CRIS v32: Add new driver files for Artpec-3.

Adds gpio and nandflash handling for Artpec-3.

arch/cris/arch-v32/drivers/mach-a3/Makefile

+#
+# Makefile for Etrax-specific drivers
+#
+
+obj-$(CONFIG_ETRAX_NANDFLASH)   += nandflash.o
+obj-$(CONFIG_ETRAX_GPIO)        += gpio.o

arch/cris/arch-v32/drivers/mach-a3/nandflash.c

+/*
+ *  arch/cris/arch-v32/drivers/nandflash.c
+ *
+ *  Copyright (c) 2007
+ *
+ *  Derived from drivers/mtd/nand/spia.c
+ *	  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/arch/memmap.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/pio_defs.h>
+#include <pinmux.h>
+#include <asm/io.h>
+
+#define MANUAL_ALE_CLE_CONTROL 1
+
+#define regf_ALE	a0
+#define regf_CLE	a1
+#define regf_NCE	ce0_n
+
+#define CLE_BIT 10
+#define ALE_BIT 11
+#define CE_BIT 12
+
+/* Bitmask for control pins */
+#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT))
+
+static struct mtd_info *crisv32_mtd;
+/*
+ *	hardware specific access to control-lines
+ */
+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd,
+			      unsigned int ctrl)
+{
+	unsigned long flags;
+	reg_pio_rw_dout dout;
+	struct nand_chip *this = mtd->priv;
+
+	local_irq_save(flags);
+
+	/* control bits change */
+	if (ctrl & NAND_CTRL_CHANGE) {
+		dout = REG_RD(pio, regi_pio, rw_dout);
+		dout.regf_NCE = (ctrl & NAND_NCE) ? 0 : 1;
+
+#if !MANUAL_ALE_CLE_CONTROL
+		if (ctrl & NAND_ALE) {
+			/* A0 = ALE high */
+			this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+				regi_pio, rw_io_access1);
+		} else if (ctrl & NAND_CLE) {
+			/* A1 = CLE high */
+			this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+				regi_pio, rw_io_access2);
+		} else {
+			/* A1 = CLE and A0 = ALE low */
+			this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio,
+				regi_pio, rw_io_access0);
+		}
+#else
+
+		dout.regf_CLE = (ctrl & NAND_CLE) ? 1 : 0;
+		dout.regf_ALE = (ctrl & NAND_ALE) ? 1 : 0;
+#endif
+		REG_WR(pio, regi_pio, rw_dout, dout);
+	}
+
+	/* command to chip */
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+
+	local_irq_restore(flags);
+}
+
+/*
+*	read device ready pin
+*/
+int crisv32_device_ready(struct mtd_info *mtd)
+{
+	reg_pio_r_din din = REG_RD(pio, regi_pio, r_din);
+	return din.rdy;
+}
+
+/*
+ * Main initialization routine
+ */
+struct mtd_info *__init crisv32_nand_flash_probe(void)
+{
+	void __iomem *read_cs;
+	void __iomem *write_cs;
+
+	struct nand_chip *this;
+	int err = 0;
+
+	reg_pio_rw_man_ctrl man_ctrl = {
+		.regf_NCE = regk_pio_yes,
+#if MANUAL_ALE_CLE_CONTROL
+		.regf_ALE = regk_pio_yes,
+		.regf_CLE = regk_pio_yes
+#endif
+	};
+	reg_pio_rw_oe oe = {
+		.regf_NCE = regk_pio_yes,
+#if MANUAL_ALE_CLE_CONTROL
+		.regf_ALE = regk_pio_yes,
+		.regf_CLE = regk_pio_yes
+#endif
+	};
+	reg_pio_rw_dout dout = { .regf_NCE = 1 };
+
+	/* Allocate pio pins to pio */
+	crisv32_pinmux_alloc_fixed(pinmux_pio);
+	/* Set up CE, ALE, CLE (ce0_n, a0, a1) for manual control and output */
+	REG_WR(pio, regi_pio, rw_man_ctrl, man_ctrl);
+	REG_WR(pio, regi_pio, rw_dout, dout);
+	REG_WR(pio, regi_pio, rw_oe, oe);
+
+	/* Allocate memory for MTD device structure and private data */
+	crisv32_mtd = kmalloc(sizeof(struct mtd_info) +
+		sizeof(struct nand_chip), GFP_KERNEL);
+	if (!crisv32_mtd) {
+		printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD "
+			"device structure.\n");
+		err = -ENOMEM;
+		return NULL;
+	}
+
+	read_cs = write_cs = (void __iomem *)REG_ADDR(pio, regi_pio,
+		rw_io_access0);
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&crisv32_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	crisv32_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = read_cs;
+	this->IO_ADDR_W = write_cs;
+	this->cmd_ctrl = crisv32_hwcontrol;
+	this->dev_ready = crisv32_device_ready;
+	/* 20 us command delay time */
+	this->chip_delay = 20;
+	this->ecc.mode = NAND_ECC_SOFT;
+
+	/* Enable the following for a flash based bad block table */
+	/* this->options = NAND_USE_FLASH_BBT; */
+
+	/* Scan to find existance of the device */
+	if (nand_scan(crisv32_mtd, 1)) {
+		err = -ENXIO;
+		goto out_mtd;
+	}
+
+	return crisv32_mtd;
+
+out_mtd:
+	kfree(crisv32_mtd);
+	return NULL;
+}
+