[ALSA] emu10k1: Add Audio capture support for Audigy 2 ZS Notebook.

Implement functionallity in order to fixe ALSA bug#2058.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

include/sound/emu10k1.h

@@ -1427,6 +1427,8 @@ struct snd_emu10k1 {
 	spinlock_t memblk_lock;
 
 	unsigned int spdif_bits[3];		/* s/pdif out setup */
+	unsigned int i2c_capture_source;
+	u8 i2c_capture_volume[4][2];
 
 	struct snd_emu10k1_fx8010 fx8010;		/* FX8010 info */
 	int gpr_base;
@@ -1532,6 +1534,7 @@ void snd_emu10k1_ptr_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned i
 unsigned int snd_emu10k1_ptr20_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn);
 void snd_emu10k1_ptr20_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned int chn, unsigned int data);
 int snd_emu10k1_spi_write(struct snd_emu10k1 * emu, unsigned int data);
+int snd_emu10k1_i2c_write(struct snd_emu10k1 *emu, u32 reg, u32 value);
 int snd_emu1010_fpga_write(struct snd_emu10k1 * emu, int reg, int value);
 int snd_emu1010_fpga_read(struct snd_emu10k1 * emu, int reg, int *value);
 int snd_emu1010_fpga_link_dst_src_write(struct snd_emu10k1 * emu, int dst, int src);

sound/pci/emu10k1/emu10k1_main.c

@@ -46,6 +46,7 @@
 #include <linux/firmware.h>
 #include "p16v.h"
 #include "tina2.h"
+#include "p17v.h"
 
 
 /*************************************************************************
@@ -120,11 +121,28 @@ static unsigned int spi_dac_init[] = {
 		0x0622,
 		0x1400,
 };
+
+static unsigned int i2c_adc_init[][2] = {
+	{ 0x17, 0x00 }, /* Reset */
+	{ 0x07, 0x00 }, /* Timeout */
+	{ 0x0b, 0x22 },  /* Interface control */
+	{ 0x0c, 0x22 },  /* Master mode control */
+	{ 0x0d, 0x08 },  /* Powerdown control */
+	{ 0x0e, 0xcf },  /* Attenuation Left  0x01 = -103dB, 0xff = 24dB */
+	{ 0x0f, 0xcf },  /* Attenuation Right 0.5dB steps */
+	{ 0x10, 0x7b },  /* ALC Control 1 */
+	{ 0x11, 0x00 },  /* ALC Control 2 */
+	{ 0x12, 0x32 },  /* ALC Control 3 */
+	{ 0x13, 0x00 },  /* Noise gate control */
+	{ 0x14, 0xa6 },  /* Limiter control */
+	{ 0x15, ADC_MUX_2 },  /* ADC Mixer control. Mic for Audigy 2 ZS Notebook */
+};
 	
 static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
 {
 	unsigned int silent_page;
 	int ch;
+	u32 tmp;
 
 	/* disable audio and lock cache */
 	outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE,
@@ -163,8 +181,6 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
 
 	if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
 		/* Hacks for Alice3 to work independent of haP16V driver */
-		u32 tmp;
-
 		//Setup SRCMulti_I2S SamplingRate
 		tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
 		tmp &= 0xfffff1ff;
@@ -184,8 +200,6 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
 	}
 	if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
 		/* Hacks for Alice3 to work independent of haP16V driver */
-		u32 tmp;
-
 		snd_printk(KERN_INFO "Audigy2 value: Special config.\n");
 		//Setup SRCMulti_I2S SamplingRate
 		tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
@@ -231,6 +245,23 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
 		outl(0x76, emu->port + A_IOCFG); /* Windows uses 0x3f76 */
 
 	}
+	if (emu->card_capabilities->i2c_adc) { /* Audigy 2 ZS Notebook with ADC Wolfson WM8775 */
+		int size, n;
+
+		snd_emu10k1_ptr20_write(emu, P17V_I2S_SRC_SEL, 0, 0x2020205f);
+		tmp = inl(emu->port + A_IOCFG);
+		outl(tmp | 0x4, emu->port + A_IOCFG);  /* Set bit 2 for mic input */
+		tmp = inl(emu->port + A_IOCFG);
+		size = ARRAY_SIZE(i2c_adc_init);
+		for (n = 0; n < size; n++)
+			snd_emu10k1_i2c_write(emu, i2c_adc_init[n][0], i2c_adc_init[n][1]);
+		for (n=0; n < 4; n++) {
+			emu->i2c_capture_volume[n][0]= 0xcf;
+			emu->i2c_capture_volume[n][1]= 0xcf;
+		}
+
+	}
+
 	
 	snd_emu10k1_ptr_write(emu, PTB, 0, emu->ptb_pages.addr);
 	snd_emu10k1_ptr_write(emu, TCB, 0, 0);	/* taken from original driver */
@@ -274,6 +305,8 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
 	if (enable_ir) {	/* enable IR for SB Live */
 		if (emu->card_capabilities->emu1010) {
 			;  /* Disable all access to A_IOCFG for the emu1010 */
+		} else if (emu->card_capabilities->i2c_adc) {
+			;  /* Disable A_IOCFG for Audigy 2 ZS Notebook */
 		} else if (emu->audigy) {
 			unsigned int reg = inl(emu->port + A_IOCFG);
 			outl(reg | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
@@ -293,6 +326,8 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
 	
 	if (emu->card_capabilities->emu1010) {
 		;  /* Disable all access to A_IOCFG for the emu1010 */
+	} else if (emu->card_capabilities->i2c_adc) {
+		;  /* Disable A_IOCFG for Audigy 2 ZS Notebook */
 	} else if (emu->audigy) {	/* enable analog output */
 		unsigned int reg = inl(emu->port + A_IOCFG);
 		outl(reg | A_IOCFG_GPOUT0, emu->port + A_IOCFG);
@@ -311,6 +346,8 @@ static void snd_emu10k1_audio_enable(struct snd_emu10k1 *emu)
 	/* Enable analog/digital outs on audigy */
 	if (emu->card_capabilities->emu1010) {
 		;  /* Disable all access to A_IOCFG for the emu1010 */
+	} else if (emu->card_capabilities->i2c_adc) {
+		;  /* Disable A_IOCFG for Audigy 2 ZS Notebook */
 	} else if (emu->audigy) {
 		outl(inl(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG);
  
@@ -1139,10 +1176,11 @@ static struct snd_emu_chip_details emu_chip_details[] = {
 	 .adc_1361t = 1,  /* 24 bit capture instead of 16bit */
 	 .ac97_chip = 1} ,
 	/* Audigy 2 ZS Notebook Cardbus card.*/
-	/* Tested by James@superbug.co.uk 22th December 2005 */
+	/* Tested by James@superbug.co.uk 6th November 2006 */
 	/* Audio output 7.1/Headphones working.
 	 * Digital output working. (AC3 not checked, only PCM)
-	 * Audio inputs not tested.
+	 * Audio Mic/Line inputs working.
+	 * Digital input not tested.
 	 */ 
 	/* DSP: Tina2
 	 * DAC: Wolfson WM8768/WM8568
@@ -1150,6 +1188,25 @@ static struct snd_emu_chip_details emu_chip_details[] = {
 	 * AC97: None
 	 * CA0151: None
 	 */
+	/* Tested by James@superbug.co.uk 4th April 2006 */
+	/* A_IOCFG bits
+	 * Output
+	 * 0: Not Used
+	 * 1: 0 = Mute all the 7.1 channel out. 1 = unmute.
+	 * 2: Analog input 0 = line in, 1 = mic in
+	 * 3: Not Used
+	 * 4: Digital output 0 = off, 1 = on.
+	 * 5: Not Used
+	 * 6: Not Used
+	 * 7: Not Used
+	 * Input
+	 *      All bits 1 (0x3fxx) means nothing plugged in.
+	 * 8-9: 0 = Line in/Mic, 2 = Optical in, 3 = Nothing.
+	 * A-B: 0 = Headphones, 2 = Optical out, 3 = Nothing.
+	 * C-D: 2 = Front/Rear/etc, 3 = nothing.
+	 * E-F: Always 0
+	 *
+	 */
 	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x20011102,
 	 .driver = "Audigy2", .name = "Audigy 2 ZS Notebook [SB0530]", 
 	 .id = "Audigy2",
@@ -1157,6 +1214,7 @@ static struct snd_emu_chip_details emu_chip_details[] = {
 	 .ca0108_chip = 1,
 	 .ca_cardbus_chip = 1,
 	 .spi_dac = 1,
+	 .i2c_adc = 1,
 	 .spk71 = 1} ,
 	{.vendor = 0x1102, .device = 0x0008, 
 	 .driver = "Audigy2", .name = "Audigy 2 Value [Unknown]", 

sound/pci/emu10k1/emumixer.c

@@ -36,9 +36,14 @@
 #include <sound/core.h>
 #include <sound/emu10k1.h>
 #include <linux/delay.h>
+#include <sound/tlv.h>
+
+#include "p17v.h"
 
 #define AC97_ID_STAC9758	0x83847658
 
+static DECLARE_TLV_DB_SCALE(snd_audigy_db_scale2, -10350, 50, 1); /* WM8775 gain scale */
+
 static int snd_emu10k1_spdif_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
@@ -579,6 +584,162 @@ static struct snd_kcontrol_new snd_emu1010_internal_clock =
 	.put =          snd_emu1010_internal_clock_put
 };
 
+static int snd_audigy_i2c_capture_source_info(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_info *uinfo)
+{
+#if 0
+	static char *texts[4] = {
+		"Unknown1", "Unknown2", "Mic", "Line"
+	};
+#endif
+	static char *texts[2] = {
+		"Mic", "Line"
+	};
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 2;
+	if (uinfo->value.enumerated.item > 1)
+                uinfo->value.enumerated.item = 1;
+	strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int snd_audigy_i2c_capture_source_get(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.enumerated.item[0] = emu->i2c_capture_source;
+	return 0;
+}
+
+static int snd_audigy_i2c_capture_source_put(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
+	unsigned int source_id;
+	unsigned int ngain, ogain;
+	u32 gpio;
+	int change = 0;
+	unsigned long flags;
+	u32 source;
+	/* If the capture source has changed,
+	 * update the capture volume from the cached value
+	 * for the particular source.
+	 */
+	source_id = ucontrol->value.enumerated.item[0]; /* Use 2 and 3 */
+	change = (emu->i2c_capture_source != source_id);
+	if (change) {
+		snd_emu10k1_i2c_write(emu, ADC_MUX, 0); /* Mute input */
+		spin_lock_irqsave(&emu->emu_lock, flags);
+		gpio = inl(emu->port + A_IOCFG);
+		if (source_id==0)
+			outl(gpio | 0x4, emu->port + A_IOCFG);
+		else
+			outl(gpio & ~0x4, emu->port + A_IOCFG);
+		spin_unlock_irqrestore(&emu->emu_lock, flags);
+
+		ngain = emu->i2c_capture_volume[source_id][0]; /* Left */
+		ogain = emu->i2c_capture_volume[emu->i2c_capture_source][0]; /* Left */
+		if (ngain != ogain)
+			snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff));
+		ngain = emu->i2c_capture_volume[source_id][1]; /* Right */
+		ogain = emu->i2c_capture_volume[emu->i2c_capture_source][1]; /* Right */
+		if (ngain != ogain)
+			snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff));
+
+		source = 1 << (source_id + 2);
+		snd_emu10k1_i2c_write(emu, ADC_MUX, source); /* Set source */
+		emu->i2c_capture_source = source_id;
+	}
+        return change;
+}
+
+static struct snd_kcontrol_new snd_audigy_i2c_capture_source =
+{
+		.iface =	SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name =		"Capture Source",
+		.info =		snd_audigy_i2c_capture_source_info,
+		.get =		snd_audigy_i2c_capture_source_get,
+		.put =		snd_audigy_i2c_capture_source_put
+};
+
+static int snd_audigy_i2c_volume_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 255;
+	return 0;
+}
+
+static int snd_audigy_i2c_volume_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
+	int source_id;
+
+	source_id = kcontrol->private_value;
+
+	ucontrol->value.integer.value[0] = emu->i2c_capture_volume[source_id][0];
+	ucontrol->value.integer.value[1] = emu->i2c_capture_volume[source_id][1];
+	return 0;
+}
+
+static int snd_audigy_i2c_volume_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
+	unsigned int ogain;
+	unsigned int ngain;
+	int source_id;
+	int change = 0;
+
+	source_id = kcontrol->private_value;
+	ogain = emu->i2c_capture_volume[source_id][0]; /* Left */
+	ngain = ucontrol->value.integer.value[0];
+	if (ngain > 0xff)
+		return 0;
+	if (ogain != ngain) {
+		if (emu->i2c_capture_source == source_id)
+			snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff) );
+		emu->i2c_capture_volume[source_id][0] = ucontrol->value.integer.value[0];
+		change = 1;
+	}
+	ogain = emu->i2c_capture_volume[source_id][1]; /* Right */
+	ngain = ucontrol->value.integer.value[1];
+	if (ngain > 0xff)
+		return 0;
+	if (ogain != ngain) {
+		if (emu->i2c_capture_source == source_id)
+			snd_emu10k1_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff));
+		emu->i2c_capture_volume[source_id][1] = ucontrol->value.integer.value[1];
+		change = 1;
+	}
+
+	return change;
+}
+
+#define I2C_VOLUME(xname,chid) \
+{								\
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,	\
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |		\
+	          SNDRV_CTL_ELEM_ACCESS_TLV_READ,		\
+	.info =  snd_audigy_i2c_volume_info,			\
+	.get =   snd_audigy_i2c_volume_get,			\
+	.put =   snd_audigy_i2c_volume_put,			\
+	.tlv = { .p = snd_audigy_db_scale2 },			\
+	.private_value = chid					\
+}
+
+
+static struct snd_kcontrol_new snd_audigy_i2c_volume_ctls[] __devinitdata = {
+	I2C_VOLUME("Mic Capture Volume", 0),
+	I2C_VOLUME("Line Capture Volume", 0)
+};
+
 #if 0
 static int snd_audigy_spdif_output_rate_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
@@ -1179,7 +1340,9 @@ static int snd_emu10k1_shared_spdif_put(struct snd_kcontrol *kcontrol,
 	int change = 0;
 
 	spin_lock_irqsave(&emu->reg_lock, flags);
-	if (emu->audigy) {
+	if ( emu->card_capabilities->i2c_adc) {
+		/* Do nothing for Audigy 2 ZS Notebook */
+	} else if (emu->audigy) {
 		reg = inl(emu->port + A_IOCFG);
 		val = ucontrol->value.integer.value[0] ? A_IOCFG_GPOUT0 : 0;
 		change = (reg & A_IOCFG_GPOUT0) != val;
@@ -1317,6 +1480,22 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 		"AMic Playback Volume", "Mic Playback Volume",
 		NULL
 	};
+	static char *audigy_rename_ctls_i2c_adc[] = {
+		//"Analog Mix Capture Volume","OLD Analog Mix Capture Volume",
+		"Line Capture Volume", "Analog Mix Capture Volume",
+		"Wave Playback Volume", "OLD PCM Playback Volume",
+		"Wave Master Playback Volume", "Master Playback Volume",
+		"AMic Playback Volume", "Old Mic Playback Volume",
+		NULL
+	};
+	static char *audigy_remove_ctls_i2c_adc[] = {
+		/* On the Audigy2 ZS Notebook
+		 * Capture via WM8775  */
+		"Mic Capture Volume",
+		"Analog Mix Capture Volume",
+		"Aux Capture Volume",
+		NULL
+	};
 	static char *audigy_remove_ctls_1361t_adc[] = {
 		/* On the Audigy2 the AC97 playback is piped into
 		 * the Philips ADC for 24bit capture */
@@ -1409,6 +1588,10 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 		}
 		for (; *c; c++)
 			remove_ctl(card, *c);
+	} else if (emu->card_capabilities->i2c_adc) {
+		c = audigy_remove_ctls_i2c_adc;
+		for (; *c; c++)
+			remove_ctl(card, *c);
 	} else {
 	no_ac97:
 		if (emu->card_capabilities->ecard)
@@ -1422,6 +1605,8 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 	if (emu->audigy)
 		if (emu->card_capabilities->adc_1361t)
 			c = audigy_rename_ctls_1361t_adc;
+		else if (emu->card_capabilities->i2c_adc)
+			c = audigy_rename_ctls_i2c_adc;
 		else
 			c = audigy_rename_ctls;
 	else
@@ -1584,6 +1769,20 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 		if (err < 0)
 			return err;
 	}
+
+	if ( emu->card_capabilities->i2c_adc) {
+		int i;
+
+		err = snd_ctl_add(card, snd_ctl_new1(&snd_audigy_i2c_capture_source, emu));
+		if (err < 0)
+			return err;
+
+		for (i = 0; i < ARRAY_SIZE(snd_audigy_i2c_volume_ctls); i++) {
+			err = snd_ctl_add(card, snd_ctl_new1(&snd_audigy_i2c_volume_ctls[i], emu));
+			if (err < 0)
+				return err;
+		}
+	}
 		
 	return 0;
 }

sound/pci/emu10k1/io.c

@@ -30,6 +30,7 @@
 #include <sound/core.h>
 #include <sound/emu10k1.h>
 #include <linux/delay.h>
+#include "p17v.h"
 
 unsigned int snd_emu10k1_ptr_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn)
 {
@@ -167,6 +168,64 @@ int snd_emu10k1_spi_write(struct snd_emu10k1 * emu,
 	return 0;
 }
 
+/* The ADC does not support i2c read, so only write is implemented */
+int snd_emu10k1_i2c_write(struct snd_emu10k1 *emu,
+				u32 reg,
+				u32 value)
+{
+	u32 tmp;
+	int timeout = 0;
+	int status;
+	int retry;
+	if ((reg > 0x7f) || (value > 0x1ff)) {
+		snd_printk(KERN_ERR "i2c_write: invalid values.\n");
+		return -EINVAL;
+	}
+
+	tmp = reg << 25 | value << 16;
+	// snd_printk("I2C-write:reg=0x%x, value=0x%x\n", reg, value);
+	/* Not sure what this I2C channel controls. */
+	/* snd_emu10k1_ptr_write(emu, P17V_I2C_0, 0, tmp); */
+
+	/* This controls the I2C connected to the WM8775 ADC Codec */
+	snd_emu10k1_ptr20_write(emu, P17V_I2C_1, 0, tmp);
+	tmp = snd_emu10k1_ptr20_read(emu, P17V_I2C_1, 0); /* write post */
+
+	for (retry = 0; retry < 10; retry++) {
+		/* Send the data to i2c */
+		//tmp = snd_emu10k1_ptr_read(emu, P17V_I2C_ADDR, 0);
+		//tmp = tmp & ~(I2C_A_ADC_READ|I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD_MASK);
+		tmp = 0;
+		tmp = tmp | (I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD);
+		snd_emu10k1_ptr20_write(emu, P17V_I2C_ADDR, 0, tmp);
+
+		/* Wait till the transaction ends */
+		while (1) {
+			udelay(10);
+			status = snd_emu10k1_ptr20_read(emu, P17V_I2C_ADDR, 0);
+                	// snd_printk("I2C:status=0x%x\n", status);
+			timeout++;
+			if ((status & I2C_A_ADC_START) == 0)
+				break;
+
+			if (timeout > 1000) {
+                		snd_printk("emu10k1:I2C:timeout status=0x%x\n", status);
+				break;
+			}
+		}
+		//Read back and see if the transaction is successful
+		if ((status & I2C_A_ADC_ABORT) == 0)
+			break;
+	}
+
+	if (retry == 10) {
+		snd_printk(KERN_ERR "Writing to ADC failed!\n");
+		return -EINVAL;
+	}
+    
+    	return 0;
+}
+
 int snd_emu1010_fpga_write(struct snd_emu10k1 * emu, int reg, int value)
 {
 	if (reg < 0 || reg > 0x3f)

sound/pci/emu10k1/p17v.h

@@ -43,6 +43,53 @@
 #define P17V_I2C_ADDR		0x3d	/* I2C Address */
 #define P17V_I2C_0		0x3e	/* I2C Data */
 #define P17V_I2C_1		0x3f	/* I2C Data */
+/* I2C values */
+#define I2C_A_ADC_ADD_MASK	0x000000fe	/*The address is a 7 bit address */
+#define I2C_A_ADC_RW_MASK	0x00000001	/*bit mask for R/W */
+#define I2C_A_ADC_TRANS_MASK	0x00000010  	/*Bit mask for I2c address DAC value  */
+#define I2C_A_ADC_ABORT_MASK	0x00000020	/*Bit mask for I2C transaction abort flag */
+#define I2C_A_ADC_LAST_MASK	0x00000040	/*Bit mask for Last word transaction */
+#define I2C_A_ADC_BYTE_MASK	0x00000080	/*Bit mask for Byte Mode */
+
+#define I2C_A_ADC_ADD		0x00000034	/*This is the Device address for ADC  */
+#define I2C_A_ADC_READ		0x00000001	/*To perform a read operation */
+#define I2C_A_ADC_START		0x00000100	/*Start I2C transaction */
+#define I2C_A_ADC_ABORT		0x00000200	/*I2C transaction abort */
+#define I2C_A_ADC_LAST		0x00000400	/*I2C last transaction */
+#define I2C_A_ADC_BYTE		0x00000800	/*I2C one byte mode */
+
+#define I2C_D_ADC_REG_MASK	0xfe000000  	/*ADC address register */ 
+#define I2C_D_ADC_DAT_MASK	0x01ff0000  	/*ADC data register */
+
+#define ADC_TIMEOUT		0x00000007	/*ADC Timeout Clock Disable */
+#define ADC_IFC_CTRL		0x0000000b	/*ADC Interface Control */
+#define ADC_MASTER		0x0000000c	/*ADC Master Mode Control */
+#define ADC_POWER		0x0000000d	/*ADC PowerDown Control */
+#define ADC_ATTEN_ADCL		0x0000000e	/*ADC Attenuation ADCL */
+#define ADC_ATTEN_ADCR		0x0000000f	/*ADC Attenuation ADCR */
+#define ADC_ALC_CTRL1		0x00000010	/*ADC ALC Control 1 */
+#define ADC_ALC_CTRL2		0x00000011	/*ADC ALC Control 2 */
+#define ADC_ALC_CTRL3		0x00000012	/*ADC ALC Control 3 */
+#define ADC_NOISE_CTRL		0x00000013	/*ADC Noise Gate Control */
+#define ADC_LIMIT_CTRL		0x00000014	/*ADC Limiter Control */
+#define ADC_MUX			0x00000015  	/*ADC Mux offset */
+#if 0
+/* FIXME: Not tested yet. */
+#define ADC_GAIN_MASK		0x000000ff	//Mask for ADC Gain
+#define ADC_ZERODB		0x000000cf	//Value to set ADC to 0dB
+#define ADC_MUTE_MASK		0x000000c0	//Mask for ADC mute
+#define ADC_MUTE		0x000000c0	//Value to mute ADC
+#define ADC_OSR			0x00000008	//Mask for ADC oversample rate select
+#define ADC_TIMEOUT_DISABLE	0x00000008	//Value and mask to disable Timeout clock
+#define ADC_HPF_DISABLE		0x00000100	//Value and mask to disable High pass filter
+#define ADC_TRANWIN_MASK	0x00000070	//Mask for Length of Transient Window
+#endif
+
+#define ADC_MUX_MASK		0x0000000f	//Mask for ADC Mux
+#define ADC_MUX_0		0x00000001	//Value to select Unknown at ADC Mux (Not used)
+#define ADC_MUX_1		0x00000002	//Value to select Unknown at ADC Mux (Not used)
+#define ADC_MUX_2		0x00000004	//Value to select Mic at ADC Mux
+#define ADC_MUX_3		0x00000008	//Value to select Line-In at ADC Mux
 
 #define P17V_START_AUDIO	0x40	/* Start Audio bit */
 /* 41 - 47: Reserved */