V4L/DVB (12306): cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850

cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Documentation/video4linux/CARDLIST.cx23885

@@ -22,3 +22,4 @@
  21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295]
  22 -> Mygica X8506 DMB-TH                                 [14f1:8651]
  23 -> Magic-Pro ProHDTV Extreme 2                         [14f1:8657]
+ 24 -> Hauppauge WinTV-HVR1850                             [0070:8541]

drivers/media/video/cx23885/cx23885-cards.c

@@ -205,6 +205,11 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Magic-Pro ProHDTV Extreme 2",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1850] = {
+		.name		= "Hauppauge WinTV-HVR1850",
+		.portb		= CX23885_MPEG_ENCODER,
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -332,6 +337,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x14f1,
 		.subdevice = 0x8657,
 		.card      = CX23885_BOARD_MAGICPRO_PROHDTVE2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8541,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1850,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -491,8 +500,13 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 		/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
 		 * DVB-T and MPEG2 HW Encoder */
 		break;
+	case 85021:
+		/* WinTV-HVR1850 (PCIe, OEM, RCA in, IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+		break;
 	default:
-		printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
+		printk(KERN_WARNING "%s: warning: "
+			"unknown hauppauge model #%d\n",
 			dev->name, tv.model);
 		break;
 	}
@@ -742,6 +756,36 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x00060006);
 		mdelay(100);
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		/* GPIO-0 656_CLK */
+		/* GPIO-1 656_D0 */
+		/* GPIO-2 Wake# */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+		/* GPIO-19 IR_RX */
+		/* GPIO-20 C_IR_TX */
+		/* GPIO-21 I2S DAT */
+		/* GPIO-22 I2S WCLK */
+		/* GPIO-23 I2S BCLK */
+		/* ALT GPIO: EXP GPIO LATCH */
+
+		/* CX23417 GPIO's */
+		/* GPIO-14 S5H1411/CX24228 Reset */
+		/* GPIO-13 EEPROM write protect */
+		mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_14 | GPIO_13);
+		mdelay(100);
+
+		/* Bring the demod out of reset */
+		mc417_gpio_set(dev, GPIO_14);
+		mdelay(100);
+
+		/* CX24228 GPIO */
+		/* Connected to IF / Mux */
+		break;
 	}
 }
 
@@ -758,6 +802,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		/* FIXME: Implement me */
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
@@ -797,6 +842,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
@@ -864,6 +910,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */

drivers/media/video/cx23885/cx23885-dvb.c

@@ -866,6 +866,17 @@ static int dvb_register(struct cx23885_tsport *port)
 				&magicpro_prohdtve2_xc5000_config);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hcw_s5h1411_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[0].i2c_adap,
+				&hauppauge_tda18271_config);
+		break;
+
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
 			" isn't supported yet\n",

drivers/media/video/cx23885/cx23885.h

@@ -77,6 +77,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1210        21
 #define CX23885_BOARD_MYGICA_X8506             22
 #define CX23885_BOARD_MAGICPRO_PROHDTVE2       23
+#define CX23885_BOARD_HAUPPAUGE_HVR1850        24
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002