Commit 1c28c745 authored by Mark A. Greer's avatar Mark A. Greer Committed by Kevin Hilman

rtc: make rtc-omap driver ioremap its register space

The rtc-omap driver currently assumes that the rtc's
registers are at a fixed address and already mapped
into virtual memory space.  Remove those assumptions
so the same driver can be used for similar devices
that reside at different physical addresses (e.g.,
TI's DA8xx/OMAP-L13x SoC's).

Also allow the possibility for the timer and alarm
interrupts to use the same IRQ.
Signed-off-by: default avatarMark A. Greer <mgreer@mvista.com>
Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
parent 9e56b56d
......@@ -588,10 +588,11 @@ config RTC_DRV_DAVINCI
config RTC_DRV_OMAP
tristate "TI OMAP1"
depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730
depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_DAVINCI_DA8XX
help
Say "yes" here to support the real time clock on TI OMAP1 chips.
This driver can also be built as a module called rtc-omap.
Say "yes" here to support the real time clock on TI OMAP1 and
DA8xx/OMAP-L13x chips. This driver can also be built as a
module called rtc-omap.
config RTC_DRV_S3C
tristate "Samsung S3C series SoC RTC"
......
......@@ -87,9 +87,10 @@
#define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3)
#define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2)
static void __iomem *rtc_base;
#define rtc_read(addr) omap_readb(OMAP_RTC_BASE + (addr))
#define rtc_write(val, addr) omap_writeb(val, OMAP_RTC_BASE + (addr))
#define rtc_read(addr) __raw_readb(rtc_base + (addr))
#define rtc_write(val, addr) __raw_writeb(val, rtc_base + (addr))
/* we rely on the rtc framework to handle locking (rtc->ops_lock),
......@@ -330,32 +331,31 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
return -ENOENT;
}
/* NOTE: using static mapping for RTC registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res && res->start != OMAP_RTC_BASE) {
pr_debug("%s: RTC registers at %08x, expected %08x\n",
pdev->name, (unsigned) res->start, OMAP_RTC_BASE);
if (!res) {
pr_debug("%s: RTC resource data missing\n", pdev->name);
return -ENOENT;
}
if (res)
mem = request_mem_region(res->start,
res->end - res->start + 1,
pdev->name);
else
mem = NULL;
mem = request_mem_region(res->start, resource_size(res), pdev->name);
if (!mem) {
pr_debug("%s: RTC registers at %08x are not free\n",
pdev->name, OMAP_RTC_BASE);
pdev->name, res->start);
return -EBUSY;
}
rtc_base = ioremap(res->start, resource_size(res));
if (!rtc_base) {
pr_debug("%s: RTC registers can't be mapped\n", pdev->name);
goto fail;
}
rtc = rtc_device_register(pdev->name, &pdev->dev,
&omap_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
pr_debug("%s: can't register RTC device, err %ld\n",
pdev->name, PTR_ERR(rtc));
goto fail;
goto fail0;
}
platform_set_drvdata(pdev, rtc);
dev_set_drvdata(&rtc->dev, mem);
......@@ -380,13 +380,14 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
dev_name(&rtc->dev), rtc)) {
pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
pdev->name, omap_rtc_timer);
goto fail0;
goto fail1;
}
if (request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED,
dev_name(&rtc->dev), rtc)) {
if ((omap_rtc_timer != omap_rtc_alarm) &&
(request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED,
dev_name(&rtc->dev), rtc))) {
pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
pdev->name, omap_rtc_alarm);
goto fail1;
goto fail2;
}
/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
......@@ -414,10 +415,12 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
return 0;
fail1:
fail2:
free_irq(omap_rtc_timer, NULL);
fail0:
fail1:
rtc_device_unregister(rtc);
fail0:
iounmap(rtc_base);
fail:
release_resource(mem);
return -EIO;
......@@ -433,7 +436,9 @@ static int __exit omap_rtc_remove(struct platform_device *pdev)
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
free_irq(omap_rtc_timer, rtc);
free_irq(omap_rtc_alarm, rtc);
if (omap_rtc_timer != omap_rtc_alarm)
free_irq(omap_rtc_alarm, rtc);
release_resource(dev_get_drvdata(&rtc->dev));
rtc_device_unregister(rtc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment