regulator: add buck3 in da903x driver

BUCK3 is the new component in DA9035. So there're three BUCKs in DA9035.
And there're two BUCKs in DA9034.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

drivers/regulator/da903x.c

@@ -64,6 +64,14 @@
 #define DA9034_MDTV2		(0x33)
 #define DA9034_MVRC		(0x34)
 
+/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */
+#define DA9035_OVER3		(0x12)
+#define DA9035_VCC2		(0x1f)
+#define DA9035_3DTV1		(0x2c)
+#define DA9035_3DTV2		(0x2d)
+#define DA9035_3VRC		(0x2e)
+#define DA9035_AUTOSKIP		(0x2f)
+
 struct da903x_regulator_info {
 	struct regulator_desc desc;
 
@@ -388,6 +396,27 @@ static struct regulator_ops da9034_regulator_ldo12_ops = {
 	.enable_bit	= (ebit),					\
 }
 
+#define DA9035_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+{									\
+	.desc	= {							\
+		.name	= #_id,						\
+		.ops	= &da9034_regulator_dvc_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= DA9035_ID_##_id,				\
+		.owner	= THIS_MODULE,					\
+	},								\
+	.min_uV		= (min) * 1000,					\
+	.max_uV		= (max) * 1000,					\
+	.step_uV	= (step) * 1000,				\
+	.vol_reg	= DA9035_##vreg,				\
+	.vol_shift	= (0),						\
+	.vol_nbits	= (nbits),					\
+	.update_reg	= DA9035_##ureg,				\
+	.update_bit	= (ubit),					\
+	.enable_reg	= DA9035_##ereg,				\
+	.enable_bit	= (ebit),					\
+}
+
 #define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit)	\
 	DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit)
 
@@ -435,6 +464,9 @@ static struct da903x_regulator_info da903x_regulator_info[] = {
 	DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0),
 	DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1),
 	DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */
+
+	/* DA9035 */
+	DA9035_DVC(BUCK3, 1800, 2200, 100, 3DTV1, 3, VCC2, 0, OVER3, 3),
 };
 
 static inline struct da903x_regulator_info *find_regulator_info(int id)

include/linux/mfd/da903x.h

 #ifndef __LINUX_PMIC_DA903X_H
 #define __LINUX_PMIC_DA903X_H
 
-/* Unified sub device IDs for DA9030/DA9034 */
+/* Unified sub device IDs for DA9030/DA9034/DA9035 */
 enum {
 	DA9030_ID_LED_1,
 	DA9030_ID_LED_2,
@@ -57,6 +57,8 @@ enum {
 	DA9034_ID_LDO13,
 	DA9034_ID_LDO14,
 	DA9034_ID_LDO15,
+
+	DA9035_ID_BUCK3,
 };
 
 /*