Commit 1d3ecf13 authored by Alex Chiang's avatar Alex Chiang Committed by Jesse Barnes

PCI Hotplug: cpqphp: clean up cpqphp_ctrl.c

Style and whitespace cleanups, no functional change.
Signed-off-by: default avatarAlex Chiang <achiang@hp.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent 867556fe
......@@ -132,9 +132,8 @@ static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device)
{
struct slot *slot = ctrl->slot;
while (slot && (slot->device != device)) {
while (slot && (slot->device != device))
slot = slot->next;
}
return slot;
}
......@@ -549,10 +548,10 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
if (!(*head))
return NULL;
if ( cpqhp_resource_sort_and_combine(head) )
if (cpqhp_resource_sort_and_combine(head))
return NULL;
if ( sort_by_size(head) )
if (sort_by_size(head))
return NULL;
for (node = *head; node; node = node->next) {
......@@ -974,12 +973,8 @@ struct pci_func *cpqhp_slot_create(u8 busnumber)
struct pci_func *next;
new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL);
if (new_slot == NULL) {
/* I'm not dead yet!
* You will be.
*/
if (new_slot == NULL)
return new_slot;
}
new_slot->next = NULL;
new_slot->configured = 1;
......@@ -1010,10 +1005,8 @@ static int slot_remove(struct pci_func * old_slot)
return 1;
next = cpqhp_slot_list[old_slot->bus];
if (next == NULL) {
if (next == NULL)
return 1;
}
if (next == old_slot) {
cpqhp_slot_list[old_slot->bus] = old_slot->next;
......@@ -1022,9 +1015,8 @@ static int slot_remove(struct pci_func * old_slot)
return 0;
}
while ((next->next != old_slot) && (next->next != NULL)) {
while ((next->next != old_slot) && (next->next != NULL))
next = next->next;
}
if (next->next == old_slot) {
next->next = old_slot->next;
......@@ -1054,9 +1046,8 @@ static int bridge_slot_remove(struct pci_func *bridge)
for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
next = cpqhp_slot_list[tempBus];
while (!slot_remove(next)) {
while (!slot_remove(next))
next = cpqhp_slot_list[tempBus];
}
}
next = cpqhp_slot_list[bridge->bus];
......@@ -1286,17 +1277,17 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
hp_slot = func->device - ctrl->slot_device_offset;
if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) {
/*
* The switch is open.
*/
/*
* The switch is open.
*/
if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot))
rc = INTERLOCK_OPEN;
} else if (is_slot_enabled (ctrl, hp_slot)) {
/*
* The board is already on
*/
/*
* The board is already on
*/
else if (is_slot_enabled (ctrl, hp_slot))
rc = CARD_FUNCTIONING;
} else {
else {
mutex_lock(&ctrl->crit_sect);
/* turn on board without attaching to the bus */
......@@ -1542,7 +1533,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
}
/* All F's is an empty slot or an invalid board */
if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */
if (temp_register != 0xFFFFFFFF) {
res_lists.io_head = ctrl->io_head;
res_lists.mem_head = ctrl->mem_head;
res_lists.p_mem_head = ctrl->p_mem_head;
......@@ -1591,9 +1582,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
index = 0;
do {
new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
if (new_slot && !new_slot->pci_dev) {
if (new_slot && !new_slot->pci_dev)
cpqhp_configure_device(ctrl, new_slot);
}
} while (new_slot);
mutex_lock(&ctrl->crit_sect);
......@@ -2134,9 +2124,8 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
/* If the VGA Enable bit is set, remove isn't
* supported */
if (BCR & PCI_BRIDGE_CTL_VGA) {
if (BCR & PCI_BRIDGE_CTL_VGA)
rc = REMOVE_NOT_SUPPORTED;
}
}
}
......@@ -2204,67 +2193,67 @@ int cpqhp_hardware_test(struct controller *ctrl, int test_num)
num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f;
switch (test_num) {
case 1:
/* Do stuff here! */
/* Do that funky LED thing */
/* so we can restore them later */
save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
work_LED = 0x01010101;
switch_leds(ctrl, num_of_slots, &work_LED, 0);
switch_leds(ctrl, num_of_slots, &work_LED, 1);
switch_leds(ctrl, num_of_slots, &work_LED, 0);
switch_leds(ctrl, num_of_slots, &work_LED, 1);
work_LED = 0x01010000;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
switch_leds(ctrl, num_of_slots, &work_LED, 0);
switch_leds(ctrl, num_of_slots, &work_LED, 1);
work_LED = 0x00000101;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
switch_leds(ctrl, num_of_slots, &work_LED, 0);
switch_leds(ctrl, num_of_slots, &work_LED, 1);
work_LED = 0x01010000;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
for (loop = 0; loop < num_of_slots; loop++) {
set_SOGO(ctrl);
case 1:
/* Do stuff here! */
/* Do that funky LED thing */
/* so we can restore them later */
save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
work_LED = 0x01010101;
switch_leds(ctrl, num_of_slots, &work_LED, 0);
switch_leds(ctrl, num_of_slots, &work_LED, 1);
switch_leds(ctrl, num_of_slots, &work_LED, 0);
switch_leds(ctrl, num_of_slots, &work_LED, 1);
work_LED = 0x01010000;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
switch_leds(ctrl, num_of_slots, &work_LED, 0);
switch_leds(ctrl, num_of_slots, &work_LED, 1);
work_LED = 0x00000101;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
switch_leds(ctrl, num_of_slots, &work_LED, 0);
switch_leds(ctrl, num_of_slots, &work_LED, 1);
work_LED = 0x01010000;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
for (loop = 0; loop < num_of_slots; loop++) {
set_SOGO(ctrl);
/* Wait for SOGO interrupt */
wait_for_ctrl_irq (ctrl);
/* Wait for SOGO interrupt */
wait_for_ctrl_irq (ctrl);
/* Get ready for next iteration */
long_delay((3*HZ)/10);
work_LED = work_LED >> 16;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
/* Get ready for next iteration */
long_delay((3*HZ)/10);
work_LED = work_LED >> 16;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
set_SOGO(ctrl);
set_SOGO(ctrl);
/* Wait for SOGO interrupt */
wait_for_ctrl_irq (ctrl);
/* Wait for SOGO interrupt */
wait_for_ctrl_irq (ctrl);
/* Get ready for next iteration */
long_delay((3*HZ)/10);
work_LED = work_LED << 16;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
work_LED = work_LED << 1;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
}
/* Get ready for next iteration */
long_delay((3*HZ)/10);
work_LED = work_LED << 16;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
work_LED = work_LED << 1;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
}
/* put it back the way it was */
writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
/* put it back the way it was */
writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
set_SOGO(ctrl);
set_SOGO(ctrl);
/* Wait for SOBS to be unset */
wait_for_ctrl_irq (ctrl);
break;
case 2:
/* Do other stuff here! */
break;
case 3:
/* and more... */
break;
/* Wait for SOBS to be unset */
wait_for_ctrl_irq (ctrl);
break;
case 2:
/* Do other stuff here! */
break;
case 3:
/* and more... */
break;
}
return 0;
}
......@@ -2333,9 +2322,9 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
while ((function < max_functions) && (!stop_it)) {
pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
if (ID == 0xFFFFFFFF) { /* There's nothing there. */
if (ID == 0xFFFFFFFF) {
function++;
} else { /* There's something there */
} else {
/* Setup slot structure. */
new_slot = cpqhp_slot_create(func->bus);
......@@ -2360,8 +2349,8 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
/*
Configuration logic that involves the hotplug data structures and
their bookkeeping
* Configuration logic that involves the hotplug data structures and
* their bookkeeping
*/
......@@ -2414,7 +2403,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
if (rc)
return rc;
if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
/* set Primary bus */
dbg("set Primary bus = %d\n", func->bus);
rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
......@@ -2956,11 +2945,10 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
/* Program IRQ based on card type */
rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
if (class_code == PCI_BASE_CLASS_STORAGE) {
if (class_code == PCI_BASE_CLASS_STORAGE)
IRQ = cpqhp_disk_irq;
} else {
else
IRQ = cpqhp_nic_irq;
}
}
/* IRQ Line */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment