Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (32 commits)
  USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance, clear-feature ignore
  USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance
  usb_serial: some coding style fixes
  USB: Remove redundant dependencies on USB_ATM.
  USB: UHCI: disable remote wakeup when it's not needed
  USB: OHCI: work around bogus compiler warning
  USB: add Cypress c67x00 OTG controller HCD driver
  USB: add Cypress c67x00 OTG controller core driver
  USB: add Cypress c67x00 low level interface code
  USB: airprime: unlock mutex instead of trying to lock it again
  USB: storage: Update mailling list address
  USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame.
  USB: Add the USB 2.0 extension descriptor.
  USB: add more FTDI device ids
  USB: fix cannot work usb storage when using ohci-sm501
  usb: gadget zero timer init fix
  usb: gadget zero style fixups (mostly whitespace)
  usb serial gadget: CDC ACM fixes
  usb: pxa27x_udc driver
  USB: INTOVA Pixtreme camera mass storage device
  ...

MAINTAINERS

@@ -4051,6 +4051,12 @@ L:      linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://www.kroah.com/linux-usb/
 
+USB CYPRESS C67X00 DRIVER
+P:	Peter Korsgaard
+M:	jacmet@sunsite.dk
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+
 USB DAVICOM DM9601 DRIVER
 P:	Peter Korsgaard
 M:	jacmet@sunsite.dk

drivers/block/ub.c

@@ -205,6 +205,7 @@ struct ub_scsi_cmd {
 	unsigned char key, asc, ascq;	/* May be valid if error==-EIO */
 
 	int stat_count;			/* Retries getting status. */
+	unsigned int timeo;		/* jiffies until rq->timeout changes */
 
 	unsigned int len;		/* Requested length */
 	unsigned int current_sg;
@@ -318,6 +319,7 @@ struct ub_dev {
 	int openc;			/* protected by ub_lock! */
 					/* kref is too implicit for our taste */
 	int reset;			/* Reset is running */
+	int bad_resid;
 	unsigned int tagcnt;
 	char name[12];
 	struct usb_device *dev;
@@ -764,6 +766,12 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
 	cmd->cdb_len = rq->cmd_len;
 
 	cmd->len = rq->data_len;
+
+	/*
+	 * To reapply this to every URB is not as incorrect as it looks.
+	 * In return, we avoid any complicated tracking calculations.
+	 */
+	cmd->timeo = rq->timeout;
 }
 
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
@@ -785,10 +793,6 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			scsi_status = 0;
 		} else {
 			if (cmd->act_len != cmd->len) {
-				if ((cmd->key == MEDIUM_ERROR ||
-				     cmd->key == UNIT_ATTENTION) &&
-				    ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
-					return;
 				scsi_status = SAM_STAT_CHECK_CONDITION;
 			} else {
 				scsi_status = 0;
@@ -804,7 +808,10 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			else
 				scsi_status = DID_ERROR << 16;
 		} else {
-			if (cmd->error == -EIO) {
+			if (cmd->error == -EIO &&
+			    (cmd->key == 0 ||
+			     cmd->key == MEDIUM_ERROR ||
+			     cmd->key == UNIT_ATTENTION)) {
 				if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
 					return;
 			}
@@ -1259,14 +1266,19 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			return;
 		}
 
-		len = le32_to_cpu(bcs->Residue);
-		if (len != cmd->len - cmd->act_len) {
-			/*
-			 * It is all right to transfer less, the caller has
-			 * to check. But it's not all right if the device
-			 * counts disagree with our counts.
-			 */
-			goto Bad_End;
+		if (!sc->bad_resid) {
+			len = le32_to_cpu(bcs->Residue);
+			if (len != cmd->len - cmd->act_len) {
+				/*
+				 * Only start ignoring if this cmd ended well.
+				 */
+				if (cmd->len == cmd->act_len) {
+					printk(KERN_NOTICE "%s: "
+					    "bad residual %d of %d, ignoring\n",
+					    sc->name, len, cmd->len);
+					sc->bad_resid = 1;
+				}
+			}
 		}
 
 		switch (bcs->Status) {
@@ -1297,8 +1309,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		ub_state_done(sc, cmd, -EIO);
 
 	} else {
-		printk(KERN_WARNING "%s: "
-		    "wrong command state %d\n",
+		printk(KERN_WARNING "%s: wrong command state %d\n",
 		    sc->name, cmd->state);
 		ub_state_done(sc, cmd, -EINVAL);
 		return;
@@ -1336,7 +1347,10 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		return;
 	}
 
-	sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
+	if (cmd->timeo)
+		sc->work_timer.expires = jiffies + cmd->timeo;
+	else
+		sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
 	add_timer(&sc->work_timer);
 
 	cmd->state = UB_CMDST_DATA;
@@ -1376,7 +1390,10 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		return -1;
 	}
 
-	sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
+	if (cmd->timeo)
+		sc->work_timer.expires = jiffies + cmd->timeo;
+	else
+		sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
 	add_timer(&sc->work_timer);
 	return 0;
 }
@@ -1515,8 +1532,7 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
 		return;
 	}
 	if (cmd->state != UB_CMDST_SENSE) {
-		printk(KERN_WARNING "%s: "
-		    "sense done with bad cmd state %d\n",
+		printk(KERN_WARNING "%s: sense done with bad cmd state %d\n",
 		    sc->name, cmd->state);
 		return;
 	}
@@ -1720,7 +1736,7 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp,
 }
 
 /*
- * This is called once a new disk was seen by the block layer or by ub_probe().
+ * This is called by check_disk_change if we reported a media change.
  * The main onjective here is to discover the features of the media such as
  * the capacity, read-only status, etc. USB storage generally does not
  * need to be spun up, but if we needed it, this would be the place.
@@ -2136,8 +2152,7 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
 	}
 
 	if (ep_in == NULL || ep_out == NULL) {
-		printk(KERN_NOTICE "%s: failed endpoint check\n",
-		    sc->name);
+		printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name);
 		return -ENODEV;
 	}
 
@@ -2354,7 +2369,7 @@ static void ub_disconnect(struct usb_interface *intf)
 	spin_unlock_irqrestore(&ub_lock, flags);
 
 	/*
-	 * Fence stall clearnings, operations triggered by unlinkings and so on.
+	 * Fence stall clearings, operations triggered by unlinkings and so on.
 	 * We do not attempt to unlink any URBs, because we do not trust the
 	 * unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
 	 */
@@ -2417,7 +2432,7 @@ static void ub_disconnect(struct usb_interface *intf)
 	spin_unlock_irqrestore(sc->lock, flags);
 
 	/*
-	 * There is virtually no chance that other CPU runs times so long
+	 * There is virtually no chance that other CPU runs a timeout so long
 	 * after ub_urb_complete should have called del_timer, but only if HCD
 	 * didn't forget to deliver a callback on unlink.
 	 */

drivers/usb/Makefile

@@ -17,6 +17,8 @@ obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
 
+obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
+
 obj-$(CONFIG_USB_ACM)		+= class/
 obj-$(CONFIG_USB_PRINTER)	+= class/
 

drivers/usb/atm/Kconfig

@@ -19,7 +19,6 @@ if USB_ATM
 
 config USB_SPEEDTOUCH
 	tristate "Speedtouch USB support"
-	depends on USB_ATM
 	select FW_LOADER
 	help
 	  Say Y here if you have an SpeedTouch USB or SpeedTouch 330
@@ -32,7 +31,6 @@ config USB_SPEEDTOUCH
 
 config USB_CXACRU
 	tristate "Conexant AccessRunner USB support"
-	depends on USB_ATM
 	select FW_LOADER
 	help
 	  Say Y here if you have an ADSL USB modem based on the Conexant
@@ -45,7 +43,6 @@ config USB_CXACRU
 
 config USB_UEAGLEATM
 	tristate "ADI 930 and eagle USB DSL modem"
-	depends on USB_ATM
 	select FW_LOADER
 	help
 	  Say Y here if you have an ADSL USB modem based on the ADI 930
@@ -58,7 +55,6 @@ config USB_UEAGLEATM
 
 config USB_XUSBATM
 	tristate "Other USB DSL modem support"
-	depends on USB_ATM
 	help
 	  Say Y here if you have a DSL USB modem not explicitly supported by
 	  another USB DSL drivers.  In order to use your modem you will need to

drivers/usb/c67x00/Makefile

+#
+# Makefile for Cypress C67X00 USB Controller
+#
+
+ccflags-$(CONFIG_USB_DEBUG)		+= -DDEBUG
+
+obj-$(CONFIG_USB_C67X00_HCD)		+= c67x00.o
+
+c67x00-objs := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o

drivers/usb/c67x00/c67x00-drv.c

+/*
+ * c67x00-drv.c: Cypress C67X00 USB Common infrastructure
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+/*
+ * This file implements the common infrastructure for using the c67x00.
+ * It is both the link between the platform configuration and subdrivers and
+ * the link between the common hardware parts and the subdrivers (e.g.
+ * interrupt handling).
+ *
+ * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
+ *
+ * Depending on the platform configuration, the SIE's are created and
+ * the corresponding subdriver is initialized (c67x00_probe_sie).
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/c67x00.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+static void c67x00_probe_sie(struct c67x00_sie *sie,
+			     struct c67x00_device *dev, int sie_num)
+{
+	spin_lock_init(&sie->lock);
+	sie->dev = dev;
+	sie->sie_num = sie_num;
+	sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num);
+
+	switch (sie->mode) {
+	case C67X00_SIE_HOST:
+		c67x00_hcd_probe(sie);
+		break;
+
+	case C67X00_SIE_UNUSED:
+		dev_info(sie_dev(sie),
+			 "Not using SIE %d as requested\n", sie->sie_num);
+		break;
+
+	default:
+		dev_err(sie_dev(sie),
+			"Unsupported configuration: 0x%x for SIE %d\n",
+			sie->mode, sie->sie_num);
+		break;
+	}
+}
+
+static void c67x00_remove_sie(struct c67x00_sie *sie)
+{
+	switch (sie->mode) {
+	case C67X00_SIE_HOST:
+		c67x00_hcd_remove(sie);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static irqreturn_t c67x00_irq(int irq, void *__dev)
+{
+	struct c67x00_device *c67x00 = __dev;
+	struct c67x00_sie *sie;
+	u16 msg, int_status;
+	int i, count = 8;
+
+	int_status = c67x00_ll_hpi_status(c67x00);
+	if (!int_status)
+		return IRQ_NONE;
+
+	while (int_status != 0 && (count-- >= 0)) {
+		c67x00_ll_irq(c67x00, int_status);
+		for (i = 0; i < C67X00_SIES; i++) {
+			sie = &c67x00->sie[i];
+			msg = 0;
+			if (int_status & SIEMSG_FLG(i))
+				msg = c67x00_ll_fetch_siemsg(c67x00, i);
+			if (sie->irq)
+				sie->irq(sie, int_status, msg);
+		}
+		int_status = c67x00_ll_hpi_status(c67x00);
+	}
+
+	if (int_status)
+		dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! "
+			 "status = 0x%04x\n", int_status);
+
+	return IRQ_HANDLED;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int __devinit c67x00_drv_probe(struct platform_device *pdev)
+{
+	struct c67x00_device *c67x00;
+	struct c67x00_platform_data *pdata;
+	struct resource *res, *res2;
+	int ret, i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res2)
+		return -ENODEV;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return -ENODEV;
+
+	c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL);
+	if (!c67x00)
+		return -ENOMEM;
+
+	if (!request_mem_region(res->start, res->end - res->start + 1,
+				pdev->name)) {
+		dev_err(&pdev->dev, "Memory region busy\n");
+		ret = -EBUSY;
+		goto request_mem_failed;
+	}
+	c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1);
+	if (!c67x00->hpi.base) {
+		dev_err(&pdev->dev, "Unable to map HPI registers\n");
+		ret = -EIO;
+		goto map_failed;
+	}
+
+	spin_lock_init(&c67x00->hpi.lock);
+	c67x00->hpi.regstep = pdata->hpi_regstep;
+	c67x00->pdata = pdev->dev.platform_data;
+	c67x00->pdev = pdev;
+
+	c67x00_ll_init(c67x00);
+	c67x00_ll_hpi_reg_init(c67x00);
+
+	ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto request_irq_failed;
+	}
+
+	ret = c67x00_ll_reset(c67x00);
+	if (ret) {
+		dev_err(&pdev->dev, "Device reset failed\n");
+		goto reset_failed;
+	}
+
+	for (i = 0; i < C67X00_SIES; i++)
+		c67x00_probe_sie(&c67x00->sie[i], c67x00, i);
+
+	platform_set_drvdata(pdev, c67x00);
+
+	return 0;
+
+ reset_failed:
+	free_irq(res2->start, c67x00);
+ request_irq_failed:
+	iounmap(c67x00->hpi.base);
+ map_failed:
+	release_mem_region(res->start, res->end - res->start + 1);
+ request_mem_failed:
+	kfree(c67x00);
+
+	return ret;
+}
+
+static int __devexit c67x00_drv_remove(struct platform_device *pdev)
+{
+	struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
+	struct resource *res;
+	int i;
+
+	for (i = 0; i < C67X00_SIES; i++)
+		c67x00_remove_sie(&c67x00->sie[i]);
+
+	c67x00_ll_release(c67x00);
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res)
+		free_irq(res->start, c67x00);
+
+	iounmap(c67x00->hpi.base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, res->end - res->start + 1);
+
+	kfree(c67x00);
+
+	return 0;
+}
+
+static struct platform_driver c67x00_driver = {
+	.probe	= c67x00_drv_probe,
+	.remove	= __devexit_p(c67x00_drv_remove),
+	.driver	= {
+		.owner = THIS_MODULE,
+		.name = "c67x00",
+	},
+};
+MODULE_ALIAS("platform:c67x00");
+
+static int __init c67x00_init(void)
+{
+	return platform_driver_register(&c67x00_driver);
+}
+
+static void __exit c67x00_exit(void)
+{
+	platform_driver_unregister(&c67x00_driver);
+}
+
+module_init(c67x00_init);
+module_exit(c67x00_exit);
+
+MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely");
+MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver");
+MODULE_LICENSE("GPL");

drivers/usb/c67x00/c67x00-hcd.h

+/*
+ * c67x00-hcd.h: Cypress C67X00 USB HCD
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#ifndef _USB_C67X00_HCD_H
+#define _USB_C67X00_HCD_H
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "c67x00.h"
+
+/*
+ * The following parameters depend on the CPU speed, bus speed, ...
+ * These can be tuned for specific use cases, e.g. if isochronous transfers
+ * are very important, bandwith can be sacrificed to guarantee that the
+ * 1ms deadline will be met.
+ * If bulk transfers are important, the MAX_FRAME_BW can be increased,
+ * but some (or many) isochronous deadlines might not be met.
+ *
+ * The values are specified in bittime.
+ */
+
+/*
+ * The current implementation switches between _STD (default) and _ISO (when
+ * isochronous transfers are scheduled), in order to optimize the throughput
+ * in normal cicrumstances, but also provide good isochronous behaviour.
+ *
+ * Bandwidth is described in bit time so with a 12MHz USB clock and 1ms
+ * frames; there are 12000 bit times per frame.
+ */
+
+#define TOTAL_FRAME_BW		12000
+#define DEFAULT_EOT		2250
+
+#define MAX_FRAME_BW_STD	(TOTAL_FRAME_BW - DEFAULT_EOT)
+#define MAX_FRAME_BW_ISO	2400
+
+/*
+ * Periodic transfers may only use 90% of the full frame, but as
+ * we currently don't even use 90% of the full frame, we may
+ * use the full usable time for periodic transfers.
+ */
+#define MAX_PERIODIC_BW(full_bw)	full_bw
+
+/* -------------------------------------------------------------------------- */
+
+struct c67x00_hcd {
+	spinlock_t lock;
+	struct c67x00_sie *sie;
+	unsigned int low_speed_ports;	/* bitmask of low speed ports */
+	unsigned int urb_count;
+	unsigned int urb_iso_count;
+
+	struct list_head list[4];	/* iso, int, ctrl, bulk */
+#if PIPE_BULK != 3
+#error "Sanity check failed, this code presumes PIPE_... to range from 0 to 3"
+#endif
+
+	/* USB bandwidth allocated to td_list */
+	int bandwidth_allocated;
+	/* USB bandwidth allocated for isoc/int transfer */
+	int periodic_bw_allocated;
+	struct list_head td_list;
+	int max_frame_bw;
+
+	u16 td_base_addr;
+	u16 buf_base_addr;
+	u16 next_td_addr;
+	u16 next_buf_addr;
+
+	struct tasklet_struct tasklet;
+
+	struct completion endpoint_disable;
+
+	u16 current_frame;
+	u16 last_frame;
+};
+
+static inline struct c67x00_hcd *hcd_to_c67x00_hcd(struct usb_hcd *hcd)
+{
+	return (struct c67x00_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *c67x00_hcd_to_hcd(struct c67x00_hcd *c67x00)
+{
+	return container_of((void *)c67x00, struct usb_hcd, hcd_priv);
+}
+
+/* ---------------------------------------------------------------------
+ * Functions used by c67x00-drv
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie);
+void c67x00_hcd_remove(struct c67x00_sie *sie);
+
+/* ---------------------------------------------------------------------
+ * Transfer Descriptor scheduling functions
+ */
+int c67x00_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+void c67x00_endpoint_disable(struct usb_hcd *hcd,
+			     struct usb_host_endpoint *ep);
+
+void c67x00_hcd_msg_received(struct c67x00_sie *sie, u16 msg);
+void c67x00_sched_kick(struct c67x00_hcd *c67x00);
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00);
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00);
+
+#define c67x00_hcd_dev(x)	(c67x00_hcd_to_hcd(x)->self.controller)
+
+#endif				/* _USB_C67X00_HCD_H */

drivers/usb/c67x00/c67x00.h

+/*
+ * c67x00.h: Cypress C67X00 USB register and field definitions
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ *    based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#ifndef _USB_C67X00_H
+#define _USB_C67X00_H
+
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+/* ---------------------------------------------------------------------
+ * Cypress C67x00 register definitions
+ */
+
+/* Hardware Revision Register */
+#define HW_REV_REG		0xC004
+
+/* General USB registers */
+/* ===================== */
+
+/* USB Control Register */
+#define USB_CTL_REG(x)		((x) ? 0xC0AA : 0xC08A)
+
+#define LOW_SPEED_PORT(x)	((x) ? 0x0800 : 0x0400)
+#define HOST_MODE		0x0200
+#define PORT_RES_EN(x)		((x) ? 0x0100 : 0x0080)
+#define SOF_EOP_EN(x)		((x) ? 0x0002 : 0x0001)
+
+/* USB status register - Notice it has different content in hcd/udc mode */
+#define USB_STAT_REG(x)		((x) ? 0xC0B0 : 0xC090)
+
+#define EP0_IRQ_FLG		0x0001
+#define EP1_IRQ_FLG		0x0002
+#define EP2_IRQ_FLG		0x0004
+#define EP3_IRQ_FLG		0x0008
+#define EP4_IRQ_FLG		0x0010
+#define EP5_IRQ_FLG		0x0020
+#define EP6_IRQ_FLG		0x0040
+#define EP7_IRQ_FLG		0x0080
+#define RESET_IRQ_FLG		0x0100
+#define SOF_EOP_IRQ_FLG		0x0200
+#define ID_IRQ_FLG		0x4000
+#define VBUS_IRQ_FLG		0x8000
+
+/* USB Host only registers */
+/* ======================= */
+
+/* Host n Control Register */
+#define HOST_CTL_REG(x)		((x) ? 0xC0A0 : 0xC080)
+
+#define PREAMBLE_EN		0x0080	/* Preamble enable */
+#define SEQ_SEL			0x0040	/* Data Toggle Sequence Bit Select */
+#define ISO_EN			0x0010	/* Isochronous enable  */
+#define ARM_EN			0x0001	/* Arm operation */
+
+/* Host n Interrupt Enable Register */
+#define HOST_IRQ_EN_REG(x)	((x) ? 0xC0AC : 0xC08C)
+
+#define SOF_EOP_IRQ_EN		0x0200	/* SOF/EOP Interrupt Enable  */
+#define SOF_EOP_TMOUT_IRQ_EN	0x0800	/* SOF/EOP Timeout Interrupt Enable  */
+#define ID_IRQ_EN		0x4000	/* ID interrupt enable */
+#define VBUS_IRQ_EN		0x8000	/* VBUS interrupt enable */
+#define DONE_IRQ_EN		0x0001	/* Done Interrupt Enable  */
+
+/* USB status register */
+#define HOST_STAT_MASK		0x02FD
+#define PORT_CONNECT_CHANGE(x)	((x) ? 0x0020 : 0x0010)
+#define PORT_SE0_STATUS(x)	((x) ? 0x0008 : 0x0004)
+
+/* Host Frame Register */
+#define HOST_FRAME_REG(x)	((x) ? 0xC0B6 : 0xC096)
+
+#define HOST_FRAME_MASK		0x07FF
+
+/* USB Peripheral only registers */
+/* ============================= */
+
+/* Device n Port Sel reg */
+#define DEVICE_N_PORT_SEL(x)	((x) ? 0xC0A4 : 0xC084)
+
+/* Device n Interrupt Enable Register */
+#define DEVICE_N_IRQ_EN_REG(x)	((x) ? 0xC0AC : 0xC08C)
+
+#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep)	((dev)  		\
+						 ? (0x0280 + (ep << 4)) \
+						 : (0x0200 + (ep << 4)))
+#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep)	((dev)			\
+						 ? (0x0286 + (ep << 4)) \
+						 : (0x0206 + (ep << 4)))
+
+#define DEVICE_N_ADDRESS(dev)	((dev) ? (0xC0AE) : (0xC08E))
+
+/* HPI registers */
+/* ============= */
+
+/* HPI Status register */
+#define SOFEOP_FLG(x)		(1 << ((x) ? 12 : 10))
+#define SIEMSG_FLG(x)		(1 << (4 + (x)))
+#define RESET_FLG(x)		((x) ? 0x0200 : 0x0002)
+#define DONE_FLG(x)		(1 << (2 + (x)))
+#define RESUME_FLG(x)		(1 << (6 + (x)))
+#define MBX_OUT_FLG		0x0001	/* Message out available */
+#define MBX_IN_FLG		0x0100
+#define ID_FLG			0x4000
+#define VBUS_FLG		0x8000
+
+/* Interrupt routing register */
+#define HPI_IRQ_ROUTING_REG	0x0142
+
+#define HPI_SWAP_ENABLE(x)	((x) ? 0x0100 : 0x0001)
+#define RESET_TO_HPI_ENABLE(x)	((x) ? 0x0200 : 0x0002)
+#define DONE_TO_HPI_ENABLE(x)	((x) ? 0x0008 : 0x0004)
+#define RESUME_TO_HPI_ENABLE(x)	((x) ? 0x0080 : 0x0040)
+#define SOFEOP_TO_HPI_EN(x)	((x) ? 0x2000 : 0x0800)
+#define SOFEOP_TO_CPU_EN(x)	((x) ? 0x1000 : 0x0400)
+#define ID_TO_HPI_ENABLE	0x4000
+#define VBUS_TO_HPI_ENABLE	0x8000
+
+/* SIE msg registers */
+#define SIEMSG_REG(x)		((x) ? 0x0148 : 0x0144)
+
+#define HUSB_TDListDone		0x1000
+
+#define SUSB_EP0_MSG		0x0001
+#define SUSB_EP1_MSG		0x0002
+#define SUSB_EP2_MSG		0x0004
+#define SUSB_EP3_MSG		0x0008
+#define SUSB_EP4_MSG		0x0010
+#define SUSB_EP5_MSG		0x0020
+#define SUSB_EP6_MSG		0x0040
+#define SUSB_EP7_MSG		0x0080
+#define SUSB_RST_MSG		0x0100
+#define SUSB_SOF_MSG		0x0200
+#define SUSB_CFG_MSG		0x0400
+#define SUSB_SUS_MSG		0x0800
+#define SUSB_ID_MSG	       	0x4000
+#define SUSB_VBUS_MSG		0x8000
+
+/* BIOS interrupt routines */
+
+#define SUSBx_RECEIVE_INT(x)	((x) ? 97 : 81)
+#define SUSBx_SEND_INT(x)	((x) ? 96 : 80)
+
+#define SUSBx_DEV_DESC_VEC(x)	((x) ? 0x00D4 : 0x00B4)
+#define SUSBx_CONF_DESC_VEC(x)	((x) ? 0x00D6 : 0x00B6)
+#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
+
+#define CY_HCD_BUF_ADDR		0x500	/* Base address for host */
+#define SIE_TD_SIZE		0x200	/* size of the td list */
+#define SIE_TD_BUF_SIZE		0x400	/* size of the data buffer */
+
+#define SIE_TD_OFFSET(host)	((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
+#define SIE_BUF_OFFSET(host)	(SIE_TD_OFFSET(host) + SIE_TD_SIZE)
+
+/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
+#define CY_UDC_REQ_HEADER_BASE	0x1100
+/* 8- byte request headers for IN/OUT transfers */
+#define CY_UDC_REQ_HEADER_SIZE	8
+
+#define CY_UDC_REQ_HEADER_ADDR(ep_num)	(CY_UDC_REQ_HEADER_BASE + \
+					 ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
+#define CY_UDC_DESC_BASE_ADDRESS	(CY_UDC_REQ_HEADER_ADDR(8))
+
+#define CY_UDC_BIOS_REPLACE_BASE	0x1800
+#define CY_UDC_REQ_BUFFER_BASE		0x2000
+#define CY_UDC_REQ_BUFFER_SIZE		0x0400
+#define CY_UDC_REQ_BUFFER_ADDR(ep_num)	(CY_UDC_REQ_BUFFER_BASE + \
+					 ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
+
+/* ---------------------------------------------------------------------
+ * Driver data structures
+ */
+
+struct c67x00_device;
+
+/**
+ * struct c67x00_sie - Common data associated with a SIE
+ * @lock: lock to protect this struct and the associated chip registers
+ * @private_data: subdriver dependent data
+ * @irq: subdriver dependent irq handler, set NULL when not used
+ * @dev: link to common driver structure
+ * @sie_num: SIE number on chip, starting from 0
+ * @mode: SIE mode (host/peripheral/otg/not used)
+ */
+struct c67x00_sie {
+	/* Entries to be used by the subdrivers */
+	spinlock_t lock;	/* protect this structure */
+	void *private_data;
+	void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
+
+	/* Read only: */
+	struct c67x00_device *dev;
+	int sie_num;
+	int mode;
+};
+
+#define sie_dev(s)	(&(s)->dev->pdev->dev)
+
+/**
+ * struct c67x00_lcp
+ */
+struct c67x00_lcp {
+	/* Internal use only */
+	struct mutex mutex;
+	struct completion msg_received;
+	u16 last_msg;
+};
+
+/*
+ * struct c67x00_hpi
+ */
+struct c67x00_hpi {
+	void __iomem *base;
+	int regstep;
+	spinlock_t lock;
+	struct c67x00_lcp lcp;
+};
+
+#define C67X00_SIES	2
+#define C67X00_PORTS	2
+
+/**
+ * struct c67x00_device - Common data associated with a c67x00 instance
+ * @hpi: hpi addresses
+ * @sie: array of sie's on this chip
+ * @pdev: platform device of instance
+ * @pdata: configuration provided by the platform
+ */
+struct c67x00_device {
+	struct c67x00_hpi hpi;
+	struct c67x00_sie sie[C67X00_SIES];
+	struct platform_device *pdev;
+	struct c67x00_platform_data *pdata;
+};
+
+/* ---------------------------------------------------------------------
+ * Low level interface functions
+ */
+
+/* Host Port Interface (HPI) functions */
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
+
+/* General functions */
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+			      void *data, int len);
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+			     void *data, int len);
+
+/* Host specific functions */
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
+
+/* Called by c67x00_irq to handle lcp interrupts */
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
+
+/* Setup and teardown */
+void c67x00_ll_init(struct c67x00_device *dev);
+void c67x00_ll_release(struct c67x00_device *dev);
+int c67x00_ll_reset(struct c67x00_device *dev);
+
+#endif				/* _USB_C67X00_H */

drivers/usb/core/message.c

@@ -394,7 +394,9 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	if (!io->urbs)
 		goto nomem;
 
-	urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
+	urb_flags = URB_NO_INTERRUPT;
+	if (dma)
+		urb_flags |= URB_NO_TRANSFER_DMA_MAP;
 	if (usb_pipein(pipe))
 		urb_flags |= URB_SHORT_NOT_OK;
 

drivers/usb/gadget/Kconfig

@@ -231,6 +231,26 @@ config SUPERH_BUILT_IN_M66592
 	   However, this problem is improved if change a value of
 	   NET_IP_ALIGN to 4.
 
+config USB_GADGET_PXA27X
+	boolean "PXA 27x"
+	depends on ARCH_PXA && PXA27x
+	help
+	   Intel's PXA 27x series XScale ARM v5TE processors include
+	   an integrated full speed USB 1.1 device controller.
+
+	   It has up to 23 endpoints, as well as endpoint zero (for
+	   control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "pxa27x_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+	tristate
+	depends on USB_GADGET_PXA27X
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_GOKU
 	boolean "Toshiba TC86C001 'Goku-S'"
 	depends on PCI

drivers/usb/gadget/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
 obj-$(CONFIG_USB_AMD5536UDC)	+= amd5536udc.o
 obj-$(CONFIG_USB_PXA2XX)	+= pxa2xx_udc.o
+obj-$(CONFIG_USB_PXA27X)	+= pxa27x_udc.o
 obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
 obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
 obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o

drivers/usb/gadget/ether.c

@@ -235,10 +235,6 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define	DEV_CONFIG_CDC
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA27X
-#define DEV_CONFIG_CDC
-#endif
-
 #ifdef CONFIG_USB_GADGET_S3C2410
 #define DEV_CONFIG_CDC
 #endif
@@ -270,6 +266,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define	DEV_CONFIG_SUBSET
 #endif
 
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define	DEV_CONFIG_SUBSET
+#endif
+
 #ifdef CONFIG_USB_GADGET_SUPERH
 #define	DEV_CONFIG_SUBSET
 #endif

drivers/usb/gadget/file_storage.c

@@ -2307,6 +2307,29 @@ static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
 	return rc;
 }
 
+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+	int	rc;
+
+	DBG(fsg, "bulk-in set wedge\n");
+	rc = usb_ep_set_wedge(fsg->bulk_in);
+	if (rc == -EAGAIN)
+		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
+	while (rc != 0) {
+		if (rc != -EAGAIN) {
+			WARN(fsg, "usb_ep_set_wedge -> %d\n", rc);
+			rc = 0;
+			break;
+		}
+
+		/* Wait for a short time and then try again */
+		if (msleep_interruptible(100) != 0)
+			return -EINTR;
+		rc = usb_ep_set_wedge(fsg->bulk_in);
+	}
+	return rc;
+}
+
 static int pad_with_zeros(struct fsg_dev *fsg)
 {
 	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
@@ -2957,7 +2980,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 		 * We aren't required to halt the OUT endpoint; instead
 		 * we can simply accept and discard any data received
 		 * until the next reset. */
-		halt_bulk_in_endpoint(fsg);
+		wedge_bulk_in_endpoint(fsg);
 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 		return -EINVAL;
 	}

drivers/usb/gadget/serial.c

@@ -135,7 +135,10 @@ struct gs_port {
 	int			port_in_use;	/* open/close in progress */
 	wait_queue_head_t	port_write_wait;/* waiting to write */
 	struct gs_buf		*port_write_buf;
-	struct usb_cdc_line_coding	port_line_coding;
+	struct usb_cdc_line_coding port_line_coding;	/* 8-N-1 etc */
+	u16			port_handshake_bits;
+#define RS232_RTS	(1 << 1)
+#define RS232_DTE	(1 << 0)
 };
 
 /* the device structure holds info for the USB device */
@@ -199,6 +202,8 @@ static int gs_setup_standard(struct usb_gadget *gadget,
 static int gs_setup_class(struct usb_gadget *gadget,
 	const struct usb_ctrlrequest *ctrl);
 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+	struct usb_request *req);
 static void gs_disconnect(struct usb_gadget *gadget);
 static int gs_set_config(struct gs_dev *dev, unsigned config);
 static void gs_reset_config(struct gs_dev *dev);
@@ -406,7 +411,7 @@ static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
 	.bLength =		sizeof(gs_acm_descriptor),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
-	.bmCapabilities =	0,
+	.bmCapabilities =	(1 << 1),
 };
 
 static const struct usb_cdc_union_desc gs_union_desc = {
@@ -1502,6 +1507,8 @@ static int gs_setup(struct usb_gadget *gadget,
 	u16 wValue = le16_to_cpu(ctrl->wValue);
 	u16 wLength = le16_to_cpu(ctrl->wLength);
 
+	req->complete = gs_setup_complete;
+
 	switch (ctrl->bRequestType & USB_TYPE_MASK) {
 	case USB_TYPE_STANDARD:
 		ret = gs_setup_standard(gadget,ctrl);
@@ -1679,18 +1686,14 @@ static int gs_setup_class(struct usb_gadget *gadget,
 
 	switch (ctrl->bRequest) {
 	case USB_CDC_REQ_SET_LINE_CODING:
-		/* FIXME Submit req to read the data; have its completion
-		 * handler copy that data to port->port_line_coding (iff
-		 * it's valid) and maybe pass it on.  Until then, fail.
-		 */
-		pr_warning("gs_setup: set_line_coding "
-				"unuspported\n");
+		if (wLength != sizeof(struct usb_cdc_line_coding))
+			break;
+		ret = wLength;
+		req->complete = gs_setup_complete_set_line_coding;
 		break;
 
 	case USB_CDC_REQ_GET_LINE_CODING:
-		port = dev->dev_port[0];	/* ACM only has one port */
-		ret = min(wLength,
-			(u16)sizeof(struct usb_cdc_line_coding));
+		ret = min_t(int, wLength, sizeof(struct usb_cdc_line_coding));
 		if (port) {
 			spin_lock(&port->port_lock);
 			memcpy(req->buf, &port->port_line_coding, ret);
@@ -1699,15 +1702,27 @@ static int gs_setup_class(struct usb_gadget *gadget,
 		break;
 
 	case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
-		/* FIXME Submit req to read the data; have its completion
-		 * handler use that to set the state (iff it's valid) and
-		 * maybe pass it on.  Until then, fail.
-		 */
-		pr_warning("gs_setup: set_control_line_state "
-				"unuspported\n");
+		if (wLength != 0)
+			break;
+		ret = 0;
+		if (port) {
+			/* REVISIT:  we currently just remember this data.
+			 * If we change that, update whatever hardware needs
+			 * updating.
+			 */
+			spin_lock(&port->port_lock);
+			port->port_handshake_bits = wValue;
+			spin_unlock(&port->port_lock);
+		}
 		break;
 
 	default:
+		/* NOTE:  strictly speaking, we should accept AT-commands
+		 * using SEND_ENCPSULATED_COMMAND/GET_ENCAPSULATED_RESPONSE.
+		 * But our call management descriptor says we don't handle
+		 * call management, so we should be able to get by without
+		 * handling those "required" commands (except by stalling).
+		 */
 		pr_err("gs_setup: unknown class request, "
 				"type=%02x, request=%02x, value=%04x, "
 				"index=%04x, length=%d\n",
@@ -1719,6 +1734,42 @@ static int gs_setup_class(struct usb_gadget *gadget,
 	return ret;
 }
 
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	struct gs_dev *dev = ep->driver_data;
+	struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+
+	switch (req->status) {
+	case 0:
+		/* normal completion */
+		if (req->actual != sizeof(port->port_line_coding))
+			usb_ep_set_halt(ep);
+		else if (port) {
+			struct usb_cdc_line_coding	*value = req->buf;
+
+			/* REVISIT:  we currently just remember this data.
+			 * If we change that, (a) validate it first, then
+			 * (b) update whatever hardware needs updating.
+			 */
+			spin_lock(&port->port_lock);
+			port->port_line_coding = *value;
+			spin_unlock(&port->port_lock);
+		}
+		break;
+
+	case -ESHUTDOWN:
+		/* disconnect */
+		gs_free_req(ep, req);
+		break;
+
+	default:
+		/* unexpected */
+		break;
+	}
+	return;
+}
+
 /*
  * gs_setup_complete
  */
@@ -1906,6 +1957,11 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
 		}
 	}
 
+	/* REVISIT the ACM mode should be able to actually *issue* some
+	 * notifications, for at least serial state change events if
+	 * not also for network connection; say so in bmCapabilities.
+	 */
+
 	pr_info("gs_set_config: %s configured, %s speed %s config\n",
 		GS_LONG_NAME,
 		gadget->speed == USB_SPEED_HIGH ? "high" : "full",

drivers/usb/host/Kconfig

@@ -4,6 +4,19 @@
 comment "USB Host Controller Drivers"
 	depends on USB
 
+config USB_C67X00_HCD
+	tristate "Cypress C67x00 HCD support"
+	depends on USB
+	help
+	  The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
+	  host/peripheral/OTG USB controllers.
+
+	  Enable this option to support this chip in host controller mode.
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called c67x00.
+
 config USB_EHCI_HCD
 	tristate "EHCI HCD (USB 2.0) support"
 	depends on USB && USB_ARCH_HAS_EHCI
@@ -95,6 +108,32 @@ config USB_ISP116X_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp116x-hcd.
 
+config USB_ISP1760_HCD
+	tristate "ISP 1760 HCD support"
+	depends on USB && EXPERIMENTAL
+	---help---
+	  The ISP1760 chip is a USB 2.0 host controller.
+
+	  This driver does not support isochronous transfers or OTG.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1760-hcd.
+
+config USB_ISP1760_PCI
+	bool "Support for the PCI bus"
+	depends on USB_ISP1760_HCD && PCI
+	---help---
+	  Enables support for the device present on the PCI bus.
+	  This should only be required if you happen to have the eval kit from
+	  NXP and you are going to test it.
+
+config USB_ISP1760_OF
+	bool "Support for the OF platform bus"
+	depends on USB_ISP1760_HCD && OF
+	---help---
+	  Enables support for the device present on the PowerPC
+	  OpenFirmware platform bus.
+
 config USB_OHCI_HCD
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI

drivers/usb/host/Makefile

@@ -6,6 +6,8 @@ ifeq ($(CONFIG_USB_DEBUG),y)
 	EXTRA_CFLAGS		+= -DDEBUG
 endif
 
+isp1760-objs := isp1760-hcd.o isp1760-if.o
+
 obj-$(CONFIG_PCI)		+= pci-quirks.o
 
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
@@ -16,4 +18,4 @@ obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
 obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
-
+obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o

drivers/usb/host/isp1760-hcd.h

+#ifndef _ISP1760_HCD_H_
+#define _ISP1760_HCD_H_
+
+/* exports for if */
+struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
+		u64 irqflags, struct device *dev, const char *busname);
+int init_kmem_once(void);
+void deinit_kmem_cache(void);
+
+/* EHCI capability registers */
+#define HC_CAPLENGTH		0x00
+#define HC_HCSPARAMS		0x04
+#define HC_HCCPARAMS		0x08
+
+/* EHCI operational registers */
+#define HC_USBCMD		0x20
+#define HC_USBSTS		0x24
+#define HC_FRINDEX		0x2c
+#define HC_CONFIGFLAG		0x60
+#define HC_PORTSC1		0x64
+#define HC_ISO_PTD_DONEMAP_REG	0x130
+#define HC_ISO_PTD_SKIPMAP_REG	0x134
+#define HC_ISO_PTD_LASTPTD_REG	0x138
+#define HC_INT_PTD_DONEMAP_REG	0x140
+#define HC_INT_PTD_SKIPMAP_REG	0x144
+#define HC_INT_PTD_LASTPTD_REG	0x148
+#define HC_ATL_PTD_DONEMAP_REG	0x150
+#define HC_ATL_PTD_SKIPMAP_REG	0x154
+#define HC_ATL_PTD_LASTPTD_REG	0x158
+
+/* Configuration Register */
+#define HC_HW_MODE_CTRL		0x300
+#define ALL_ATX_RESET		(1 << 31)
+#define HW_DATA_BUS_32BIT	(1 << 8)
+#define HW_DACK_POL_HIGH	(1 << 6)
+#define HW_DREQ_POL_HIGH	(1 << 5)
+#define HW_INTR_HIGH_ACT	(1 << 2)
+#define HW_INTR_EDGE_TRIG	(1 << 1)
+#define HW_GLOBAL_INTR_EN	(1 << 0)
+
+#define HC_CHIP_ID_REG		0x304
+#define HC_SCRATCH_REG		0x308
+
+#define HC_RESET_REG		0x30c
+#define SW_RESET_RESET_HC	(1 << 1)
+#define SW_RESET_RESET_ALL	(1 << 0)
+
+#define HC_BUFFER_STATUS_REG	0x334
+#define ATL_BUFFER		0x1
+#define INT_BUFFER		0x2
+#define ISO_BUFFER		0x4
+#define BUFFER_MAP		0x7
+
+#define HC_MEMORY_REG		0x33c
+#define HC_PORT1_CTRL		0x374
+#define PORT1_POWER		(3 << 3)
+#define PORT1_INIT1		(1 << 7)
+#define PORT1_INIT2		(1 << 23)
+
+/* Interrupt Register */
+#define HC_INTERRUPT_REG	0x310
+
+#define HC_INTERRUPT_ENABLE	0x314
+#define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
+#define FINAL_HW_CONFIG	(HW_GLOBAL_INTR_EN | HW_DATA_BUS_32BIT)
+
+#define HC_ISO_INT		(1 << 9)
+#define HC_ATL_INT		(1 << 8)
+#define HC_INTL_INT		(1 << 7)
+#define HC_EOT_INT		(1 << 3)
+#define HC_SOT_INT		(1 << 1)
+
+#define HC_ISO_IRQ_MASK_OR_REG	0x318
+#define HC_INT_IRQ_MASK_OR_REG	0x31C
+#define HC_ATL_IRQ_MASK_OR_REG	0x320
+#define HC_ISO_IRQ_MASK_AND_REG	0x324
+#define HC_INT_IRQ_MASK_AND_REG	0x328
+#define HC_ATL_IRQ_MASK_AND_REG	0x32C
+
+/* Register sets */
+#define HC_BEGIN_OF_ATL		0x0c00
+#define HC_BEGIN_OF_INT		0x0800
+#define HC_BEGIN_OF_ISO		0x0400
+#define HC_BEGIN_OF_PAYLOAD	0x1000
+
+/* urb state*/
+#define DELETE_URB		(0x0008)
+#define NO_TRANSFER_ACTIVE	(0xffffffff)
+
+#define ATL_REGS_OFFSET		(0xc00)
+#define INT_REGS_OFFSET		(0x800)
+
+/* Philips Transfer Descriptor (PTD) */
+struct ptd {
+	__le32 dw0;
+	__le32 dw1;
+	__le32 dw2;
+	__le32 dw3;
+	__le32 dw4;
+	__le32 dw5;
+	__le32 dw6;
+	__le32 dw7;
+};
+
+struct inter_packet_info {
+	void *data_buffer;
+	u32 payload;
+#define PTD_FIRE_NEXT		(1 << 0)
+#define PTD_URB_FINISHED	(1 << 1)
+	struct urb *urb;
+	struct isp1760_qh *qh;
+	struct isp1760_qtd *qtd;
+};
+
+
+typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
+		struct isp1760_qtd *qtd);
+
+#define isp1760_info(priv, fmt, args...) \
+	dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
+#define isp1760_err(priv, fmt, args...) \
+	dev_err(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
+/* chip memory management */
+struct memory_chunk {
+	unsigned int start;
+	unsigned int size;
+	unsigned int free;
+};
+
+/*
+ * 60kb divided in:
+ * - 32 blocks @ 256  bytes
+ * - 20 blocks @ 1024 bytes
+ * -  4 blocks @ 8192 bytes
+ */
+
+#define BLOCK_1_NUM 32
+#define BLOCK_2_NUM 20
+#define BLOCK_3_NUM 4
+
+#define BLOCK_1_SIZE 256
+#define BLOCK_2_SIZE 1024
+#define BLOCK_3_SIZE 8192
+#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
+#define PAYLOAD_SIZE 0xf000
+
+/* I saw if some reloads if the pointer was negative */
+#define ISP1760_NULL_POINTER	(0x400)
+
+/* ATL */
+/* DW0 */
+#define PTD_VALID			1
+#define PTD_LENGTH(x)			(((u32) x) << 3)
+#define PTD_MAXPACKET(x)		(((u32) x) << 18)
+#define PTD_MULTI(x)			(((u32) x) << 29)
+#define PTD_ENDPOINT(x)			(((u32)	x) << 31)
+/* DW1 */
+#define PTD_DEVICE_ADDR(x)		(((u32) x) << 3)
+#define PTD_PID_TOKEN(x)		(((u32) x) << 10)
+#define PTD_TRANS_BULK			((u32) 2 << 12)
+#define PTD_TRANS_INT			((u32) 3 << 12)
+#define PTD_TRANS_SPLIT			((u32) 1 << 14)
+#define PTD_SE_USB_LOSPEED		((u32) 2 << 16)
+#define PTD_PORT_NUM(x)			(((u32) x) << 18)
+#define PTD_HUB_NUM(x)			(((u32) x) << 25)
+#define PTD_PING(x)			(((u32) x) << 26)
+/* DW2 */
+#define PTD_RL_CNT(x)			(((u32) x) << 25)
+#define PTD_DATA_START_ADDR(x)		(((u32) x) << 8)
+#define BASE_ADDR			0x1000
+/* DW3 */
+#define PTD_CERR(x)			(((u32) x) << 23)
+#define PTD_NAC_CNT(x)			(((u32) x) << 19)
+#define PTD_ACTIVE			((u32) 1 << 31)
+#define PTD_DATA_TOGGLE(x)		(((u32) x) << 25)
+
+#define DW3_HALT_BIT			(1 << 30)
+#define DW3_ERROR_BIT			(1 << 28)
+#define DW3_QTD_ACTIVE			(1 << 31)
+
+#define INT_UNDERRUN			(1 << 2)
+#define INT_BABBLE			(1 << 1)
+#define INT_EXACT			(1 << 0)
+
+#define DW1_GET_PID(x)			(((x) >> 10) & 0x3)
+#define PTD_XFERRED_LENGTH(x)		((x) & 0x7fff)
+#define PTD_XFERRED_LENGTH_LO(x)	((x) & 0x7ff)
+
+#define SETUP_PID	(2)
+#define IN_PID		(1)
+#define OUT_PID		(0)
+#define GET_QTD_TOKEN_TYPE(x)	((x) & 0x3)
+
+#define DATA_TOGGLE		(1 << 31)
+#define GET_DATA_TOGGLE(x)	((x) >> 31)
+
+/* Errata 1 */
+#define RL_COUNTER	(0)
+#define NAK_COUNTER	(0)
+#define ERR_COUNTER	(2)
+
+#define HC_ATL_PL_SIZE	(8192)
+
+#endif

drivers/usb/host/ohci-hub.c

@@ -613,7 +613,7 @@ static void start_hnp(struct ohci_hcd *ohci);
 static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
 {
 	__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
-	u32	temp;
+	u32	temp = 0;
 	u16	now = ohci_readl(ohci, &ohci->regs->fmnumber);
 	u16	reset_done = now + PORT_RESET_MSEC;
 	int	limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);

drivers/usb/host/uhci-hcd.h

@@ -400,8 +400,9 @@ struct uhci_hcd {
 	unsigned int scan_in_progress:1;	/* Schedule scan is running */
 	unsigned int need_rescan:1;		/* Redo the schedule scan */
 	unsigned int dead:1;			/* Controller has died */
-	unsigned int working_RD:1;		/* Suspended root hub doesn't
-						   need to be polled */
+	unsigned int RD_enable:1;		/* Suspended root hub with
+						   Resume-Detect interrupts
+						   enabled */
 	unsigned int is_initialized:1;		/* Data structure is usable */
 	unsigned int fsbr_is_on:1;		/* FSBR is turned on */
 	unsigned int fsbr_is_wanted:1;		/* Does any URB want FSBR? */

drivers/usb/serial/ch341.c

@@ -130,7 +130,7 @@ static int ch341_get_status(struct usb_device *dev)
 		return -ENOMEM;
 
 	r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
-	if ( r < 0)
+	if (r < 0)
 		goto out;
 
 	/* Not having the datasheet for the CH341, we ignore the bytes returned

drivers/usb/serial/ftdi_sio.c

@@ -133,6 +133,14 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },

drivers/usb/serial/ftdi_sio.h

@@ -40,6 +40,17 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
 #define FTDI_ACTZWAVE_PID	0xF2D0
 

drivers/usb/serial/mos7840.c

@@ -1713,7 +1713,7 @@ static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
 {
 	struct moschip_port *mos7840_port;
 	unsigned int mcr;
-	unsigned int status;
+	int status;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -1740,11 +1740,10 @@ static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
 
 	mos7840_port->shadowMCR = mcr;
 
-	status = 0;
 	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
 	if (status < 0) {
 		dbg("setting MODEM_CONTROL_REGISTER Failed\n");
-		return -1;
+		return status;
 	}
 
 	return 0;

drivers/usb/storage/libusual.c

@@ -135,7 +135,7 @@ static int usu_probe(struct usb_interface *intf,
 	stat[type].fls |= USU_MOD_FL_THREAD;
 	spin_unlock_irqrestore(&usu_lock, flags);
 
-	task = kthread_run(usu_probe_thread, (void*)type, "libusual_%d", type);
+	task = kthread_run(usu_probe_thread, (void*)type, "libusual_%ld", type);
 	if (IS_ERR(task)) {
 		rc = PTR_ERR(task);
 		printk(KERN_WARNING "libusual: "