Commit 2d9498f3 authored by David Graham's avatar David Graham Committed by Jeff Garzik

e1000e: Fix HW Error on es2lan, ARP capture issue by BMC

Several components to this complex fix. The es2lan cards occasionally
gave a "HW Error" especially when forcing speed. Some users also
reported that the BMC stole ARP packets.

The fixes include setting the proper SW_FW bits to tell the BMC
that we're active and not do any un-initialization at all, so the
setup routine is largely changed.
Signed-off-by: default avatarDavid Graham <david.graham@intel.com>
Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent de5b3077
...@@ -184,6 +184,7 @@ ...@@ -184,6 +184,7 @@
#define E1000_SWFW_EEP_SM 0x1 #define E1000_SWFW_EEP_SM 0x1
#define E1000_SWFW_PHY0_SM 0x2 #define E1000_SWFW_PHY0_SM 0x2
#define E1000_SWFW_PHY1_SM 0x4 #define E1000_SWFW_PHY1_SM 0x4
#define E1000_SWFW_CSR_SM 0x8
/* Device Control */ /* Device Control */
#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
......
...@@ -449,6 +449,8 @@ extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); ...@@ -449,6 +449,8 @@ extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success); u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw); extern s32 e1000e_check_downshift(struct e1000_hw *hw);
static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
......
...@@ -41,6 +41,7 @@ ...@@ -41,6 +41,7 @@
#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02 #define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10 #define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008 #define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800 #define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
...@@ -48,6 +49,7 @@ ...@@ -48,6 +49,7 @@
#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004 #define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 #define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ #define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 #define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
...@@ -85,6 +87,9 @@ ...@@ -85,6 +87,9 @@
/* Kumeran Mode Control Register (Page 193, Register 16) */ /* Kumeran Mode Control Register (Page 193, Register 16) */
#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 #define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
/* Max number of times Kumeran read/write should be validated */
#define GG82563_MAX_KMRN_RETRY 0x5
/* Power Management Control Register (Page 193, Register 20) */ /* Power Management Control Register (Page 193, Register 20) */
#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 #define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
/* 1=Enable SERDES Electrical Idle */ /* 1=Enable SERDES Electrical Idle */
...@@ -270,6 +275,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw) ...@@ -270,6 +275,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
u16 mask; u16 mask;
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM; mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
mask |= E1000_SWFW_CSR_SM;
return e1000_acquire_swfw_sync_80003es2lan(hw, mask); return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
} }
...@@ -286,6 +292,8 @@ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw) ...@@ -286,6 +292,8 @@ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
u16 mask; u16 mask;
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM; mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
mask |= E1000_SWFW_CSR_SM;
e1000_release_swfw_sync_80003es2lan(hw, mask); e1000_release_swfw_sync_80003es2lan(hw, mask);
} }
...@@ -410,20 +418,27 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, ...@@ -410,20 +418,27 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
u32 page_select; u32 page_select;
u16 temp; u16 temp;
ret_val = e1000_acquire_phy_80003es2lan(hw);
if (ret_val)
return ret_val;
/* Select Configuration Page */ /* Select Configuration Page */
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
page_select = GG82563_PHY_PAGE_SELECT; page_select = GG82563_PHY_PAGE_SELECT;
else } else {
/* /*
* Use Alternative Page Select register to access * Use Alternative Page Select register to access
* registers 30 and 31 * registers 30 and 31
*/ */
page_select = GG82563_PHY_PAGE_SELECT_ALT; page_select = GG82563_PHY_PAGE_SELECT_ALT;
}
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT); temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp); ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
if (ret_val) if (ret_val) {
e1000_release_phy_80003es2lan(hw);
return ret_val; return ret_val;
}
/* /*
* The "ready" bit in the MDIC register may be incorrectly set * The "ready" bit in the MDIC register may be incorrectly set
...@@ -433,20 +448,21 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, ...@@ -433,20 +448,21 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200); udelay(200);
/* ...and verify the command was successful. */ /* ...and verify the command was successful. */
ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp); ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) { if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
ret_val = -E1000_ERR_PHY; ret_val = -E1000_ERR_PHY;
e1000_release_phy_80003es2lan(hw);
return ret_val; return ret_val;
} }
udelay(200); udelay(200);
ret_val = e1000e_read_phy_reg_m88(hw, ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
MAX_PHY_REG_ADDRESS & offset, data);
data);
udelay(200); udelay(200);
e1000_release_phy_80003es2lan(hw);
return ret_val; return ret_val;
} }
...@@ -467,20 +483,27 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, ...@@ -467,20 +483,27 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
u32 page_select; u32 page_select;
u16 temp; u16 temp;
ret_val = e1000_acquire_phy_80003es2lan(hw);
if (ret_val)
return ret_val;
/* Select Configuration Page */ /* Select Configuration Page */
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
page_select = GG82563_PHY_PAGE_SELECT; page_select = GG82563_PHY_PAGE_SELECT;
else } else {
/* /*
* Use Alternative Page Select register to access * Use Alternative Page Select register to access
* registers 30 and 31 * registers 30 and 31
*/ */
page_select = GG82563_PHY_PAGE_SELECT_ALT; page_select = GG82563_PHY_PAGE_SELECT_ALT;
}
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT); temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp); ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
if (ret_val) if (ret_val) {
e1000_release_phy_80003es2lan(hw);
return ret_val; return ret_val;
}
/* /*
...@@ -491,18 +514,20 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, ...@@ -491,18 +514,20 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200); udelay(200);
/* ...and verify the command was successful. */ /* ...and verify the command was successful. */
ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp); ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
e1000_release_phy_80003es2lan(hw);
return -E1000_ERR_PHY; return -E1000_ERR_PHY;
}
udelay(200); udelay(200);
ret_val = e1000e_write_phy_reg_m88(hw, ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
MAX_PHY_REG_ADDRESS & offset, data);
data);
udelay(200); udelay(200);
e1000_release_phy_80003es2lan(hw);
return ret_val; return ret_val;
} }
...@@ -882,10 +907,10 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) ...@@ -882,10 +907,10 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy; struct e1000_phy_info *phy = &hw->phy;
s32 ret_val; s32 ret_val;
u32 ctrl_ext; u32 ctrl_ext;
u16 data; u32 i = 0;
u16 data, data2;
ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
&data);
if (ret_val) if (ret_val)
return ret_val; return ret_val;
...@@ -893,8 +918,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) ...@@ -893,8 +918,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
/* Use 25MHz for both link down and 1000Base-T for Tx clock. */ /* Use 25MHz for both link down and 1000Base-T for Tx clock. */
data |= GG82563_MSCR_TX_CLK_1000MBPS_25; data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
data);
if (ret_val) if (ret_val)
return ret_val; return ret_val;
...@@ -954,6 +978,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) ...@@ -954,6 +978,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val) if (ret_val)
return ret_val; return ret_val;
ret_val = e1000e_read_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
&data);
if (ret_val)
return ret_val;
data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
data);
if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data); ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
if (ret_val) if (ret_val)
return ret_val; return ret_val;
...@@ -983,9 +1019,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) ...@@ -983,9 +1019,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val) if (ret_val)
return ret_val; return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data); do {
if (ret_val) ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
return ret_val; &data);
if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
&data2);
if (ret_val)
return ret_val;
i++;
} while ((data != data2) && (i < GG82563_MAX_KMRN_RETRY));
data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data); ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
...@@ -1074,7 +1119,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex) ...@@ -1074,7 +1119,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
{ {
s32 ret_val; s32 ret_val;
u32 tipg; u32 tipg;
u16 reg_data; u32 i = 0;
u16 reg_data, reg_data2;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT; reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
...@@ -1088,9 +1134,16 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex) ...@@ -1088,9 +1134,16 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN; tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
ew32(TIPG, tipg); ew32(TIPG, tipg);
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data); do {
if (ret_val) ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
return ret_val; if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data2);
if (ret_val)
return ret_val;
i++;
} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
if (duplex == HALF_DUPLEX) if (duplex == HALF_DUPLEX)
reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER; reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
...@@ -1112,8 +1165,9 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex) ...@@ -1112,8 +1165,9 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw) static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
{ {
s32 ret_val; s32 ret_val;
u16 reg_data; u16 reg_data, reg_data2;
u32 tipg; u32 tipg;
u32 i = 0;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT; reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
...@@ -1127,9 +1181,16 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw) ...@@ -1127,9 +1181,16 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN; tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
ew32(TIPG, tipg); ew32(TIPG, tipg);
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data); do {
if (ret_val) ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
return ret_val; if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data2);
if (ret_val)
return ret_val;
i++;
} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER; reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data); ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
......
...@@ -116,7 +116,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) ...@@ -116,7 +116,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
} }
/** /**
* e1000_read_phy_reg_mdic - Read MDI control register * e1000e_read_phy_reg_mdic - Read MDI control register
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* @offset: register offset to be read * @offset: register offset to be read
* @data: pointer to the read data * @data: pointer to the read data
...@@ -124,7 +124,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) ...@@ -124,7 +124,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
* Reads the MDI control register in the PHY at offset and stores the * Reads the MDI control register in the PHY at offset and stores the
* information read to data. * information read to data.
**/ **/
static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
{ {
struct e1000_phy_info *phy = &hw->phy; struct e1000_phy_info *phy = &hw->phy;
u32 i, mdic = 0; u32 i, mdic = 0;
...@@ -150,7 +150,7 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) ...@@ -150,7 +150,7 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
* Increasing the time out as testing showed failures with * Increasing the time out as testing showed failures with
* the lower time out * the lower time out
*/ */
for (i = 0; i < 64; i++) { for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
udelay(50); udelay(50);
mdic = er32(MDIC); mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY) if (mdic & E1000_MDIC_READY)
...@@ -170,14 +170,14 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) ...@@ -170,14 +170,14 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
} }
/** /**
* e1000_write_phy_reg_mdic - Write MDI control register * e1000e_write_phy_reg_mdic - Write MDI control register
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* @offset: register offset to write to * @offset: register offset to write to
* @data: data to write to register at offset * @data: data to write to register at offset
* *
* Writes data to MDI control register in the PHY at offset. * Writes data to MDI control register in the PHY at offset.
**/ **/
static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
{ {
struct e1000_phy_info *phy = &hw->phy; struct e1000_phy_info *phy = &hw->phy;
u32 i, mdic = 0; u32 i, mdic = 0;
...@@ -199,9 +199,13 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) ...@@ -199,9 +199,13 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
ew32(MDIC, mdic); ew32(MDIC, mdic);
/* Poll the ready bit to see if the MDI read completed */ /*
for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) { * Poll the ready bit to see if the MDI read completed
udelay(5); * Increasing the time out as testing showed failures with
* the lower time out
*/
for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
udelay(50);
mdic = er32(MDIC); mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY) if (mdic & E1000_MDIC_READY)
break; break;
...@@ -210,6 +214,10 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) ...@@ -210,6 +214,10 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
hw_dbg(hw, "MDI Write did not complete\n"); hw_dbg(hw, "MDI Write did not complete\n");
return -E1000_ERR_PHY; return -E1000_ERR_PHY;
} }
if (mdic & E1000_MDIC_ERROR) {
hw_dbg(hw, "MDI Error\n");
return -E1000_ERR_PHY;
}
return 0; return 0;
} }
...@@ -232,9 +240,8 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) ...@@ -232,9 +240,8 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
if (ret_val) if (ret_val)
return ret_val; return ret_val;
ret_val = e1000_read_phy_reg_mdic(hw, ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
MAX_PHY_REG_ADDRESS & offset, data);
data);
hw->phy.ops.release_phy(hw); hw->phy.ops.release_phy(hw);
...@@ -258,9 +265,8 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) ...@@ -258,9 +265,8 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
if (ret_val) if (ret_val)
return ret_val; return ret_val;
ret_val = e1000_write_phy_reg_mdic(hw, ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
MAX_PHY_REG_ADDRESS & offset, data);
data);
hw->phy.ops.release_phy(hw); hw->phy.ops.release_phy(hw);
...@@ -286,18 +292,17 @@ s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) ...@@ -286,18 +292,17 @@ s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
return ret_val; return ret_val;
if (offset > MAX_PHY_MULTI_PAGE_REG) { if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000_write_phy_reg_mdic(hw, ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT, IGP01E1000_PHY_PAGE_SELECT,
(u16)offset); (u16)offset);
if (ret_val) { if (ret_val) {
hw->phy.ops.release_phy(hw); hw->phy.ops.release_phy(hw);
return ret_val; return ret_val;
} }
} }
ret_val = e1000_read_phy_reg_mdic(hw, ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
MAX_PHY_REG_ADDRESS & offset, data);
data);
hw->phy.ops.release_phy(hw); hw->phy.ops.release_phy(hw);
...@@ -322,18 +327,17 @@ s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) ...@@ -322,18 +327,17 @@ s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
return ret_val; return ret_val;
if (offset > MAX_PHY_MULTI_PAGE_REG) { if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000_write_phy_reg_mdic(hw, ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT, IGP01E1000_PHY_PAGE_SELECT,
(u16)offset); (u16)offset);
if (ret_val) { if (ret_val) {
hw->phy.ops.release_phy(hw); hw->phy.ops.release_phy(hw);
return ret_val; return ret_val;
} }
} }
ret_val = e1000_write_phy_reg_mdic(hw, ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
MAX_PHY_REG_ADDRESS & offset, data);
data);
hw->phy.ops.release_phy(hw); hw->phy.ops.release_phy(hw);
...@@ -420,7 +424,9 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) ...@@ -420,7 +424,9 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (ret_val) if (ret_val)
return ret_val; return ret_val;
phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; /* For newer PHYs this bit is downshift enable */
if (phy->type == e1000_phy_m88)
phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
/* /*
* Options: * Options:
...@@ -463,7 +469,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) ...@@ -463,7 +469,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (ret_val) if (ret_val)
return ret_val; return ret_val;
if (phy->revision < 4) { if ((phy->type == e1000_phy_m88) && (phy->revision < 4)) {
/* /*
* Force TX_CLK in the Extended PHY Specific Control Register * Force TX_CLK in the Extended PHY Specific Control Register
* to 25MHz clock. * to 25MHz clock.
...@@ -518,8 +524,11 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) ...@@ -518,8 +524,11 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
return ret_val; return ret_val;
} }
/* Wait 15ms for MAC to configure PHY from NVM settings. */ /*
msleep(15); * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
* timeout issues when LFS is enabled.
*/
msleep(100);
/* disable lplu d0 during driver init */ /* disable lplu d0 during driver init */
ret_val = e1000_set_d0_lplu_state(hw, 0); ret_val = e1000_set_d0_lplu_state(hw, 0);
...@@ -1152,9 +1161,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active) ...@@ -1152,9 +1161,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
if (!active) { if (!active) {
data &= ~IGP02E1000_PM_D3_LPLU; data &= ~IGP02E1000_PM_D3_LPLU;
ret_val = e1e_wphy(hw, ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
IGP02E1000_PHY_POWER_MGMT,
data);
if (ret_val) if (ret_val)
return ret_val; return ret_val;
/* /*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment