Commit 1bd751c1 authored by Alan Cox's avatar Alan Cox Committed by Greg Kroah-Hartman

Staging: et131x: Clean up rxdma_csr

This is another set of flags as typedef that can be cleaned up.
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 13a79c69
......@@ -292,45 +292,25 @@ typedef struct _TXDMA_t { /* Location: */
/*
* structure for control status reg in rxdma address map
* Located at address 0x2000
*
* CSR
* 0: halt
* 1-3: tc
* 4: fbr_big_endian
* 5: psr_big_endian
* 6: pkt_big_endian
* 7: dma_big_endian
* 8-9: fbr0_size
* 10: fbr0_enable
* 11-12: fbr1_size
* 13: fbr1_enable
* 14: unused
* 15: pkt_drop_disable
* 16: pkt_done_flush
* 17: halt_status
* 18-31: unused
*/
typedef union _RXDMA_CSR_t {
u32 value;
struct {
#ifdef _BIT_FIELDS_HTOL
u32 unused2:14; /* bits 18-31 */
u32 halt_status:1; /* bit 17 */
u32 pkt_done_flush:1; /* bit 16 */
u32 pkt_drop_disable:1; /* bit 15 */
u32 unused1:1; /* bit 14 */
u32 fbr1_enable:1; /* bit 13 */
u32 fbr1_size:2; /* bits 11-12 */
u32 fbr0_enable:1; /* bit 10 */
u32 fbr0_size:2; /* bits 8-9 */
u32 dma_big_endian:1; /* bit 7 */
u32 pkt_big_endian:1; /* bit 6 */
u32 psr_big_endian:1; /* bit 5 */
u32 fbr_big_endian:1; /* bit 4 */
u32 tc:3; /* bits 1-3 */
u32 halt:1; /* bit 0 */
#else
u32 halt:1; /* bit 0 */
u32 tc:3; /* bits 1-3 */
u32 fbr_big_endian:1; /* bit 4 */
u32 psr_big_endian:1; /* bit 5 */
u32 pkt_big_endian:1; /* bit 6 */
u32 dma_big_endian:1; /* bit 7 */
u32 fbr0_size:2; /* bits 8-9 */
u32 fbr0_enable:1; /* bit 10 */
u32 fbr1_size:2; /* bits 11-12 */
u32 fbr1_enable:1; /* bit 13 */
u32 unused1:1; /* bit 14 */
u32 pkt_drop_disable:1; /* bit 15 */
u32 pkt_done_flush:1; /* bit 16 */
u32 halt_status:1; /* bit 17 */
u32 unused2:14; /* bits 18-31 */
#endif
} bits;
} RXDMA_CSR_t, *PRXDMA_CSR_t;
/*
* structure for dma writeback lo reg in rxdma address map
......@@ -521,7 +501,7 @@ typedef union _RXDMA_CSR_t {
* Located at address 0x2000
*/
typedef struct _RXDMA_t { /* Location: */
RXDMA_CSR_t csr; /* 0x2000 */
u32 csr; /* 0x2000 */
u32 dma_wb_base_lo; /* 0x2004 */
u32 dma_wb_base_hi; /* 0x2008 */
u32 num_pkt_done; /* 0x200C */
......
......@@ -720,18 +720,17 @@ void SetRxDmaTimer(struct et131x_adapter *etdev)
*/
void et131x_rx_dma_disable(struct et131x_adapter *etdev)
{
RXDMA_CSR_t csr;
u32 csr;
/* Setup the receive dma configuration register */
writel(0x00002001, &etdev->regs->rxdma.csr.value);
csr.value = readl(&etdev->regs->rxdma.csr.value);
if (csr.bits.halt_status != 1) {
writel(0x00002001, &etdev->regs->rxdma.csr);
csr = readl(&etdev->regs->rxdma.csr);
if ((csr & 0x00020000) != 1) { /* Check halt status (bit 17) */
udelay(5);
csr.value = readl(&etdev->regs->rxdma.csr.value);
if (csr.bits.halt_status != 1)
csr = readl(&etdev->regs->rxdma.csr);
if ((csr & 0x00020000) != 1)
dev_err(&etdev->pdev->dev,
"RX Dma failed to enter halt state. CSR 0x%08x\n",
csr.value);
"RX Dma failed to enter halt state. CSR 0x%08x\n",
csr);
}
}
......@@ -742,34 +741,33 @@ void et131x_rx_dma_disable(struct et131x_adapter *etdev)
void et131x_rx_dma_enable(struct et131x_adapter *etdev)
{
/* Setup the receive dma configuration register for normal operation */
RXDMA_CSR_t csr = { 0 };
u32 csr = 0x2000; /* FBR1 enable */
csr.bits.fbr1_enable = 1;
if (etdev->RxRing.Fbr1BufferSize == 4096)
csr.bits.fbr1_size = 1;
csr |= 0x0800;
else if (etdev->RxRing.Fbr1BufferSize == 8192)
csr.bits.fbr1_size = 2;
csr |= 0x1000;
else if (etdev->RxRing.Fbr1BufferSize == 16384)
csr.bits.fbr1_size = 3;
csr |= 0x1800;
#ifdef USE_FBR0
csr.bits.fbr0_enable = 1;
csr |= 0x0400; /* FBR0 enable */
if (etdev->RxRing.Fbr0BufferSize == 256)
csr.bits.fbr0_size = 1;
csr |= 0x0100;
else if (etdev->RxRing.Fbr0BufferSize == 512)
csr.bits.fbr0_size = 2;
csr |= 0x0200;
else if (etdev->RxRing.Fbr0BufferSize == 1024)
csr.bits.fbr0_size = 3;
csr |= 0x0300;
#endif
writel(csr.value, &etdev->regs->rxdma.csr.value);
writel(csr, &etdev->regs->rxdma.csr);
csr.value = readl(&etdev->regs->rxdma.csr.value);
if (csr.bits.halt_status != 0) {
csr = readl(&etdev->regs->rxdma.csr);
if ((csr & 0x00020000) != 0) {
udelay(5);
csr.value = readl(&etdev->regs->rxdma.csr.value);
if (csr.bits.halt_status != 0) {
csr = readl(&etdev->regs->rxdma.csr);
if ((csr & 0x00020000) != 0) {
dev_err(&etdev->pdev->dev,
"RX Dma failed to exit halt state. CSR 0x%08x\n",
csr.value);
csr);
}
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment