Commit 2bec0893 authored by Adrian Hunter's avatar Adrian Hunter Committed by Linus Torvalds

omap_hsmmc: ensure all clock enables and disables are paired

[madhu.cr@ti.com: fix for the db clock failure message]
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@nokia.com>
Acked-by: default avatarMatt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: default avatarMadhusudhan Chikkature <madhu.cr@ti.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent b62f6228
......@@ -162,7 +162,7 @@ struct omap_hsmmc_host {
int use_dma, dma_ch;
int dma_line_tx, dma_line_rx;
int slot_id;
int dbclk_enabled;
int got_dbclk;
int response_busy;
int context_loss;
int dpm_state;
......@@ -742,22 +742,24 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
/* Disable the clocks */
clk_disable(host->fclk);
clk_disable(host->iclk);
clk_disable(host->dbclk);
if (host->got_dbclk)
clk_disable(host->dbclk);
/* Turn the power off */
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
if (ret != 0)
goto err;
/* Turn the power ON with given VDD 1.8 or 3.0v */
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
if (!ret)
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1,
vdd);
clk_enable(host->iclk);
clk_enable(host->fclk);
if (host->got_dbclk)
clk_enable(host->dbclk);
if (ret != 0)
goto err;
clk_enable(host->fclk);
clk_enable(host->iclk);
clk_enable(host->dbclk);
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
reg_val = OMAP_HSMMC_READ(host->base, HCTL);
......@@ -1695,18 +1697,22 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
goto err1;
}
host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
/*
* MMC can still work without debounce clock.
*/
if (IS_ERR(host->dbclk))
dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
else
if (clk_enable(host->dbclk) != 0)
dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
" clk failed\n");
if (cpu_is_omap2430()) {
host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
/*
* MMC can still work without debounce clock.
*/
if (IS_ERR(host->dbclk))
dev_warn(mmc_dev(host->mmc),
"Failed to get debounce clock\n");
else
host->dbclk_enabled = 1;
host->got_dbclk = 1;
if (host->got_dbclk)
if (clk_enable(host->dbclk) != 0)
dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
" clk failed\n");
}
/* Since we do only SG emulation, we can have as many segs
* as we want. */
......@@ -1820,7 +1826,7 @@ err_irq:
clk_disable(host->iclk);
clk_put(host->fclk);
clk_put(host->iclk);
if (host->dbclk_enabled) {
if (host->got_dbclk) {
clk_disable(host->dbclk);
clk_put(host->dbclk);
}
......@@ -1854,7 +1860,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
clk_disable(host->iclk);
clk_put(host->fclk);
clk_put(host->iclk);
if (host->dbclk_enabled) {
if (host->got_dbclk) {
clk_disable(host->dbclk);
clk_put(host->dbclk);
}
......@@ -1905,7 +1911,8 @@ static int omap_hsmmc_suspend(struct platform_device *pdev, pm_message_t state)
OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
mmc_host_disable(host->mmc);
clk_disable(host->iclk);
clk_disable(host->dbclk);
if (host->got_dbclk)
clk_disable(host->dbclk);
} else {
host->suspended = 0;
if (host->pdata->resume) {
......@@ -1936,15 +1943,14 @@ static int omap_hsmmc_resume(struct platform_device *pdev)
if (ret)
goto clk_en_err;
if (clk_enable(host->dbclk) != 0)
dev_dbg(mmc_dev(host->mmc),
"Enabling debounce clk failed\n");
if (mmc_host_enable(host->mmc) != 0) {
clk_disable(host->iclk);
goto clk_en_err;
}
if (host->got_dbclk)
clk_enable(host->dbclk);
omap_hsmmc_conf_bus_power(host);
if (host->pdata->resume) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment