qlge: Move firmware event handler.

This is not a logical change but rather a move of the inbound firmware event
handler into it's own function as it will later be called by the outbound
path.
The addition of the mutex is to create exclusive access to the mailbox
commands between inbound and outbound handling.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/qlge/qlge.h

@@ -1407,6 +1407,7 @@ struct ql_adapter {
 
 	u32 mailbox_in;
 	u32 mailbox_out;
+	struct mutex	mpi_mutex;
 
 	int tx_ring_size;
 	int rx_ring_size;

drivers/net/qlge/qlge_main.c

@@ -3659,6 +3659,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work);
 	INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work);
 	INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work);
+	mutex_init(&qdev->mpi_mutex);
 
 	if (!cards_found) {
 		dev_info(&pdev->dev, "%s\n", DRV_STRING);

drivers/net/qlge/qlge_mpi.c

@@ -124,43 +124,75 @@ exit:
 	ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
 }
 
+/* Process an async event and clear it unless it's an
+ * error condition.
+ *  This can get called iteratively from the mpi_work thread
+ *  when events arrive via an interrupt.
+ *  It also gets called when a mailbox command is polling for
+ *  it's completion. */
+static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+
+	/* Just get mailbox zero for now. */
+	mbcp->out_count = 1;
+	status = ql_get_mb_sts(qdev, mbcp);
+	if (status) {
+		QPRINTK(qdev, DRV, ERR,
+			"Could not read MPI, resetting ASIC!\n");
+		ql_queue_asic_error(qdev);
+		goto end;
+	}
+
+	switch (mbcp->mbox_out[0]) {
+
+	case AEN_LINK_UP:
+		ql_link_up(qdev, mbcp);
+		break;
+
+	case AEN_LINK_DOWN:
+		ql_link_down(qdev, mbcp);
+		break;
+
+	case AEN_FW_INIT_DONE:
+		ql_init_fw_done(qdev, mbcp);
+		break;
+
+	case MB_CMD_STS_GOOD:
+		break;
+
+	case AEN_FW_INIT_FAIL:
+	case AEN_SYS_ERR:
+	case MB_CMD_STS_ERR:
+		ql_queue_fw_error(qdev);
+		break;
+
+	default:
+		QPRINTK(qdev, DRV, ERR,
+			"Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
+		/* Clear the MPI firmware status. */
+	}
+end:
+	ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+	return status;
+}
+
 void ql_mpi_work(struct work_struct *work)
 {
 	struct ql_adapter *qdev =
 	    container_of(work, struct ql_adapter, mpi_work.work);
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
-	mbcp->out_count = 1;
 
-	while (ql_read32(qdev, STS) & STS_PI) {
-		if (ql_get_mb_sts(qdev, mbcp)) {
-			QPRINTK(qdev, DRV, ERR,
-				"Could not read MPI, resetting ASIC!\n");
-			ql_queue_asic_error(qdev);
-		}
+	mutex_lock(&qdev->mpi_mutex);
 
-		switch (mbcp->mbox_out[0]) {
-		case AEN_LINK_UP:
-			ql_link_up(qdev, mbcp);
-			break;
-		case AEN_LINK_DOWN:
-			ql_link_down(qdev, mbcp);
-			break;
-		case AEN_FW_INIT_DONE:
-			ql_init_fw_done(qdev, mbcp);
-			break;
-		case MB_CMD_STS_GOOD:
-			break;
-		case AEN_FW_INIT_FAIL:
-		case AEN_SYS_ERR:
-		case MB_CMD_STS_ERR:
-			ql_queue_fw_error(qdev);
-		default:
-			/* Clear the MPI firmware status. */
-			ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
-			break;
-		}
+	while (ql_read32(qdev, STS) & STS_PI) {
+		memset(mbcp, 0, sizeof(struct mbox_params));
+		mbcp->out_count = 1;
+		ql_mpi_handler(qdev, mbcp);
 	}
+
+	mutex_unlock(&qdev->mpi_mutex);
 	ql_enable_completion_interrupt(qdev, 0);
 }