  WM97XX_DELAY_MASK | WM97XX_SLT_MASK);
+		dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN |
+			WM97XX_DELAY(delay) |
+			WM97XX_SLT(wm->acc_slot) |
+			WM97XX_RATE(wm->acc_rate);
+		if (pil)
+			dig1 |= WM97XX_ADCSEL_PRES;
+		dig2 |= WM9705_PDEN;
+	} else {
+		dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN);
+		dig2 &= ~WM9705_PDEN;
+		if (wm->mach_ops->acc_shutdown)
+			wm->mach_ops->acc_shutdown(wm);
+	}
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
+
+	return ret;
+}
+
+struct wm97xx_codec_drv wm9705_codec = {
+	.id = WM9705_ID2,
+	.name = "wm9705",
+	.poll_sample = wm9705_poll_sample,
+	.poll_touch = wm9705_poll_touch,
+	.acc_enable = wm9705_acc_enable,
+	.phy_init = wm9705_phy_init,
+	.dig_enable = wm9705_dig_enable,
+	.dig_restore = wm9705_dig_restore,
+	.aux_prepare = wm9705_aux_prepare,
+};
+EXPORT_SYMBOL_GPL(wm9705_codec);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM9705 Touch Screen Driver");
+MODULE_LICENSE("GPL");

drivers/macintosh/mac_hid.c

@@ -103,6 +103,9 @@ int mac_hid_mouse_emulate_buttons(int caller, unsigned int keycode, int down)
 	return 0;
 }
 
+static struct lock_class_key emumousebtn_event_class;
+static struct lock_class_key emumousebtn_mutex_class;
+
 static int emumousebtn_input_register(void)
 {
 	int ret;
@@ -111,6 +114,9 @@ static int emumousebtn_input_register(void)
 	if (!emumousebtn)
 		return -ENOMEM;
 
+	lockdep_set_class(emumousebtn->event_lock, &emumousebtn_event_class);
+	lockdep_set_class(emumousebtn->mutex, &emumousebtn_mutex_class);
+
 	emumousebtn->name = "Macintosh mouse button emulation";
 	emumousebtn->id.bustype = BUS_ADB;
 	emumousebtn->id.vendor = 0x0001;

include/linux/input.h

@@ -1025,10 +1025,6 @@ struct ff_effect {
  * @node: used to place the device onto input_dev_list
  */
 struct input_dev {
-	/* private: */
-	void *private;	/* do not use */
-	/* public: */
-
 	const char *name;
 	const char *phys;
 	const char *uniq;
@@ -1238,12 +1234,12 @@ static inline void input_put_device(struct input_dev *dev)
 
 static inline void *input_get_drvdata(struct input_dev *dev)
 {
-	return dev->private;
+	return dev_get_drvdata(&dev->dev);
 }
 
 static inline void input_set_drvdata(struct input_dev *dev, void *data)
 {
-	dev->private = data;
+	dev_set_drvdata(&dev->dev, data);
 }
 
 int __must_check input_register_device(struct input_dev *);

include/linux/keyboard.h

@@ -33,6 +33,7 @@ struct keyboard_notifier_param {
 	struct vc_data *vc;	/* VC on which the keyboard press was done */
 	int down;		/* Pressure of the key? */
 	int shift;		/* Current shift mask */
+	int ledstate;		/* Current led state */
 	unsigned int value;	/* keycode, unicode value or keysym */
 };
 

include/linux/serio.h

@@ -211,5 +211,6 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_TOUCHWIN	0x33
 #define SERIO_TAOSEVM	0x34
 #define SERIO_FUJITSU	0x35
+#define SERIO_ZHENHUA	0x36
 
 #endif

include/linux/spi/ads7846.h

@@ -14,7 +14,8 @@ enum ads7846_filter {
 struct ads7846_platform_data {
 	u16	model;			/* 7843, 7845, 7846. */
 	u16	vref_delay_usecs;	/* 0 for external vref; etc */
-	int	keep_vref_on:1;		/* set to keep vref on for differential
+	u16	vref_mv;		/* external vref value, milliVolts */
+	bool	keep_vref_on;		/* set to keep vref on for differential
 					 * measurements as well */
 
 	/* Settling time of the analog signals; a function of Vcc and the