Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data
  [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created
  [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch
  [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail
  davinci: DM644x: NAND: update partitioning
  davinci: update DM644x support in preparation for more SoCs
  davinci: DM644x: rename board file
  davinci: update pin-multiplexing support
  davinci: serial: generalize for more SoCs
  davinci: DM355 IRQ Definitions
  davinci: DM646x: add interrupt number and priorities
  davinci: PSC: Clear bits in MDCTL reg before setting new bits
  davinci: gpio bugfixes
  davinci: add EDMA driver
  davinci: timers: use clk_get_rate()
  [ARM] pxa/littleton: add missing da9034 touchscreen support
  [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders
  [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working
  [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC
  [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol
  ...

arch/arm/Kconfig

@@ -486,8 +486,6 @@ config ARCH_PXA
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -585,6 +583,8 @@ config ARCH_DAVINCI
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select ZONE_DMA
+	select HAVE_IDE
+	select COMMON_CLKDEV
 	help
 	  Support for TI's DaVinci platform.
 
@@ -740,6 +740,56 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_411920
+	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+	depends on CPU_V6 && !SMP
+	help
+	  Invalidation of the Instruction Cache operation can
+	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+	  It does not affect the MPCore. This option enables the ARM Ltd.
+	  recommended workaround.
+
+config ARM_ERRATA_430973
+	bool "ARM errata: Stale prediction on replaced interworking branch"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 430973 Cortex-A8
+	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+	  interworking branch is replaced with another code sequence at the
+	  same virtual address, whether due to self-modifying code or virtual
+	  to physical address re-mapping, Cortex-A8 does not recover from the
+	  stale interworking branch prediction. This results in Cortex-A8
+	  executing the new code sequence in the incorrect ARM or Thumb state.
+	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+	  and also flushes the branch target cache at every context switch.
+	  Note that setting specific bits in the ACTLR register may not be
+	  available in non-secure mode.
+
+config ARM_ERRATA_458693
+	bool "ARM errata: Processor deadlock when a false hazard is created"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+	  erratum. For very specific sequences of memory operations, it is
+	  possible for a hazard condition intended for a cache line to instead
+	  be incorrectly associated with a different cache line. This false
+	  hazard might then cause a processor deadlock. The workaround enables
+	  the L1 caching of the NEON accesses and disables the PLD instruction
+	  in the ACTLR register. Note that setting specific bits in the ACTLR
+	  register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+	  erratum. Any asynchronous access to the L2 cache may encounter a
+	  situation in which recent store transactions to the L2 cache are lost
+	  and overwritten with stale memory contents from external memory. The
+	  workaround disables the write-allocate mode for the L2 cache via the
+	  ACTLR register. Note that setting specific bits in the ACTLR register
+	  may not be available in non-secure mode.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1171,12 +1221,6 @@ config CPU_FREQ_IMX
 
 	  If in doubt, say N.
 
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
 endif
 
 source "drivers/cpuidle/Kconfig"

arch/arm/configs/viper_defconfig

@@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
 
 #
 # Floating point emulation

arch/arm/mach-davinci/Kconfig

@@ -4,19 +4,56 @@ menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI644x
-	default y
+config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
-	bool "TI DaVinci EVM"
+	bool "TI DM644x EVM"
 	default y
-	depends on ARCH_DAVINCI644x
+	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
-	  for development is a DaVinci EVM
+	  for development is a DM644x EVM
+
+
+config DAVINCI_MUX
+	bool "DAVINCI multiplexing support"
+	depends on ARCH_DAVINCI
+	default y
+	help
+	  Pin multiplexing support for DAVINCI boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
+
+config DAVINCI_MUX_DEBUG
+        bool "Multiplexing debug output"
+        depends on DAVINCI_MUX
+        help
+          Makes the multiplexing functions print out a lot of debug info.
+          This is useful if you want to find out the correct values of the
+          multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+        bool "Warn about pins the bootloader didn't set up"
+        depends on DAVINCI_MUX
+        help
+          Choose Y here to warn whenever driver initialization logic needs
+          to change the pin multiplexing setup.  When there are no warnings
+          printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_DAVINCI
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
 
 endmenu
 

arch/arm/mach-davinci/Makefile

@@ -5,7 +5,12 @@
 
 # Common objects
 obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o mux.o devices.o usb.o
+			   gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
+
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
 
 # Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o

arch/arm/mach-davinci/clock.h

 /*
  * TI DaVinci clock definitions
  *
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,23 +12,85 @@
 #ifndef __ARCH_ARM_DAVINCI_CLOCK_H
 #define __ARCH_ARM_DAVINCI_CLOCK_H
 
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL          0x100
+#define PLLCTL_PLLEN    BIT(0)
+#define PLLCTL_CLKMODE  BIT(8)
+
+#define PLLM		0x110
+#define PLLM_PLLM_MASK  0xff
+
+#define PREDIV          0x114
+#define PLLDIV1         0x118
+#define PLLDIV2         0x11c
+#define PLLDIV3         0x120
+#define POSTDIV         0x128
+#define BPDIV           0x12c
+#define PLLCMD		0x138
+#define PLLSTAT		0x13c
+#define PLLALNCTL	0x140
+#define PLLDCHANGE	0x144
+#define PLLCKEN		0x148
+#define PLLCKSTAT	0x14c
+#define PLLSYSTAT	0x150
+#define PLLDIV4         0x160
+#define PLLDIV5         0x164
+#define PLLDIV6         0x168
+#define PLLDIV7         0x16c
+#define PLLDIV8         0x170
+#define PLLDIV9         0x174
+#define PLLDIV_EN       BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+struct pll_data {
+	u32 phys_base;
+	void __iomem *base;
+	u32 num;
+	u32 flags;
+	u32 input_rate;
+};
+#define PLL_HAS_PREDIV          0x01
+#define PLL_HAS_POSTDIV         0x02
+
 struct clk {
 	struct list_head	node;
 	struct module		*owner;
 	const char		*name;
-	unsigned int		*rate;
-	int			id;
-	__s8			usecount;
-	__u8			flags;
-	__u8			lpsc;
+	unsigned long		rate;
+	u8			usecount;
+	u8			flags;
+	u8			lpsc;
+	struct clk              *parent;
+	struct pll_data         *pll_data;
+	u32                     div_reg;
 };
 
 /* Clock flags */
-#define RATE_CKCTL		1
-#define RATE_FIXED		2
-#define RATE_PROPAGATES		4
-#define VIRTUAL_CLOCK		8
-#define ALWAYS_ENABLED		16
-#define ENABLE_REG_32BIT	32
+#define ALWAYS_ENABLED		BIT(1)
+#define CLK_PSC                 BIT(2)
+#define PSC_DSP                 BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PLL			BIT(4) /* PLL-derived clock */
+#define PRE_PLL                 BIT(5) /* source is before PLL mult/div */
+
+struct davinci_clk {
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck) 		\
+	{				\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
 
+int davinci_clk_init(struct davinci_clk *clocks);
 #endif

arch/arm/mach-davinci/devices.c

@@ -21,6 +21,10 @@
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
+
+#define DAVINCI_I2C_BASE	     0x01C21000
 
 static struct resource i2c_resources[] = {
 	{
@@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = {
 
 void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 {
+	if (cpu_is_davinci_dm644x())
+		davinci_cfg_reg(DM644X_I2C);
+
 	davinci_i2c_device.dev.platform_data = pdata;
 	(void) platform_device_register(&davinci_i2c_device);
 }

arch/arm/mach-davinci/gpio.c

@@ -20,6 +20,7 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 
+#include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -36,9 +37,10 @@ struct davinci_gpio {
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
+static unsigned __initdata ngpio;
 
 /* create a non-inlined version */
-static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
+static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
 {
 	return __gpio_to_controller(gpio);
 }
@@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void)
 {
 	int i, base;
 
-	for (i = 0, base = 0;
-			i < ARRAY_SIZE(chips);
-			i++, base += 32) {
+	/* The gpio banks conceptually expose a segmented bitmap,
+	 * and "ngpio" is one more than the largest zero-based
+	 * bit index that's valid.
+	 */
+	if (cpu_is_davinci_dm355()) {		/* or dm335() */
+		ngpio = 104;
+	} else if (cpu_is_davinci_dm644x()) {	/* or dm337() */
+		ngpio = 71;
+	} else if (cpu_is_davinci_dm646x()) {
+		/* NOTE:  each bank has several "reserved" bits,
+		 * unusable as GPIOs.  Only 33 of the GPIO numbers
+		 * are usable, and we're not rejecting the others.
+		 */
+		ngpio = 43;
+	} else {
+		/* if cpu_is_davinci_dm643x() ngpio = 111 */
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+		ngpio = DAVINCI_N_GPIO;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
 		chips[i].chip.label = "DaVinci";
 
 		chips[i].chip.direction_input = davinci_direction_in;
@@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void)
 		chips[i].chip.set = davinci_gpio_set;
 
 		chips[i].chip.base = base;
-		chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+		chips[i].chip.ngpio = ngpio - base;
 		if (chips[i].chip.ngpio > 32)
 			chips[i].chip.ngpio = 32;
 
@@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup);
  * We expect irqs will normally be set up as input pins, but they can also be
  * used as output pins ... which is convenient for testing.
  *
- * NOTE:  GPIO0..GPIO7 also have direct INTC hookups, which work in addition
- * to their GPIOBNK0 irq (but with a bit less overhead).  But we don't have
- * a good way to hook those up ...
+ * NOTE:  The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
+ * on triggering (e.g. no edge options).  We don't try to use those.
  *
- * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * All those INTC hookups (direct, plus several IRQ banks) can also
  * serve as EDMA event triggers.
  */
 
@@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 }
 
 /*
- * NOTE:  for suspend/resume, probably best to make a sysdev (and class)
- * with its suspend/resume calls hooking into the results of the set_wake()
+ * NOTE:  for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
  * calls ... so if no gpios are wakeup events the clock can be disabled,
  * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * can be set appropriately for GPIOV33 pins.
+ * (dm6446) can be set appropriately for GPIOV33 pins.
  */
 
 static int __init davinci_gpio_irq_setup(void)
 {
 	unsigned	gpio, irq, bank;
+	unsigned	bank_irq;
 	struct clk	*clk;
+	u32		binten = 0;
+
+	if (cpu_is_davinci_dm355()) {		/* or dm335() */
+		bank_irq = IRQ_DM355_GPIOBNK0;
+	} else if (cpu_is_davinci_dm644x()) {
+		bank_irq = IRQ_GPIOBNK0;
+	} else if (cpu_is_davinci_dm646x()) {
+		bank_irq = IRQ_DM646X_GPIOBNK0;
+	} else {
+		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+		return -EINVAL;
+	}
 
 	clk = clk_get(NULL, "gpio");
 	if (IS_ERR(clk)) {
 		printk(KERN_ERR "Error %ld getting gpio clock?\n",
 		       PTR_ERR(clk));
-		return 0;
+		return PTR_ERR(clk);
 	}
-
 	clk_enable(clk);
 
-	for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
-	     gpio < DAVINCI_N_GPIO; bank++) {
+	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+			gpio < ngpio;
+			bank++, bank_irq++) {
 		struct gpio_controller	*__iomem g = gpio2controller(gpio);
 		unsigned		i;
 
@@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void)
 		__raw_writel(~0, &g->clr_rising);
 
 		/* set up all irqs in this bank */
-		set_irq_chained_handler(bank, gpio_irq_handler);
-		set_irq_chip_data(bank, g);
-		set_irq_data(bank, (void *)irq);
+		set_irq_chained_handler(bank_irq, gpio_irq_handler);
+		set_irq_chip_data(bank_irq, g);
+		set_irq_data(bank_irq, (void *)irq);
 
-		for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
-		     i++, irq++, gpio++) {
+		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
 			set_irq_chip_data(irq, g);
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
 		}
+
+		binten |= BIT(bank);
 	}
 
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(0x1f, (void *__iomem)
+	__raw_writel(binten, (void *__iomem)
 		     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
-
 arch_initcall(davinci_gpio_irq_setup);

arch/arm/mach-davinci/id.c

@@ -15,7 +15,9 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
-#define JTAG_ID_BASE		0x01c40028
+#define JTAG_ID_BASE		IO_ADDRESS(0x01c40028)
+
+static unsigned int davinci_revision;
 
 struct davinci_id {
 	u8	variant;	/* JTAG ID bits 31:28 */
@@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = {
 		.manufacturer = 0x017,
 		.type	      = 0x64460000,
 	},
+	{
+		/* DM646X */
+		.part_no      = 0xb770,
+		.variant      = 0x0,
+		.manufacturer = 0x017,
+		.type         = 0x64670000,
+	},
+	{
+		/* DM355 */
+		.part_no	= 0xb73b,
+		.variant	= 0x0,
+		.manufacturer	= 0x00f,
+		.type		= 0x03550000,
+	},
 };
 
 /*
@@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void)
 {
 	u32 dev_id, part_no;
 
-	dev_id = davinci_readl(JTAG_ID_BASE);
+	dev_id = __raw_readl(JTAG_ID_BASE);
 
 	part_no = ((dev_id >> 12) & 0xffff);
 
@@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void)
 {
 	u32 variant;
 
-	variant = davinci_readl(JTAG_ID_BASE);
+	variant = __raw_readl(JTAG_ID_BASE);
 
 	variant = (variant >> 28) & 0xf;
 
 	return variant;
 }
 
+unsigned int davinci_rev(void)
+{
+	return davinci_revision >> 16;
+}
+EXPORT_SYMBOL(davinci_rev);
+
 void __init davinci_check_revision(void)
 {
 	int i;
@@ -75,7 +97,7 @@ void __init davinci_check_revision(void)
 	/* First check only the major version in a safe way */
 	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
 		if (part_no == (davinci_ids[i].part_no)) {
-			system_rev = davinci_ids[i].type;
+			davinci_revision = davinci_ids[i].type;
 			break;
 		}
 	}
@@ -84,10 +106,11 @@ void __init davinci_check_revision(void)
 	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
 		if (part_no == davinci_ids[i].part_no &&
 		    variant == davinci_ids[i].variant) {
-			system_rev = davinci_ids[i].type;
+			davinci_revision = davinci_ids[i].type;
 			break;
 		}
 	}
 
-	printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+	printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
+	       davinci_rev(), variant);
 }

arch/arm/mach-davinci/include/mach/board-dm6446evm.h

+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif

arch/arm/mach-davinci/include/mach/clkdev.h

+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif

arch/arm/mach-davinci/include/mach/clock.h

@@ -17,6 +17,5 @@ struct clk;
 
 extern int clk_register(struct clk *clk);
 extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
 
 #endif

arch/arm/mach-davinci/include/mach/common.h

@@ -16,6 +16,12 @@ struct sys_timer;
 
 extern struct sys_timer davinci_timer;
 
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 

arch/arm/mach-davinci/include/mach/cputype.h

+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type.  In addtion, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+extern unsigned int davinci_rev(void);
+
+#define IS_DAVINCI_CPU(type, id)			\
+static inline int is_davinci_dm ##type(void)	        \
+{							\
+	return (davinci_rev() == (id)) ? 1 : 0;	        \
+}
+
+IS_DAVINCI_CPU(644x, 0x6446)
+IS_DAVINCI_CPU(646x, 0x6467)
+IS_DAVINCI_CPU(355, 0x355)
+
+#ifdef CONFIG_ARCH_DAVINCI_DM644x
+#define cpu_is_davinci_dm644x() is_davinci_dm644x()
+#else
+#define cpu_is_davinci_dm644x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM646x
+#define cpu_is_davinci_dm646x() is_davinci_dm646x()
+#else
+#define cpu_is_davinci_dm646x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM355
+#define cpu_is_davinci_dm355() is_davinci_dm355()
+#else
+#define cpu_is_davinci_dm355() 0
+#endif
+
+#endif

arch/arm/mach-davinci/include/mach/dm644x.h

+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE		(0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
+#define DM644X_EMAC_MDIO_OFFSET		(0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */

arch/arm/mach-davinci/include/mach/io.h

@@ -40,22 +40,12 @@
 #else
 #define IOMEM(x)                ((void __force __iomem *)(x))
 
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
- */
-#define davinci_readb(a)	__raw_readb(IO_ADDRESS(a))
-#define davinci_readw(a)	__raw_readw(IO_ADDRESS(a))
-#define davinci_readl(a)	__raw_readl(IO_ADDRESS(a))
+#define __arch_ioremap(p, s, t)	davinci_ioremap(p, s, t)
+#define __arch_iounmap(v)	davinci_iounmap(v)
 
-#define davinci_writeb(v, a)	__raw_writeb(v, IO_ADDRESS(a))
-#define davinci_writew(v, a)	__raw_writew(v, IO_ADDRESS(a))
-#define davinci_writel(v, a)	__raw_writel(v, IO_ADDRESS(a))
+void __iomem *davinci_ioremap(unsigned long phys, size_t size,
+			      unsigned int type);
+void davinci_iounmap(volatile void __iomem *addr);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ASM_ARCH_IO_H */

arch/arm/mach-davinci/usb.c

@@ -14,6 +14,8 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#define DAVINCI_USB_OTG_BASE 0x01C64000
+
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 static struct musb_hdrc_eps_bits musb_eps[] = {
 	{ "ep1_tx", 8, },

arch/arm/mach-omap1/mcbsp.c

@@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id)
 	 */
 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
 		if (dsp_use++ == 0) {
-			api_clk = clk_get(NULL, "api_clk");
-			dsp_clk = clk_get(NULL, "dsp_clk");
+			api_clk = clk_get(NULL, "api_ck");
+			dsp_clk = clk_get(NULL, "dsp_ck");
 			if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
 				clk_enable(api_clk);
 				clk_enable(dsp_clk);